Reveal Media D5 Body Worn Camera User Manual D series quickstart 28p 86x126 3bleed 20170322v1 1

Reveal Media Limited Body Worn Camera D series quickstart 28p 86x126 3bleed 20170322v1 1

15_D5 UserMan r1

Download: Reveal Media D5 Body Worn Camera User Manual D series quickstart 28p 86x126 3bleed 20170322v1 1
Mirror Download [FCC.gov]Reveal Media D5 Body Worn Camera User Manual D series quickstart 28p 86x126 3bleed 20170322v1 1
Document ID3483769
Application IDh1sDYIg7J+J3KJGMWqUidg==
Document Description15_D5 UserMan r1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize81.62kB (1020258 bits)
Date Submitted2017-07-27 00:00:00
Date Available2017-07-27 00:00:00
Creation Date2017-03-22 18:25:36
Producing SoftwareAdobe PDF library 11.00
Document Lastmod2017-03-22 18:25:37
Document TitleD-series quickstart 28p 86x126 3bleed 20170322v1.1
Document CreatorAdobe Illustrator CC 2014 (Windows)

D-Series
With you on the front line
Quick Start Guide
V 1.1
RVL800-000025
D-Series Quick Start Guide
Contents
Introduction
Introduction
Congratulations on purchasing the D-Series
next generation body worn camera.
Quick start
Charge
Choose your Mount
Klickfast stud (using attach & removal tool)
Klickfast stud (attach & removal without tool)
Shirt / pocket clip
Record
This quick start guide will show you the
basics and get you up and running with
your D-Series camera in 3 easy steps.
NOTE: the reference to D-Series in this
guide covers both the D3 camera, and the
wireless enabled D5, except where
specifically stated otherwise.
Operation
Camera Articulation
Power ON / OFF
Playback (on camera)
Control buttons during Playback
Go back
Mark as Important
Stealth mode
Picture taking mode
LED light notification
Optional camera settings
Through DEMS
Without DEMS
DEMS administration window
Additional LED light notifications
Audio Mute
Allow manual mute
Do not allow manual mute
Always mute
Viewing camera settings
WiFi mode (D5 only)
Charge
Mount
Record
Charge your camera for six hours
until the charging light turns green.
Choose how to mount your camera
using either a single combination
shirt/pocket clip, or a klickfast stud.
Slide the red switch down to start
recording. To stop recording, slide
the red switch up.
Product conformance
Technical specifications
Notes
D-Series - Quick Start Guide
D-Series - Quick Start Guide
Quick start
Quick Start
Charge
Klickfast stud (using attach & removal tool)
The USB charging and data connector is located at the
bottom of the camera. Any standard USB wall charger
can be used to charge the D-series with the USB cable
supplied in the box.
The D-Series camera is supplied with a small tool in box to
assist attachment and removal of the klickfast stud. Simply
align the tool with the klickfast stud and the groove on rear of
D-Series, and push upward to click stud into place.
Waterproof
micro USB
connector
Attachment/
Removal tool
Charge your camera until the LED indicator on top of
the unit lights green. The D-Series takes approximately
6 hours with a fast charger. For a standard charger this
would take longer to reach full charge, or shorter
connected to a USB fast charger.
Slide into groove
and click to place
The D-Series can also be charged directly from the
Reveal D-Series docking station for guaranteed fast
charging.
Attach klickfast
using tool.
Choose your mount
The rear of the D-Series has a moulded groove slot
which allows the attachment of clip mount accessories
to the camera. Mounting options supplied in the box
are:
The same tool can be used to remove the
attached stud from the camera, this time
placing the tool from the top of secured
klickfast and pushing downwards to
release the stud.
release
stud.
Used
forthe
helmet
1. Klickfast stud
2. Reveal single combination shirt/pocket clip
D-Series - Quick Start Guide
Klickfast mount
D-Series - Quick Start Guide
Remove klickfast
using tool.
Quick start
Quick start
Klickfast stud (attach & removal without tool)
Shirt / pocket clip
The klickfast stud can also be attached by pushing the clip
into place without using the tool. Removal of the klickfast
stud requires a flat head screwdriver, which is used to lever
up the clip tongue, and the gently slide downwards to
remove.
To attach the shirt clip, simply
align the attachment to the rear
groove on the D-Series and slide
and clip, as per diagrams below.
Slide into groove
and click to place
Klickfast mount
Slide shirtclip mount
Slide into groove
and click to place
To remove the shirt clip, use a flat head screw driver to
carefully lever up the clip tongue, and then gently slide
downwards to remove.
Remove klickfast
using screwdriver.
D-Series - Quick Start Guide
Remove shirtclip
using screwdriver.
D-Series - Quick Start Guide
Quick start
Operation
Record
Camera Articulation
To record video footage, simply slide the red switch
down to start capturing.
The D-Series camera head is able
to rotate horizontally and vertically
within limits. However, DO NOT
OVER ROTATE!
The D-Series will beep 3 times in quick succession to
indicate it has started recording, and the LED on the
shoulder of camera will start flashing red to indicate it
is recording. A flashing red dot on the camera display
will also indicate that the camera is recording.
The D-Series camera head does not
rotate 360 degrees. Forcing it will
cause damage to the camera head.
Power ON / OFF
Power ON the unit by pressing the
FUNCTION button (button 2) for 1
second. The D-Series will sound a
welcome chime, and open into
preview mode.
In preview mode you can orientate
the camera head ready for
recording, view display and detail
such as recording resolution, time
and date, storage capacity
Power OFF the unit by pressing and
holding the same FUNCTION button
for 2 seconds.
NOTE: the D-Series does not need to be powered on to
start recording. Simply slide down the red switch to
start recording.
NOTE: The D-Series can also be powered up from the off
position by sliding down red record slider. This action powers
up the camera and starts recording immediately.
To stop recording, simply slide the red switch up.
D-Series - Quick Start Guide
D-Series - Quick Start Guide
Operation
Operation
Playback (on camera)
Go back
Press the FUNCTION button to turn the camera on, and then
press the PLAY button (button 9) to open playback mode.
Press the FUNCTION button to leave the playback mode and
return to preview screen.
In the playback menu, any recorded video footage in the
camera is displayed as thumbnails on the display screen.
Press the FUNCTION button twice to exit the Enter Pin screen
and return back to preview screen.
Control buttons during
Playback
Mark as Important
• Button 6, is the Rewind button.
While recording, press the
STOP button once to mark
the video as important.
• Button 7, is the Fast Forward button
• Button 8, is the Stop button
• Button 9 is the Play button.
In the playback menu, use
the FF and REW buttons to
scroll and highlight
thumbnails (highlighted in
yellow border), then press
PLAY to playback footage on
the D-Series camera.
During playback the user can
Rewind footage by pressing
button 6, and fast forward by
pressing button 7.
The symbol will appear in
the bottom right corner of
the screen.
In playback mode, select
the desired thumbnail then
press the STOP button to
mark video as important.
The symbol will appear in
the bottom right corner of
the thumbnail.
Both Rewind and Fast forward can increased in speed
increments from and initial 1x speed to 4x 16x and 64x by
subsequent pressing on REW FFW buttons.
D-Series - Quick Start Guide
10
D-Series - Quick Start Guide
11
Operation
Operation
Stealth mode
Picture taking mode
In this mode, the D-Series displays no image on screen and
the red LED is not lit. The D-Series appears off! There are no
audio alarms except for the power on chime.
The D-Series can take single image photos when in either
preview mode (i.e. not recording) or in pre-record mode (also
not recording) by pressing the FUNCTION button (i.e. button
2) and button 5 on the right of the device screen
simultaneously.
To activate stealth mode on the D-Series,
• Press and hold button 4 (i.e. middle button on right hand
side) for TWO seconds.
• To deactivate stealth mode repeat the above step by
pressing and holding button 4 for a further TWO seconds
This activates and deactivates the Stealth mode whilst the
unit is in either recording or record preview mode.
Press both buttons
simultaneously
NOTE (D3 only): Button 5 is
also a stealth button, and
long press (i.e. for two
seconds) on either button 4
or 5 will switch camera into
stealth mode.
A picture will be taken and placed in the DCIM folder, and
pictures can be viewed in the playback mode by pressing the
Play button and navigating to the appropriate thumbnail.
D-Series - Quick Start Guide
12
D-Series - Quick Start Guide
13
Operation
Optional camera settings
LED Light Notification
Through DEMS
DEMS is Reveal’s industry leading digital evidence
management platform built to securely store, manage and
export digital evidence, large or small, whilst always
remaining incredibly simple and easy to use.
Power on
Solid red light
In the DEMS administration
window select the Reveal
camera settings tab
NOTE:
Requires DEMS 360 or later.
Recording
Flashing red light
Without DEMS
Charging
For users without DEMS, camera
settings can be changed on the
camera using the Reveal Camera
Manager tool.
Solid blue light
The tool is designed to work with Microsoft Windows and can
be downloaded from the Reveal website –
http://hub.revealmedia.com/files/clients/rcm/latest-release/
Fully charged
Solid green light
D-Series - Quick Start Guide
14
D-Series - Quick Start Guide
15
Optional camera settings
Optional camera settings
DEMS adminstration window
Additional LED Light Notification
USER
RETENTION POLICY
MEDIA CATEGORIES
TEAMS
LIBRARY
CAMERA SETTINGS
REVEAL CAMERA ENCRYPTION
CASES
ADMINISTRATION
USER ROLES
DEPARTMENTS
EMAIL SETTINGS
AUDIT LOG
BOOKING LOG
LOCATIONS
USER PERMISSIONS
NOTIFICATIONS
LICENCE
ERRORS
REPORTS
LOGOUT
FILES IN TRANSFER
SETTINGS
CAMERA SETTINGS
The following LED light notifications result from interaction
with the Reveal DEMS software solution (or Reveal Camera
Manager - RCM). Full explanation regarding the features that
utilise these notifications on the D-Series can be found in the
DEMS and RCM User guides.
ENABLE ALL CAMERA MENU OPTIONS TO BE CONTROLLED BY DEMS
RECORDING EXTENSION
MP4
LANGUAGE
ENGLISH
RESOLUTION
1280x720/30F
WHITE BALANCE
AUTO
DATE/TIME STAMP
On
SYNC DATE/TIME WITH PC
On
AUDIO ALARM
On
PRE-RECORD
Off
PRE-RECORD MUTE
Off
AUDIO MUTE
No Manual Mute
LCD OFF
Off
STEALTH MODE
Off
RECORD OFF MODE
Slider
PROTECTED MODE
Off
TRUSTED MODE
Off
TRUSTED UNLOCK PASSWORD
CAMERA SCREEN DATA UPPER LEFT
Orange LED notification
Paired to smartphone
(D5 only)
Cyan LED notification
Connected to WiFi
(D5 only)
Purple LED notification
Camera error reporting
(8 DIGITS REQUIRED)
None
CAMERA SCREEN DATA UPPER RIGHT
None
CAMERA SCREEN DATA LOWER LEFT
None
SUBMIT
Pre-Recording
White LED notification
RESTORE DEFAULT SETTINGS
© 2017 Reveal Media Limited.
D-Series - Quick Start Guide
NOTE: for some notifications the LED will flash alternate
colours depending on the camera state.
Privacy Policy | Version 4.1.0
16
D-Series - Quick Start Guide
17
Optional camera settings
Optional camera settings
Audio Mute
• An Audio beep is heard
(not heard on camera)
Audio mute allows users a way to mute the audio while
recording video, and here are three modes in which audio
mute can function. The modes are set through DEMS 360,
or RCM.
• Icon showing a muted
microphone is shown on
screen. See location on
pre-record screens below
for exact placement.
1. Allow manual mute
2. Do not allow manual mute
3. Always mute
• No audio is recorded
• Pressing the Audio button
unmutes recording and
icon disappears (audio
beep is heard)
Allow manual mute: (mute can be
activated/deactivated on camera)
When in power up (preview) or record, the user presses the
Audio button (4) (just a quick press) ) once to toggle the
device between audio mute on and off.
Do not allow manual mute
Mute facility cannot be activated through the button on the
device.
Always mute
When in power up (preview) or record audio is always muted.
D-Series - Quick Start Guide
18
D-Series - Quick Start Guide
19
Optional camera settings
Optional camera settings
Viewing camera
settings
Wifi mode (D5 only)
Firmware Version
The D-Series allows you to view
the settings currently active in
the camera. Press the Menu
button (button 3) to display the
menu list of settings currently
set in the camera.
NOTE: menu items cannot be set
directly from the camera, and
must be set remotely using a
computer or mobile application.
Hold down button 5 to access the wifi mode menu.
RESOLUTION
PRE RECORDING
Pre Record Mute
AUDIO ALARMS
WIFI MODE
Date&Time
1. WiFi off
Stealth
2. Upload
UnitID
3. Phone App
Trusted mode
4. Stream
Record Mode
Audio Mute
Access Point IDs
Stream
Navigating the menu items:
The WiFi functionality is set from the camera. The three
modes of operation below defined for this mode:
• To move UP and/or DOWN
on menu items press the
FWD/RW buttons (i.e.
buttons 6 and 7)
respectively.
• To expand on a menu item
to check status, press the
PLAY button (button 9).
• To collapse back to menu
items only, press the
FUNCTION button
(button 2).
To exit the menu display,
press the FUNCTION button
(button 2) to return back to
main camera view.
Option
Description
WiFi OFF
Normal camera operation – WiFi is
switched off.
Upload
Upload Mode. WiFi is switched on as a
client.
Phone App
App mode – WiFi is in Access Point mode.
Stream
Streaming mode – WiFi is switched on as a
client device.
D-Series - Quick Start Guide
20
D-Series - Quick Start Guide
21
Product conformance
Product conformance
FCC Statement
The D-Series complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
How to recycle your equipment
The symbol shown here and on the packaging
means that the product is classed as electrical or
electronic equipment, so DO NOT put it in your
normal garbage bin.
It’s all part of the Waste Electrical and Electronic Equipment
(WEEE) directive to recycle products in the best way, and get
rid of dangerous things more safely.
The D-Series has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
You should contact your retailer, supplier, or local city office
for advice on how to dispose of this product in an
environmentally friendly way.
Reduction of hazardous substances
This product is compliant with the EU Registration,
Evaluation, Authorization and Restriction of Chemicals
(REACH) Regulation (Regulation No 1907/2006/EC) and the
EU Restriction of Hazardous Substances (RoHS) Directive
(Directive 2011/65/EU).
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Radio Equipment Directive (RED)
The D-Series product is compliant with the
requirements of the Radio Equipment Directive
(2014/53/EU).
Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to
operate the equipment.
RF Exposure
operate
the equipment.
Information
This
equipment
complies with FCC radiation exposure limits set forth
RF Exposure
Information
Thisan
for
equipment
uncontrolled
complies
environment
with FCC
and
radiation
can be used/operated
exposure limits in
set forth
for
an
uncontrolled
environment
and can
used/operated
in
portable operating conditions
without
anybe
restrictions.
For detailed
portable
operating
conditions
restrictions.
SAR
information,
please
checkwithout
the FCCany
ID: 2AL26-D5
onFor
fccdetailed
website.
The
up position
for SAR
shall
minimum
5mm. on fcc website.
SAR face
information,
please
check
thebe
FCC
ID: 2AL26-D5
D-Series - Quick Start Guide
22
D-Series - Quick Start Guide
23
Technical specifications
Technical specifications
The D-Series is a fully featured camera in the Reveal product
family featuring high performance video capture and
on-board playback and long battery life as well as a host of
connected features.
Dimensions
H: 100mm W: 60mm D: 26mm
(thickness of device)
Power/Data
connection
MicroUSB connector: Waterproof with
metal shield for damage prevention
LCD display dimensions
2.0” 4x3 262K colors (960x240
pixels), with dimmable
backlight
Wifi (D5 only)
802.11n (A/B/G/N) 2.4GHz and 5.8GHz
Bluetooth (D5 only)
BLE 4.0
Battery type
Lithium Polymer
Battery life
480p: up to 12hrs
Field of View
110 Degrees (Horizontal),
50 Degrees (vertical)
Vibration notifications
Yes
Weight
Max 155g
Camera head
Total horizontal rotation: 305°
720p: up to 11hrs
1080p TBC
Battery charge time 6 hours (at standard charging rate)
(from flat)
Left rotation: 105°, Right
rotation: 200°
Still picture capture Yes (JPEG)
Total vertical rotation: 174°
Buttons
One record button with
mechanical click on activation,
One Power
(Evidence/Back/Reset) button
and 3 software programmable
buttons on the side, 4 buttons
on the front including a Stop,
Play, Rewind and Fast forward
button
D-Series - Quick Start Guide
24
Recording
Resolutions
480p / 720p / 1080p
Recording Formats
MPEG-4 (video codec H.264)
Storage capacity
32GB or 64GB EMMC
(Non-removable)
Encryption
AES 256 Encryption
Working
temperature range
"-10C° to 45C°
D-Series - Quick Start Guide
25
Notes
Notes
D-Series - Quick Start Guide
26
D-Series - Quick Start Guide
27

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Format                          : application/pdf
Title                           : D-series quickstart 28p 86x126 3bleed 20170322v1.1
Creator Tool                    : Adobe Illustrator CC 2014 (Windows)
Create Date                     : 2017:03:22 18:25:36+03:00
Modify Date                     : 2017:03:22 18:25:37+02:00
Metadata Date                   : 2017:03:22 18:25:37+02:00
Thumbnail Width                 : 256
Thumbnail Height                : 16
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 3708 bytes, use -b option to extract)
Document ID                     : xmp.did:207470ba-ada7-ab46-b6af-8a1f8274748a
Instance ID                     : uuid:006344d3-5e0d-4428-a295-24d50b83bca5
Rendition Class                 : proof:pdf
Original Document ID            : uuid:A725CD73761BE1118C20F6F6EB6509DC
Derived From Instance ID        : xmp.iid:1c1364da-e915-204a-8acb-de3bc76faeb0
Derived From Document ID        : xmp.did:1c1364da-e915-204a-8acb-de3bc76faeb0
Derived From Original Document ID: uuid:A725CD73761BE1118C20F6F6EB6509DC
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:C7585C9CE85DE311B7D5B717FBCD79A8, xmp.iid:207470ba-ada7-ab46-b6af-8a1f8274748a
History When                    : 2013:12:05 22:05:38+02:00, 2017:03:22 18:25:34+02:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2014 (Windows)
History Changed                 : /, /
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 177.999990
Max Page Size H                 : 131.999987
Max Page Size Unit              : Millimeters
Font Name                       : Montserrat-Bold, Montserrat-Regular
Font Family                     : Montserrat, Montserrat
Font Face                       : Bold, Regular
Font Type                       : Open Type, Open Type
Font Version                    : Version 2.001, Version 2.001
Font Composite                  : False, False
Font File Name                  : Montserrat-Bold.ttf, MONTSERRAT-REGULAR.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Default Swatch Group
Swatch Groups Group Type        : 0
Producer                        : Adobe PDF library 11.00
Page Count                      : 14
Creator                         : Adobe Illustrator CC 2014 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AL26-D5

Navigation menu