Rheem Classic Series Package Heat Pump Submittal Sheet

Rheem-Classic-Series-Package-Heat-Pump-Submittal-Sheet-684028 rheem-classic-series-package-heat-pump-submittal-sheet-684028

: Rheem Rheem-Classic-Series-Package-Heat-Pump-Submittal-Sheet-684025 rheem-classic-series-package-heat-pump-submittal-sheet-684025 rheem pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

SUBMITTAL COVER SHEET
PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY

______________________________ DATE ________________________________________

UNIT SUMMARY
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number

ACCESSORIES:

PRINTED IN U.S.A.

NOTES:

10-06 DC

FORM NO. X11-1123 REV. 2
Supersedes Form No. X11-1123 Rev. 1

FORM NO. X33-1234 REV. 1
Supersedes Form No. X33-1234

SUBMITTAL SHEET FOR PACKAGE HEAT PUMPS
FEATURING EARTH-FRIENDLY R-410A REFRIGERANT:
RQNL- HIGH EFFICIENCY 13 SEER SERIES
RQPL- HIGH EFFICIENCY 14 SEER SERIES
Nominal Sizes 2 Thru 4 Tons [7.03 thru 14.07 kW]
JOB NAME

DATE

CONTRACTOR

UNIT DESIGNATION

ENGINEER

MODEL NO.

SUBMITTED FOR

APPROVAL

SUBMITTED BY

RECORD LOCATION
ORDER NO.

TOP VIEW

UNIT DATA
COOLING PERFORMANCE

4719/32"
[1209 mm]

TOTAL CAPACITY* ........................ _______ MBH
SENSIBLE CAPACITY* .................. _______ MBH
OUTDOOR DESIGN TEMP. _______ °F [°C] DB/WB
TOTAL SUPPLY AIR ................ _______ CFM [L/s]
TEMP. OF AIR ENTERING
EVAPORATOR COIL...... _______ °F [°C] DB/WB
POWER INPUT REQUIREMENT ...... _______ KW
SEER RATING........................................ _______

5013/16"
[1290 mm]

(*uses blower motor heat)

BOTTOM VIEW

HEATING PERFORMANCE
HEAT PUMP HEATING PERFORMANCE
CAPACITY @ 47°F .......................... ________MBH
CAPACITY @ 17°F .......................... ________MBH
COEFFICIENT OF PERFORMANCE
@ 47°F............................................ ________C.O.P.
@ 17°F............................................ ________C.O.P.
ELECTRIC HEAT CAPACITY ............ _______ KW
H.S.P.F. ...................................................... _______

451/16"
[1145 mm]
INSIDE
OUTDOOR FAN
GRILLE &
COMPRESSOR ACCESS

11/2"
[38 mm]
TYP.
BOTTOM
RETURN
DUCT
OPENING

SUPPLY AIR BLOWER PERFORMANCE
TOTAL SUPPLY AIR ................ _______ CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT...................................... _______ IWG
BLOWER SPEED .......................... _______ RPM
POWER OUTPUT REQUIREMENT .. _______ BHP
MOTOR RATING ........................ _______ HP [W]
POWER INPUT REQUIREMENT ...... _______ KW

313/16"
[97 mm]

Sloped Curb

POWER SUPPLY...................... ____________ Hz
TOTAL UNIT AMPACITY................ _______ AMPS
MINIMUM WIRE SIZE .................... _______ AWG
MAXIMUM OVERCURRENT DEVICE
FUSES HACR BREAKER ........ _______ AMPS

TOTAL UNIT WEIGHT
TOTAL OPERATING WEIGHT .... _______ LBS [kg]
(including field-installed accessories)

CLEARANCES
2" [50.8 mm]

SIDE “B” (WITHOUT ECONOMIZER)

12" [304.8 mm]

SIDE “C” (WITHOUT ECONOMIZER)

48" [1,219.2 mm]

SIDE “D” (WITHOUT ECONOMIZER)

24" [610 mm]

ABOVE UNIT (WITHOUT ECONOMIZER) 60" [1,524 mm]

497/16"
[1256 mm]
INSIDE

141/4"
[362 mm]
TYP. 9
19 /16"
[497 mm]

ELECTRICAL DATA

SIDE “A” (WITHOUT ECONOMIZER)

13/16"
[30 mm]
TYP.

[ ] Designates Metric Conversions

45/16"
[95 mm]

BOTTOM
SUPPLY
DUCT
OPENING
153/8"
[391 mm]

33/16"
[97 mm]

FIELD INSTALLED ACCESSORIES
Roof Curb (14" [355.6 mm & 24" [609.6 mm]
Sloped Platform) ..............................................
Filter Accessory......................................................
Lift Kit (For Rigging) ..............................................
Time Delay Relay ..................................................
Start Assist ..........................................................
Low Ambient Control ..............................................
Low Pressure Control ............................................

Economizer (Enthalpy Controlled) Downflow Only ....
Manual Fresh Air Damper ......................................
L.P. (Propane) Kit ..................................................
Transition (Rectangular-Round) Downflow/Sideflow ..
Concentric Diffuser and Grille ..................................
High Pressure Control ............................................
Thermostat ..........................................................

SIDE VIEW

SIDE VIEW

OUTDOOR
COIL PROTECTIVE
GRILLE

FILTER ACCESS PANEL (FOR UNIT
MOUNTED FILTER ACCESSORY

THERMOSTAT
WIRE ENTRANCE

11/8"
[29 mm]

255/16"
[643 mm]
103/16"
[259 mm]

51/16"
[129 mm]
ELECTRICAL
POWER ENTRANCE
43/4"
[121 mm]

527/16"
[1332 mm]

BLOWER/
EVAPORATOR
ACCESS PANEL

FRONT VIEW

REAR VIEW
CONTROL
ACCESS PANEL
47/8"
[124 mm]

SIDE SUPPLY
DUCT OPENING

LIQUID
PRESSURE
SERVICE PORT
75/16"
[186 mm]
2211/16"
[576 mm]

471/2"
[1207 mm]
THREADED PVC
CONDENSATED DRAIN
CONNECTION (3/4 N.P.T.)

SUCTION PRESSURE
SERVICE PORT

133/4"
[349 mm]

21/2" [63.5 mm]
47/16"
[113 mm]

57/16" [138 mm]
81/2"
[216 mm]
TYP.
15"
[381 mm]

143/16"
[360 mm]
TYP.

191/8"
[486 mm]

SIDE RETURN
DUCT OPENING

SHOWN WITH DUCT COVERS REMOVED.

Model Number

Height “A”

B024, B025

3515/16

B030, B036, B042, B048

41

Before proceeding with installation, refer
to installation instructions packaged
with each model, as well as complying
with all Federal, State, Provincial, and
Local codes, regulations, and practices.

Rheem Sales Company, Inc.
P.O. Box 17010, Fort Smith, AR 72917

“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A.

8-09 DC

FORM NO. X33-1234 REV. 1
Supersedes Form No. X33-1234



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9ca2ddfc-b386-11de-bea4-003065c4b500
Producer                        : Acrobat Distiller 4.0 for Macintosh
Create Date                     : 2009:10:07 15:55:50Z
Modify Date                     : 2009:10:07 16:16:00-05:00
Metadata Date                   : 2009:10:07 16:16:00-05:00
Document ID                     : uuid:33b7ecaa-b385-11de-bea4-003065c4b500
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools