Remotesolution SD01A Smart Home Sensor User Manual
Remote Solution Co., Ltd. Smart Home Sensor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2640791 |
| Application ID | RCjNdp4hoFBo5glQIBeQ1g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 175.45kB (2193184 bits) |
| Date Submitted | 2015-06-08 00:00:00 |
| Date Available | 2015-12-05 00:00:00 |
| Creation Date | 2014-12-22 13:51:52 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2014-12-22 13:51:53 |
| Document Title | 141222_2LM-SD01AA ì˜ë¬¸_메뉴얼 OUTLINE |
| Document Creator | Adobe Illustrator CS5 |
Wireless Movement Sensor Document Number : Rev. 1.0 Pairing Guide Pairing button ・Sensor is designed to try pairing when pull tab is initially removed Pairing button 3. Pull battery tab from the sensor to try pairing with the gateway. Press Pairing button on the sensors once. (The sensor will try pairing for 40seconds.) 1. Press pairing button on the gateway. 2. The orange LED will blink then the gateway turn into the pairing standby mode. (The orange LED will keep blink -ing for 60seconds.) 4. Once orange LED is off, pairing is done. Pairing failure The gateway and the sensor will try pairing for 40seconds. If they are failed to be paired within 40seconds, the orange LED will be off. Top case ・Low voltage communication and embedded RF amplifier can provide a wide range of communication. Battery holder Screw B (2ea) ・The sensor uses CR2032 coin cell battery. Battery lifetime is apporx. 5years. ・In case of damage, sensor can detects damage and notify Ethernet gateway. ・User can easily install using double sided tape. ( This product is working with ethernet gateway. ) Package Contents ・Movement sensor can report the gateway via radio communications door/window state, open or close by recognizing door movement. Introduction Please follow below instruction in case pairing is failed. 1. The sensors retry to pair with a red color LED blinking. 2. The method of the registration as pairing is done.(Should check the list on the smart phone.) ・User can edit the text regarding registered sensors on DSR application. Bottom cover Double sided tape Option Screw A (2ea) CR2032 Coin cell (1ea) Metal Pairing Pin (1ea) Please refer to this when changing the battery or using screws. Battery change Installation Guide 1 1 doubleAttach sided tape unscrew a screw. (see arrow) Replace battery with arrow direction. Open Top case Insert Remove Install on wall CR2032 Specifications How to fix using screws Dimensions L= 28mm, W= 54.5mm, H= 11.3mm Power source CR2032(3V) Lithium Battery 1ea Battery Lifetime 5 years at 25℃ (77℉), typical, Indoor use Operating Temperature 0℃ ~50℃, Indoor use Storage Temperature -10℃ ~ 60℃ Relative Humidity up to 95% non-condensing RF Performance Requirements Protocols : Zigbee HA Supported channels : IEEE802.15.4 CH11 to CH26 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip -ment generates, uses, and can radiate radio requency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep -tion, the user is encouraged to try to correct the interference by one or more of the following measures : • • Reorient or relocate the receiving antenna. Increase or decrease the separation be-tween the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that which the receiver is connected. • Consult the dealer or an experienced remote control/TV technician for help. • It is strongly recommended that the TV be plugg -ed into a separate wall outlet. The user is cautioned that changes and modifica -tions made to the equipment without the approval of the manufacturer could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two condi -tions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. “CAUTION” : Exposure to Radio Frequency Radia -tion. Antenna shall be mounted in such a manner to minimize the potential for human contact to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. [The sensor supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. “CAUTION” : Exposure to Radio Frequency Radia -tion. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance of 20cm between the radiator and your body. This transmit -ter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Format : application/pdf Title : 141222_2LM-SD01AA 영문_메뉴얼 OUTLINE Metadata Date : 2014:12:22 13:51:53+09:00 Modify Date : 2014:12:22 13:51:53+09:00 Create Date : 2014:12:22 13:51:52+10:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 196 Thumbnail Format : JPEG Thumbnail Image : (Binary data 15055 bytes, use -b option to extract) Instance ID : uuid:61185092-2506-407a-a805-e9eac9254999 Document ID : xmp.did:34BCF3E49389E411A64AD69F6F023E0A Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:31BCF3E49389E411A64AD69F6F023E0A Derived From Document ID : xmp.did:31BCF3E49389E411A64AD69F6F023E0A Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:13156DF141E5E311B7EDB94F9DAB4A8A, xmp.iid:15156DF141E5E311B7EDB94F9DAB4A8A, xmp.iid:5D406F16C1EAE311A726F4C65E922CC6, xmp.iid:3B590E00E02CE4118588DF2136CF4803, xmp.iid:683F4E697A65E411B7A4984894E0B8B9, xmp.iid:31BCF3E49389E411A64AD69F6F023E0A, xmp.iid:34BCF3E49389E411A64AD69F6F023E0A History When : 2014:05:27 10:55:13+09:00, 2014:05:27 11:20:40+09:00, 2014:06:03 10:47:57+09:00, 2014:08:26 15:27:38+09:00, 2014:11:06 15:12:48+09:00, 2014:12:22 13:35:02+09:00, 2014:12:22 13:51:47+09:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, / Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\Admin\Desktop\Untitled-1.png Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 166.367106 Max Page Size H : 136.371349 Max Page Size Unit : Millimeters Font Name : MyriadPro-Bold, MyriadPro-Semibold, MyriadPro-Regular, XFINITYSans-Lgt, AdobeMyungjoStd-Medium, YDIYGO130, YDIYGO120 Font Family : Myriad Pro, Myriad Pro, Myriad Pro, XFINITY Sans, Adobe 명조 Std, -윤고딕130, -윤고딕120 Font Face : Bold, Semibold, Regular, Light, M, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, TrueType Font Version : Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 1.000, Version 1.006;PS 1.003;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.00, Version 2.00 Font Composite : False, False, False, False, False, False, False Font File Name : MyriadPro-Bold.otf, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, XFINITYSans-Lgt.otf, AdobeMyungjoStd-Medium.otf, YGO130.TTF, YGO120.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 2 Creator : Adobe Illustrator(R) 15.0 For : Admin, Bounding Box : 657 -899 1702 -101 Container Version : 9 Creator Version : 15EXIF Metadata provided by EXIF.tools