Repeater Technologies RC1920C User Manual Chapter 5

Repeater Technologies Inc Chapter 5

Revised page chapter 5

Mounting the Repeater 5 550-1300-01 Rev 1 5-1 5.0 Installation Overview RTI repeaters are designed for indoor or outdoor permanent installation, and can be mounted on either a wall or a pole. The unit’s compact cabinet simplifies installation, and its aesthetically acceptable design means that it conforms to zoning standards in many locations. NOTE: Two people are recommended for mounting the repeater. NOTE: Only qualified service or technical personnel should install the repeater. NOTE: RTI repeaters are not intended for mobile operation, and must be placed in a fixed location. NOTE: A wall-mounting site must be selected such that the repeater is installed permanently to comply with the fixed location requirement. Furthermore, the antenna must be installed on a permanent outdoor structure or antenna tower and not connected directly to the repeater. NOTE: It is the responsibility of the operator of the station to ensure that the RF exposure requirements are meet for a particular installation including accounting for any co-located antennas. Figure 5-1 shows a typical repeater installation, with installed components.

Navigation menu