Revogi Innovation SGW001 Smart Sensor Gateway with Sub-G and Wi-Fi User Manual 2
Revogi Innovation Co., Ltd. Smart Sensor Gateway with Sub-G and Wi-Fi 2
User Manual
1. Open the back cover 2. Load the 6LR61 9V battery
3. Close back cover 4. Mount on ceiling
Red flashing Alarm
Reset Button Press to stop the alarm
Smart Sensor Gateway
Pairing Button
Trigger the Smart Sensor Gateway to alarm when detecting any
smoke.
3. AddSmart Sensor Gateway
Smart Sensor Gateway
Smart Button
Smart Button
Smart Button
Smart Button
Indicator
Reset Button
Smart Sensor
Gateway
Smart Button
Smart Sensor
Gateway
Trigger the Smart Sensor Gateway to ring door bell by pressing the
button.
Smoke Detector
Smoke Detector
Smart Sense Kit
for Smart Sensor Gateway User Manual
Quick Installation Guide
About Specification Product Introduction
1. Download APP
Quick Instruction
2. Plug into the power outlet
Thanks for your choice of Revogi Smart Sense Kit. This is a quick
installation guide for you. Please read this entire guide attentively
before using our products. Revogi Smart Sense Kit centers on
Smart Sensor Gateway, co-works with Door Sensor, Motion
Sensor, Smart Button and Smoke Detector. After some simple
configurations, one can use Smart Sense Kit to remotely monitor
indoor temperature, humidity, pressure, ambient light, noise level, etc,
cooperate with other Revogi devices to bring safety and smart life into
your home.
Smoke Detector
Door Sensor MotionSensor Smart Button
Revogi Smart Sensor Gateway features the control center of the Smart
Sense Kit, and the sensors can be linked with more smart devices via
Smart Gateway.
Door Sensor
Monitor doors and windows by sensing opening and closing between
the main part and the magnet.
Sense the movement in the surrounding environment by infrared
detection.
Motion Sensor
Indicator
Pairing Button
Indicator Pairing Button
Indicator
Pairing Button
Indicator
Magnet Main Part
Reset Button
Touch Button
Loudspeaker
Light Induction Zone
Smoke Detector
Indicator
Button
Scan with your smartphone or tablet or search for "RevogiHome"
in the App Store or Google Play.
Download RevogiHome, sign up or log in directly.
Android: more than 800x480 resolution, Android 4.3+;
iOS: iOS8.0+
Make sure your smartphone or tablet is connected to the Wi-Fi. Tap
Add new device below the app page and select Smart Sense, then
follow the prompts to configure your device.
4. AddSensors
Put finger on the Touch button of the Smart Sensor Gateway or tap Add
New Sensor in the Smart Sense page to start the pairing, then use a
needle to press the paring button on the sensor, an voice prompt
"The sensor is paired" and the gateway indicator stays blue will
indicate the pairing successful.
1. Open back cover
1. Open back cover
2. Take off the insulating spacer
3. Colse back cover
1. Load battery with 2pcs AA 2. Mount the bracket, Scew on
2. Take off the insulating spacer
3. Colse back cover 4. Less than 22mm
For technical support please visit:www.revogi.com/support
Or email:support@revogi.com
Press to pair
Press to pair
Press to pair
Press to pair
Pairing Button
Pairing Button
Pairing Button
Pairing Button
Indicator Description Status
Ready for connect
network
Quick green flashing
(4 times per sec)
Stays green for 5s then off
Slow green flashing
(twice per sec)
Quick blue flashing
(4 times per sec)
Stays blue for 5s then off
Open / Close
New sensor pairs
successfully
Ready for paring sensor
Connecting network
Device successfully
connected with router
Blue flashing(once)
Blue flashing(once)
Blue flashing(once)
Ring
Trigger
Button Function
Touch Button
Reset Button
Slight touch: De-alerting
Long touch: Entering pairing mode
Long press till green light flashes quickly
120°
5m
5m
120°
5m 5m
Motion Sensor
Smoke Detector
Door Sensor
Door SensorMotion Sensor Smoke Detector
9V
9V
Model: SSW005
Power Source: 6LR61 9V (included)
Battery Lifespan: 5 years
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Smoke Detector
Model: SSW002
Power Source: CR2032 (included)
Battery Lifespan: 5years(10 times trigger per day)
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Door Sensor
Model: SSW003
Power Source: AA size, LR6 type, 2PCS (included)
Battery Lifespan: 2 years (100 times trigger per day)
Field of View/ Focal Length: 120 degrees, 5M
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Motion Sensor
Model: SSW004
Power Source: CR2032 (included)
Battery Lifespan: 5years(10 times trigger per day)
Range: 70M, 230Ft Min.(depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Smart Botton
Smart Sensor Gateway
Model: SGW001
Power Source: DC 5V1A
Humidity Measurement: 5 to 95% RH, Tolerance: ±4%
Pressure Measurement: 300 to 1200mbar, Tolerance: ±3mbar
Ambient Light Measurement: 0-83000lux, Tolerance: ±3%
Noise Measurement: 30-130db, Tolerance: ±3%
Communication Protocol: WiFi-868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
Note:This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your body.