Resolution RE352 Wireless Keypad, 433.92MHz User Manual RE352 DSC Compat PIN Pad
Resolution Products, Inc. Wireless Keypad, 433.92MHz RE352 DSC Compat PIN Pad
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1982410 |
| Application ID | 9nAuk7dO3wOqoMUSYw9yjA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 27.04kB (337956 bits) |
| Date Submitted | 2013-06-04 00:00:00 |
| Date Available | 2013-06-05 00:00:00 |
| Creation Date | 2013-05-29 17:38:02 |
| Producing Software | GPL Ghostscript 9.05 |
| Document Lastmod | 2013-05-29 17:38:02 |
| Document Title | RE352_DSC-Compat_PIN-Pad |
| Document Creator | PDFCreator Version 1.5.0 |
| Document Author: | bseemann |
Wireless Security Solutions Pictures TO CHANGE PIN CODE: Current 4-digit access code, and then… 1+3 Red LED,and then… Enter New Code RE352 DSC-Compatible PINpad™ Red/Green Status LED Shows command sent Features • Secure, 4-digit Code to disarm • 1-button arming • Red/Green LED arming feedback • Small, yet comfortable keypad • Mounts on wall via VHB® tape, or screws • Secure for carrying in purse or mounting on car visor • Strong, reliable RF signal. • 4-6 year battery life on CR2032 battery. Key Instructions • Enroll as a Key Fob. • • Code programming Default access code is “1234”. To change access code: 1. Enter current 4-digit access code. 2. Within 4 seconds, press and hold the “1” and “3” keys simultaneously. After 3 seconds, Red LED will be lit. 3. Enter new 4-digit access code. After successfully changing the code, the Green LED will be lit 4. Note new access code . BAD GUY CANNOT RESET CODE. So it must be noted and remembered! Enrolling: 1. Refer to the DSC control unit installation manual. 2. If panel is capable of Wireless Enrollment Mode, put the control panel in that mode and both the STAY or AWAY buttons for 3 seconds. Or, put panel in Serial Number Entry Mode and program in the printed ESN. 3. Set up as you would a WS4939 4-Button Fob. Stay + Away Panic (Enroll) Battery Replacement CR2032 Battery + Terminal up Operation PINpad Button Stay Away PIN Code Stay + Away RE352_DSC-Compat_PIN-Pad.doc Panel Action LED ARM STAY ARM AWAY DISARM PANIC ALARM flashes double red flashes double red twice flashes double green flashes red 8 times Page 1 of 3 www.ResolutionProducts.com Insert Screwdriver here to open 29-May-13 RE352_DSC-Compat_PIN-Pad.doc Page 2 of 3 www.ResolutionProducts.com 29-May-13 Specifications Secure replacement to a Not supervised. Replacement Battery: Temperature Range: Housing dimensions: 1-way RF: DSC WS4939 4-Button Key Fob. CR2032 Lithium / Manganese Dioxide 0F to 120F 2x2.25x0.33 inches Does not receive panel status Specifications subject to change without notice. Notices “GE”, “Honeywell”, “DSC”, “2GIG” and “Napco” are trademarks owned by General Electric Company, Honeywell International Inc., Tyco Safety Products Canada LTD, 2GIG Technologies Inc., and NAPCO Security Systems, Inc., respectively. Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. Warranty Resolution Products, Inc. will replace products that are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE352 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: 1. Ce dispositif ne peut causer des interférences, et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. IC: 8310A-RE352 RE352_DSC-Compat_PIN-Pad.doc Page 3 of 3 www.ResolutionProducts.com 29-May-13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:ede0bbee-cb0b-11e2-0000-03fbbb78cb65 Producer : GPL Ghostscript 9.05 Keywords : () Modify Date : 2013:05:29 17:38:02-05:00 Create Date : 2013:05:29 17:38:02-05:00 Creator Tool : PDFCreator Version 1.5.0 Document ID : uuid:ede0bbee-cb0b-11e2-0000-03fbbb78cb65 Format : application/pdf Title : RE352_DSC-Compat_PIN-Pad Creator : bseemann Description : () Author : bseemann Subject :EXIF Metadata provided by EXIF.tools