Repeater Technologies RC1920C User Manual Chapter 5
Repeater Technologies Inc Chapter 5
Contents
- 1. USER MANUAL
- 2. Additional Statement
- 3. Revised page chapter 4
- 4. Revised page chapter 5
Revised page chapter 5
![](/img.php?id=223333&img=bg1.png)
Mounting the Repeater 5
550-1300-01 Rev 1 5-1
5.0 Installation Overview
RTI repeaters are designed for indoor or outdoor permanent installation, and can be
mounted on either a wall or a pole. The unit’s compact cabinet simplifies installation, and
its aesthetically acceptable design means that it conforms to zoning standards in many
locations.
NOTE: Two people are recommended for mounting the repeater.
NOTE: Only qualified service or technical personnel should install the repeater.
NOTE: RTI repeaters are not intended for mobile operation, and must be placed in a
fixed location.
NOTE: A wall-mounting site must be selected such that the repeater is installed
permanently to comply with the fixed location requirement. Furthermore, the antenna
must be installed on a permanent outdoor structure or antenna tower and not connected
directly to the repeater.
NOTE: It is the responsibility of the operator of the station to ensure that the RF
exposure requirements are meet for a particular installation including accounting for any
co-located antennas.
Figure 5-1 shows a typical repeater installation, with installed components.