Resolution RE116 Wireless Siren, 319.5MHz User Manual RE116 GE Siren Instructions
Resolution Products, Inc. Wireless Siren, 319.5MHz RE116 GE Siren Instructions
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1645941 |
| Application ID | iM5+08tu7J4FoSZbQUPreA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.42kB (267764 bits) |
| Date Submitted | 2012-02-29 00:00:00 |
| Date Available | 2012-03-01 00:00:00 |
| Creation Date | 2012-02-20 02:16:49 |
| Producing Software | GPL Ghostscript 8.64 |
| Document Lastmod | 2012-02-20 02:16:49 |
| Document Title | RE116_GE_Siren_Instructions |
| Document Creator | PDFCreator Version 0.9.8 |
| Document Author: | bseemann |
Wireless Security Solutions RE116 Operation • Alarm Siren follows panel alarm pattern. Siren, GE®-Simon XT Compatible Features • Remote Wireless Siren • For operation with Simon XT • Responds to wireless alarm signal from panel • Panel supervises Siren & Siren (optionally) supervises Panel • Backup power on CR123A battery • Cover tamper • Unparalleled wireless range • Low Battery indication • 3x4x1.25 inches • Supervision Siren sends supervisory signals to panel IF: Siren has AC power. AND (if siren is set to supervise panel…) Siren has heard signal from panel in previous 60 minutes. • Tamper When battery cover is opened. Tamper Switch Function Switches Yellow LED • ON if AC present. • Flashes on hearing from Panel. Key Instructions • Requires either Resolution RE920 or RE922 Alarm Communicator Cards, which send wireless alarm signal. • Engage Battery by removing pink isolator tab. Battery “+” faces to right, away from tamper spring. • Mode 1: Panel supervises Siren & Siren supervises Panel Set switches • Press ENROLL switch on Simon Communicator board. Put Panel in Enroll Mode. Press & Release Siren Tamper to enroll Siren in Panel. Alternate Mode 2: Panel supervises Siren & Siren DOES NOT supervise Panel Set switches • Red LED • On if AC Present. • Flashes short ON when AC lost. • Flashes evenly ON/OFF in Enroll. Put Panel in Enroll Mode. Press & Release Siren Tamper to enroll Siren in Panel. Put Siren switches in RUN Mode: Battery “+” RE116_GE_Siren_Instructions.doc Page 1 of 4 www.ResolutionProducts.com 2/20/2012 RE116_GE_Siren_Instructions.doc Page 2 of 4 www.ResolutionProducts.com Battery isolator tab. Bemove. 2/20/2012 Notices Specifications Device Behavior: Supervisory Time Alarm Patterns: Alarm Sound Intensity Receiver: Transmitter> Electrical Connection: Mounting hardware: Terminal wire capacity: Replacement Battery: Temperature Range: Housing dimensions: Siren Supervision acts like a Door/Window Battery & Tamper 64-68 minutes Follows panel Siren ON/OFF Directly Shortest ON pulse: 250 ms Shortest OFF Pulse: 250 ms 85dB, minimum, at 1m Dual antenna diversity Dual antenna Dirersity US 2-prong Electrical outlet blades Secure with outlet plate mounting screw 16 Gauge CR123A 1550 mAH 0F to 120F 3x4x1.25 inches Specifications subject to change without notice. “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. Warranty Resolution Products, Inc. will replace products that are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE116 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: 1. Ce dispositif ne peut causer des interférences, et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. IC: 8310A-RE116 RE116_GE_Siren_Instructions.doc Page 3 of 4 www.ResolutionProducts.com 2/20/2012 RE116_GE_Siren_Instructions.doc Page 4 of 4 www.ResolutionProducts.com 2/20/2012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : cd933bea-5df6-11e1-0000-3be77b4dff1c Producer : GPL Ghostscript 8.64 Keywords : () Modify Date : 2012:02:20 02:16:49-06:00 Create Date : 2012:02:20 02:16:49-06:00 Creator Tool : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0008 Document ID : cd933bea-5df6-11e1-0000-3be77b4dff1c Format : application/pdf Title : \376\377\000R\000E\0001\0001\0006\000_\000G\000E\000_\000S\000i\000r\000e\000n\000_\000I\000n\000s\000t\000r\000u\000c\000t\000i\000o\000n\000s Creator : \376\377\000b\000s\000e\000e\000m\000a\000n\000n Description : () Author : bseemann Subject :EXIF Metadata provided by EXIF.tools