Resolution RE204 Driveway Transmitter, 345MHz User Manual RE204 Honeywell Compat Driveway Instructions
Resolution Products, Inc. Driveway Transmitter, 345MHz RE204 Honeywell Compat Driveway Instructions
User Manual
Page 1 of 3 www.ResolutionProducts.com 28-Jul-11
RE204_Honeywell-Compat_Driveway_Instructions.doc
Wireless
Security
Solutions
RE204 Honeywell-Compatible Driveway Sensor
Features
• For sensing Vehicles passing by.
• Sensor continuously monitors earth’s magnetic field. When the large
metal mass of a vehicle drives by, the earth’s magnetic field is twisted.
The sensor then transmits a signal wirelessly to the control panel.
• Immune to pets, wildlife, leaves, dust, sunlight.
• NO DIGGING!
• Weatherproof design handles all environments.
• Strong, reliable RF signal.
• 3-5 year battery life on C battery.
• Low Battery indication.
Key Instructions
• Battery “+” face away from springs. Secure batteries with binder.
• Use as a chime function. Do not use as an alarm zone.
• Use 90-degree post mount bracket, or ground stake.
• Mount sensor within 12 feet of target vehicle. Mount more than 24 feet
from street.
• Do not plug drain & air holes. Do not overtighten top.
• Bumping the sensor will cause it to false (it thinks the world moved).
• Performance Effects:
Increased Response Decreased Response
Close to vehicle Far from vehicle
Higher (door handle level) Ground level
Slow vehicle Fast vehicle
Large metal vehicle Small vehicle with lots of plastic
Jumper on Hi Sensitivity Jumper on Lo Sensitivity
Generally, it shouldn’t matter which direction the sensor
head is rotated. But turning it 90 degrees may cause some
performance change +/-.
• Enrolling:
Put panel in RF enroll mode.
Disconnect and then connect sensor battery. Special transmission
occurs on power-up. Will enroll as Loop 2.
Use as a “Chime”, not an Alarm.
Supervision by panel is optional.
Page 2 of 3 www.ResolutionProducts.com 28-Jul-11
RE204_Honeywell-Compat_Driveway_Instructions.doc
Specifications
Vehicle sense distance: 0 – 15 feet
Mounting hardware: post flange or ground stake
Replacement Battery: C-Cell
Temperature Range: 0F to 120F
[Note: high temperatures and high humidity can have a
significant effect on alkaline battery performance.]
Housing dimensions: 5.1 x 3.8 inches
Specifications subject to change without notice.
Exploded Picture
Batteries secured
by binder
Magnetic
sensor
[ Loop 2 ]
Push batter
y down
towards spring,
and release to
cause enrollment
transmission
Do not pull
antenna
Jumper on Low Sensitivity
Jumper on Medium Sensitivity
Jumper on High Sensitivity
Page 3 of 3 www.ResolutionProducts.com 28-Jul-11
RE204_Honeywell-Compat_Driveway_Instructions.doc
Notices
“GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell
International Inc., and Tyco Safety Products Canada LTD, respectively.
Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell
systems. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment
and operation, per control panel installation instructions, at installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first year.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could
void the user's authority to operate this equipment.
FCC ID: U5X-RE204
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence.
Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE204