Remotesolution RH61A Touch Screen Remote Controller User Manual 2

Remote Solution Co., Ltd. Touch Screen Remote Controller 2

Contents

User Manual 2

Download: Remotesolution RH61A Touch Screen Remote Controller User Manual 2
Mirror Download [FCC.gov]Remotesolution RH61A Touch Screen Remote Controller User Manual 2
Document ID963233
Application IDuZRY8rK6ho+AO9LnndAuMQ==
Document DescriptionUser Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize336.12kB (4201539 bits)
Date Submitted2008-07-01 00:00:00
Date Available2008-07-01 00:00:00
Creation Date2008-07-01 13:35:42
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2008-07-01 13:35:50
Document TitleUser Manual 2
Document CreatorAdobe InDesign CS2 (4.0)

Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
When the TV power turns on, press the [VERIFY] icon.
Use the operation buttons on the screen to confirm
TV operation.
10
If all TV functions are operating, press the [EXIT] icon.
11
Press the [OK] icon to save.
I 28
Repeat steps 3~10 to set another device.
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I CODE LEARNING
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
Press the [Settings] icon on the screen.
Press the [LEARN] icon on the screen.
Press the [NEXT] icon on the screen.
The [Settings] screen appears.
Place remote and the original remote head to head.
29 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I 30
Select a device that you want to learn.
Press the button to be learned on the remote.
Press the button on the original remote control.
Press [EXIT] button to complete the procedure.
If there is a learn failure message, repeat Step 6~7 again.
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I SELECT SIGNAL BETWEEN IR/RF(Network Mode)
RF mode needs to be used together with models which are compatible with the TSR750.
(Model name : RHxx and ZRxx series)
This procedure needs to be proceeded after completing PAIRING THE REMOTE CONTROL WITH THE
RECEIVER Procedure. Otherwise, device can not be controlled through receiver.
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
Press the [Settings] icon on the screen.
Select [IR/RF] on the top menu bar.
The [Settings] screen appears.
All devices are selected as IR.
: IR OUTPUT
: RF OUTPUT
Press a device which you like to change.
Ex) TV
31 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I 32
The receiver connected through previous pairing
procedure is displayed.
Select a device. If you do not want, press [EXIT] button.
When complete, the icon of TV is changed to RF.
Press [EXIT] button to complete the procedure.
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I SELECT SIGNAL BETWEEN IR/RF (Stand_Alone Mode)
RF mode needs to be used together with models which are compatible with the TSR750.
(Model name : RHxx and ZRxx series)
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
Press the [Setting] icon on the screen.
Select [IR/RF] on the top menu bar.
The [Setting] screen appears.
All devices are selected as IR.
: IR OUTPUT
: RF OUTPUT
Press a device which you like to change.
Ex) TV
33 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I 34
Press [+] or [- ] to change RF Channel.
Press [OK] button to save RF channel.
Once it is completed, TV icon is changed to RF.
Press [EXIT] button to complete the procedure.
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I PAIRING THE REMOTE CONTROL WITH THE RECEIVER (Network Mode)
Receiver needs to be set up in advance according to the opearting(Network) section on the receiver
manual.
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
Press the [Setting] icon on the screen.
Select [NETWORK] on the top menu bar.
The [Setting] screen appears.
It will take around 15-30 sec. to join network.
In case of success in joining...
In case of failure joining...
In case of success
in joining, the find
devices procedure will
be proceeded.
35 I
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
Once procedure is completed, a device is displayed.
Compare the label on the bottom of the receiver with device
name.
If not the same, Press [Update] Button.
If the same, Press [EXIT] button to finalize procedure.
In case that device is not found, press [Update] button.
Note
■ RF Freguancy Range
Ch11: 2405MHz, Ch12: 2410MHz, Ch13: 2415MHz, Ch14: 2420MHz, Ch15: 2425MHz,
Ch16: 2430MHz, Ch17: 2435MHz, Ch18: 2440MHz, Ch19: 2445MHz, Ch20: 2450MHz,
Ch21: 2455MHz, Ch22: 2460MHz, Ch23: 2465MHz, Ch24: 2470MHz, Ch25: 2475MHz,
Ch26:2480MHz (16Channel, Fc)
I 36
Chapter 2 | Learning to Use the Menus
OPERATING SET-UP
I CONFIGURATION (TOUCH, EXTERNAL BUTTON SOUND Settings)
Press the [REMOTE] icon on the screen to open
the menu.
The [REMOTE] screen appears.
Press the [Settings] icon on the screen.
Press the [CONFIG] icon in the top menu bar.
Select the Touch or External Button to be modified, and
select a sound.
The [Settings] screen appears.
When settings are complete, press the [EXIT] icon to end.
37 I
Chapter 2 | Learning to Use the Menus
PHOTO
I PHOTO Function Buttons
2 3
ARROW
Moves [UP/DOWN/LEFT/RIGHT] in the preview screen.
OK
Opens the selected image file for viewing.
MENU
Opens a preview of the image in the Picture Frame folder.
EXIT
Ends the still image screen and begins the slide mode.
HOME
Moves to the Home screen.
CH , CH
CHANNEL
Plays the [Next/Previous] MP3 file.
VOL , VOL
VOLUME
Turns the volume of the currently playing MP3 file [Up/Down].
MUTE
Mutes the volume of the currently playing MP3 file.
OK
MENU
EXIT
I 38
Chapter 2 | Learning to Use the Menus
PHOTO
I PHOTO SET-UP (SLIDE MODE)
Touching the photo image on the screen moves to the PHOTO SET-UP.
DELAY
SLIDE
+, -
[Increases/Decreases] the delay time.
10
Displays the delay time.
MOVE
IN
OUT
CONTINUE
EXIT
Photo images appear from left to right.
Photo images appear from the outside edges inward to the center.
Photo images appear from the center outward to the outside edges.
Saves the settings and continues viewing.
Ends the photo display.
39 I
Chapter 2 | Learning to Use the Menus
PHOTO
I PHOTO DISPLAY
Press the [REMOTE] icon on the screen to open
the menu.
The [PHOTO] screen appears.
Photo images are automatically displayed.
Press the [MENU] button during display.
Move the cursor via the [UP/DOWN/LEFT/RIGHT]
buttons to the image to be used in the still screen.
Any MP3 files contained in the Picture Frame folder
are also played.
The image preview appears at the bottom of the
LCD screen.
The corresponding image can also be touched.
I 40
Chapter 2 | Learning to Use the Menus
PHOTO
After selecting the desired image, press the [OK] button.
To end the still screen and convert to slide mode, press
the [EXIT] button.
Press the product’s [
] button to end the photo mode.
The main screen appears.
41 I
Chapter 2 | Learning to Use the Menus
PHOTO
I Music File and Image File Saving
The following are instructions for using the PHOTO function of the remote control to save
image and music files.
Supported File Formats Music Files: MP3, WAV
Image Files: BMP, JPG, PNG
Turn the remote control power ON, and connect it to the
PC via the USB cable.
When the connection is complete, the ActiveSync
program opens.
Click the [Cancel] icon in the ActiveSync screen.
Note
■ Please refer to the manager help to save image or music file on remote control.
I 42
Chapter 2 | Learning to Use the Menus
UTILITY
I UTILITY Main Screen
Calendar
Calculator
Program Version
Game
43 I
Chapter 2 | Learning to Use the Menus
UTILITY
I Calendar
Displays the current year, month, day, and time.
I 44
Operation Icons
Moves to the next/previous month.
TODAY
Displays the current day.
EXIT
Ends the calendar function.
Chapter 2 | Learning to Use the Menus
UTILITY
I Calculator
Offers a calculator function.
BackSpace
Deletes entered numbers one at a time.
Resets the input field.
000
Multiplies the current number by 1000.
EXIT
Ends the calculator function.
I Program Version
Displays the current version of the installed program.
EXIT
Ends the program version function.
45 I
Chapter 2 | Learning to Use the Menus
UTILITY
I Game
I 46
START
Begins the PUZZLE game.
CONFIG
Controls the game settings.
SCORE
Displays the rank order of puzzle completion times.
EXIT
Ends the game function.
Chapter 2 | Learning to Use the Menus
UTILITY
I Game Settings
Level
Selects the game difficulty.
Number
Displays the number of the fragmented image.
Small Imge
Displays the image of the puzzle to be completed.
Image select
Selects the image to be used in the game.
OK
Saves the settings and returns to the main game screen.
47 I
Chapter 2 | Learning to Use the Menus
UTILITY
I Game Instructions
Press the [UTILITY] icon on the screen to open
the menu.
The [UTILITY] screen appears.
Press the [GAME] icon on the screen.
Press the [START] icon on the main game screen.
After the puzzle image to be completed is scrambled,
the game begins.
The [GAME] screen appears.
The game begins.
Drag and arrange the pieces to comprise the image
shown in the upper right of the screen to finish.
To end the game at any time, press the [EXIT] icon.
I 48
Chapter 2 | Learning to Use the Menus
SETTING
I SETTING Main Screen
Press the [SETTING] icon on the screen to open
the menu.
The SYSTEM SET-UP screen appears.
Select the SYSTEM, START PROGRAM,
CHARGING MODE, and DIMMING MODE settings.
49 I
Chapter 2 | Learning to Use the Menus
SETTING
I SYSTEM
I 50
BRIGHTNESS
Adjusts the LCD brightness.
SOUND
Adjusts the sound volume.
DATE & TIME
Adjusts the current time and day/month/year.
LCD TIME OUT
Sets the time period before the remote control is automatically
turned off.
To modify settings, select the corresponding part, and use the [+, -] buttons to adjust.
Chapter 2 | Learning to Use the Menus
SETTING
I START PROGRAM
SELECT A START
PROGRAM
Runs automatically upon product operation as set by the user.
51 I
Chapter 2 | Learning to Use the Menus
SETTING
I DISPLAY MODE SET-UP WHILE CHARGING
I 52
SELECT A DISPLAY
OPTION
PHOTO: Runs the PHOTO function of the remote control
CLOCK: Displays the current time and year, month, day
calendar
LAST SCREEN: Keep LCD screen
TURN OFF LCD: Turns off the LCD screen
Chapter 2 | Learning to Use the Menus
SETTING
I DIMING MODE
This function dims the LCD screen after a specified amount of time to reduce glare.


CONFIGURE THE
DIMING MODE
Turns the dimming mode ON/OFF.
DIMING ON TIME
Sets the time interval before automatic dimming of the remote
control LCD screen.
PERIOD
Sets the start time and end time for the dimming mode.
(24-hour based clock)
To modify settings, select the corresponding part, and use the [+, -] buttons to adjust.
53 I


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 27
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:16c60001-74e8-44bd-a414-a7369a6d2990
Modify Date                     : 2008:07:01 13:35:50+02:00
Create Date                     : 2008:07:01 13:35:42+02:00
Metadata Date                   : 2008:07:01 13:35:50+02:00
Document ID                     : uuid:5f61c450-72df-490d-b245-fb54a8291741
Format                          : application/pdf
Creator                         : Adobe InDesign CS2 (4.0)
Producer                        : Adobe PDF Library 7.0
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TX4RH61A

Navigation menu