Resolution RE112 Wireless Smoke Detector User Manual RE112 GE Compat Smoke Instructions

Download:
Mirror Download [FCC.gov]
Document ID	2083284
Application ID	ICl0UETEIshe1n6h925PgA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	71.05kB (888163 bits)
Date Submitted	2013-09-26 00:00:00
Date Available	2013-09-26 00:00:00
Creation Date	2013-09-23 14:12:21
Producing Software	PDF Printer / www.bullzip.com / CP / Freeware Edition
Document Lastmod	2013-09-23 14:12:21
Document Title	RE112_GE-Compat_Smoke_Instructions
Document Author:	Martini

Specifications
Approval:
Smoke Sensitivity:
Wireless
Security
Solutions
RE112 GE-Compatible Smoke Sensor
DSC
Features
• UL217 Self-Contained Fire Alarm Device
• Senses Smoke per UL217
• Sleek design
• Cover tamper.
• Strong, reliable RF signal.
• 3-5 year battery life on Panasonic CR123A battery.
• Low Battery indication.
UL217 Self-Contained Fire Alarm Device
1.31 – 2.28 %/ft (UL 217)
0.11 – 0.165 dB/m (EN54-7)
Smoke Sensing Technology:
Photoelectric
Heat Alarm Point:
135 – 149 F (UL 521)
Alarm Sound:
Temporal Three
Replacement Battery:
Panasonic CR123A
Temperature Range:
32 to 120 F (Long Term)
Humidity:
10 – 85% Relative Humidity
Housing dimensions:
4.7 inch diameter, 2.1 inch high
Desing & Manufacture:
Resolution Products, Inc.
Specifications subject to change without notice.
Key Instructions
1. Attach the mounting plate
Locate on ceiling, as close to center as possible, away from corners.
Some local codes may allow wall mounting.
Mounting plate removes counter-clockwise
2. Insert battery with MINUS towards the RED lever. Close battery door.
3. Enroll sensor in panel:
a) Place panel in Learn Sensor mode
b) Press & release the black tamper switch
Sounder will continue beeping 3 times, until sensor is mounted.
4. Testing:
a) Place panel in Sensor Test mode
b) Press & hold TEST button until you hear the sounder beep.
c) Panel will indicate the sensor is open, but Fire Alarm will not sound.
NOTE: Using Smoke-in-a-Can will cause an actual Fire Alarm.
Pictures
Tamper
Mounting
Tabs
Smoke Sensing
Element
Operation
Situation
Sounder
LED
Actual smoke
Temporal 3
(Loud)
RED
(pulsing)
Press & hold
Test Button
Temporal 3
(Loud)
RED
(pulsing)
Sensor Open
signal to panel
Removing
Sensor from
Mount
Low Battery
Temporal 3
(Loud)
Orange
(steady)
Tamper/Trouble
signal to be sent
to panel.
Hourly Check
Wireless Signal
to Panel
Wireless Fire
Alarm Signal sent
to panel
Battery
Recovery
Silence an actual
alarm with the TEST
button. Sensor will
return to alarm if
smoke is still
present.
Sensor: Release
button.
Panel: Wait one
hour, or unmount &
mount sensor.
Restore by
remounting.
TEST Button
LED
Yellow
(pulsing)
Supervisories,
every hour
RE112_GE-Compat_Smoke_Instructions.doc Page 1 of 3
www.ResolutionProducts.com
30-Jul-13
RE112_GE-Compat_Smoke_Instructions.doc Page 2 of 3
www.ResolutionProducts.com
30-Jul-13
Notices
Verify proper enrollment and operation, per control panel installation instructions, at installation.
PHOTOELECTRIC SMOKE & HEAT USER'S MANUAL, which is included in device box, is an integral part
of the operating information of the RE112 device. However, this is NOT a heat device.
Approved as a self-contained fire alarm device per UL217. This represents the ability of each
individual sensor to sound locally upon sensed fire conditions.
“GE”, “Interlogix”, “Honeywell”, “2GIG”, “DSC”, “Napco” are trademarks owned by General Electric
Company, UTC Fire & Security Americas Corporation, Inc., Honeywell International Inc., 2GIG
Technologies Inc., Tyco Safety Products Canada LTD, Napco Security Systems respectively.
Resolution Products, Inc. products will function with one of either GE/Interlogix, Honeywell and
2GIG, DSC or Napco. However, no Resolution product is produced by, endorsed by, nor is officially
associated with any of these other manufacturers. Resolution recommends verifying proper
enrollment and operation, per control panel installation instructions, at installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first 5 years.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void
the user's authority to operate this equipment.
FCC ID: U5X-RE112
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence. Son
fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE112
RE112_GE-Compat_Smoke_Instructions.doc Page 3 of 3
www.ResolutionProducts.com
30-Jul-13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:920583d3-26df-11e3-0000-c52530335abd
Producer                        : PDF Printer / www.bullzip.com / CP / Freeware Edition
Modify Date                     : 2013:09:23 14:12:21-05:00
Create Date                     : 2013:09:23 14:12:21-05:00
Creator Tool                    : UnknownApplication
Document ID                     : uuid:920583d3-26df-11e3-0000-c52530335abd
Format                          : application/pdf
Title                           : RE112_GE-Compat_Smoke_Instructions
Creator                         : Martini
Author                          : Martini

EXIF Metadata provided by EXIF.tools