Resolution RE204 Driveway Transmitter, 345MHz User Manual RE204 Honeywell Compat Driveway Instructions

Resolution Products, Inc. Driveway Transmitter, 345MHz RE204 Honeywell Compat Driveway Instructions

User Manual

Page 1 of 3 www.ResolutionProducts.com 28-Jul-11 RE204_Honeywell-Compat_Driveway_Instructions.doc Wireless Security Solutions RE204 Honeywell-Compatible Driveway Sensor Features • For sensing Vehicles passing by. • Sensor continuously monitors earth’s magnetic field. When the large metal mass of a vehicle drives by, the earth’s magnetic field is twisted. The sensor then transmits a signal wirelessly to the control panel. • Immune to pets, wildlife, leaves, dust, sunlight. • NO DIGGING! • Weatherproof design handles all environments. • Strong, reliable RF signal. • 3-5 year battery life on C battery. • Low Battery indication. Key Instructions • Battery “+” face away from springs. Secure batteries with binder. • Use as a chime function. Do not use as an alarm zone. • Use 90-degree post mount bracket, or ground stake. • Mount sensor within 12 feet of target vehicle. Mount more than 24 feet from street. • Do not plug drain & air holes. Do not overtighten top. • Bumping the sensor will cause it to false (it thinks the world moved). • Performance Effects: Increased Response Decreased Response Close to vehicle Far from vehicle Higher (door handle level) Ground level Slow vehicle Fast vehicle Large metal vehicle Small vehicle with lots of plastic Jumper on Hi Sensitivity Jumper on Lo Sensitivity Generally, it shouldn’t matter which direction the sensor head is rotated. But turning it 90 degrees may cause some performance change +/-. • Enrolling:  Put panel in RF enroll mode.  Disconnect and then connect sensor battery. Special transmission occurs on power-up. Will enroll as Loop 2.  Use as a “Chime”, not an Alarm.  Supervision by panel is optional. Page 2 of 3 www.ResolutionProducts.com 28-Jul-11 RE204_Honeywell-Compat_Driveway_Instructions.doc Specifications Vehicle sense distance: 0 – 15 feet Mounting hardware: post flange or ground stake Replacement Battery: C-Cell Temperature Range: 0F to 120F [Note: high temperatures and high humidity can have a significant effect on alkaline battery performance.] Housing dimensions: 5.1 x 3.8 inches Specifications subject to change without notice. Exploded Picture Batteries secured by binder Magnetic sensor [ Loop 2 ] Push battery down towards spring, and release to cause enrollment transmission Do not pull antenna Jumper on Low Sensitivity Jumper on Medium Sensitivity Jumper on High Sensitivity
Page 3 of 3 www.ResolutionProducts.com 28-Jul-11 RE204_Honeywell-Compat_Driveway_Instructions.doc Notices “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. Warranty Resolution Products, Inc. will replace products that are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE204 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: 1. Ce dispositif ne peut causer des interférences, et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. IC: 8310A-RE204

Navigation menu