Rheem Classic Series Up To 85 9 Afue Ecm And Psc Motors Submittal Sheet

: Rheem Rheem-Classic-Series-Up-To-85-9-Afue-Ecm-And-Psc-Motors-Submittal-Sheet-683965 rheem-classic-series-up-to-85-9-afue-ecm-and-psc-motors-submittal-sheet-683965 rheem pdf

Open the PDF directly: View PDF .
Page Count: 3

SUBMITTAL COVER SHEET

Quantity

Unit Designation

Model No.

Total Cooling

Sensible Cooling

Air Ent. Evaporator

Air Lvg. Evaporator

Heating Input

Heating Output

CFM/ESP

EER/SEER

Electrical

Minimum Ampacity

Min.-Max. Breaker

Net Unit Weight

Accessory

Catalog Form Number

ACCESSORIES: NOTES:

PROJECT NAME

LOCATION

ARCHITECT

ENGINEER

CONTRACTOR

SUBMITTED BY DATE

UNIT SUMMARY

Rely on Ruud. ™

FORM NO. M22-1640

Rely on Ruud.™

FORM NO. X33-1357 REV. 1

JOB NAME MODEL NO.

CONTRACTOR OUTDOOR UNIT MODEL NO.

ENGINEER LOCATION

SUBMITTED FOR APPROVAL RECORD ORDER NO.

DATE

SUBMITTAL SHEET FOR HIGHBOY & LOWBOY OIL

FURNACES WITH ECM/VARIABLE SPEED MOTORS

ROCA-***E: Highboy Series

ROLA-***E: Lowboy Series

Input Ratio from 84,000 to 175,000 BTU/HR [24.61 to 51.28 kW]

UNIT DATA

HEATING PERFORMANCE

TOTAL CAPACITY INPUT* ...... _______ MBH [kW]

TOTAL CAPACITY OUTPUT* .. _______ MBH [kW]

DESIGN TEMP. RISE .............. _______ °F [°C] DB

AFUE ................................................ _______ %

CALIFORNIA SEASONAL

EFFICIENCY .................................. _______ %

(*uses blower motor heat)

SUPPLY AIR BLOWER PERFORMANCE

TOTAL AIR SUPPLY ................ _______ CFM [L/s]

TOTAL RESISTANCE EXTERNAL

TO UNIT...................................... _______ IWG

BLOWER SPEED .......................... _______ RPM

POWER OUTPUT REQUIREMENT .. _______ BHP

MOTOR RATING ........................ _______ HP [W]

POWER INPUT REQUIREMENT........ _______ kW

ELECTRICAL DATA

POWER SUPPLY .............................. _______ Hz

TOTAL UNIT AMPACITY................ _______ AMPS

MINIMUM WIRE SIZE .................... _______ AWG

MAXIMUM OVERCURRENT DEVICE

FUSES/HACR BREAKER .......... _______ AMPS

FEATURES FOR ROCA/ROLA

The Rheem

Classic Series®

premium upflow oil furnace is for installa-

tion in proper ventilated utility rooms, closets or alcoves.

■ECM blower assemblies for heating and air conditioning applications

■ECM Control board located in furnace vestibule

■ECM controls set for 2-stage air conditioning, 2-stage heat pump

back up

■10-gauge primary and 14-gauge secondary heat exchanger

■Front cleanout ports extend through front wall for accessibility

■Efficiencies up to 85.9%

■Front or rear flue Lowboys available

■All furnaces have standard Honeywell controls

■Available with Beckett, Riello Carlin burners

■Extended vestibule on all units

Annual Fuel Utilization Efficiency -

AFUE

THIS MODEL

ENER UIDE

97%78%

HIGH

MID

82% 88%

80.0%

Before proceeding with installation, refer

to installation instructions packaged

with each model, as well as complying

with all Federal, State, Provincial, and

Local codes, regulations, and practices. Rheem Sales Company, Inc.

P.O. Box 17010, Fort Smith, AR 72917

“In keeping with its policy of continuous progress and product improvement, Manufacturer reserves the right to make changes without notice.”

PRINTED IN U.S.A. 2-13 QG FORM NO. X33-1357 REV. 1

Supersedes Form No. X33-1299

Lowboy

Model Lowboy*

ROLA-070E ROLA-115E

DIMENSIONS

Cabinet Width (B) 20-1/4" 25-1/8"

Highboy

ROCA-070E

22-1/4" 25-1/2"

ROCA-115E

Cabinet Depth (C) 47-1/2" 53-5/8" 33-1/8" 38"

Centerline - Flue to Floor (D) 31-1/4" 38-1/2" 49-1/8" 52-5/8"

Centerline - Flue to Side (E) 10-1/8" 12-1/2" 11-1/8" 12-3/4"

Warm Air Supply Depth (G) 17-1/2" 21-1/2" 19-3/4" 23-3/8"

Warm Air Supply Width (Ho) 18-1/4" 22-7/8" 20-1/2" 23-3/4"

Return Air Supply Width (Hr) 18-1/4" 22-7/8" 15" 15"

Return Air Supply Depth (J) 14" 13-5/8" 23-5/8" 23-5/8"

Shipping Weight 323 lbs. 362 lbs. 298 lbs. 347 lbs.

53-5/8"Cabinet Height (A) 40" 46" 56-1/2"

* Specify front or rear flue on Lowboy models

[ ] Designates Metric Conversions

DIMENSIONS

DIMENSIONS

Highboy