Rheem Professional Classic Plus Series Heavy Duty Power Direct Vent Specification Sheet

: Rheem Rheem-Professional-Classic-Plus-Series-Heavy-Duty-Power-Direct-Vent-Specification-Sheet-683453 rheem-professional-classic-plus-series-heavy-duty-power-direct-vent-specification-sheet-683453 rheem pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Residential Gas
INTEGRATED
HOME COMFORT Classic Plus Heavy Duty
Professional
Water
Power Direct Vent Water Heaters

Professional Classic Plus™ Heavy Duty Power
Direct Vent gas water heaters are a perfect choice
for tight construction and indoor air quality
Performance

Plus…

• Recovery Capacity: 72.8 gallons per
hour (delivers approximately 120
­gallons of hot water in the first hour)**

• Enhanced flow brass drain valve

Self-Diagnostic System

• Low lead compliant

• Electronic gas control for
improved monitoring and
service

• Durable silicon nitride igniter (HSI)

• Temperature and pressure relief valve
included

• Side taps for space heating

Low Emissions

• EverKleen™ patented system fights
sediment build-up

• Eco-friendly burner, low NOx design

• Standard replacement parts

Features

Warranty

• Two pipe system: one pipe pulls in
outside air for combustion and the
other exhausts combustion gases

• 8-Year limited tank and parts warranty*

• 120 VAC powered blower
• New whisper quiet blower

Flammable Vapor
Detection System
• Protective control system that
disables the heater in the presence of
flammable vapor accumulation

Flexible Venting Options
• Long venting lengths up to 100 feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
• Concentric vent kit available

• With ProtectionPlus™ the 8-year limited
tank warranty becomes 12-year
*See Residential Warranty Certificate for ­
complete information

Efficiency | All models tested a­ ccording to ANSI test
­procedures, and meet or exceed the thermal efficiency
and standby loss ­requirements of current ASHRAE
standard (EPact). Also exceeds energy efficiency
codes of all states including ­California Energy Commission (CEC).
Safety and Construction | Design certified by CSA:
For ­operation at 160 degrees; meets all safety and
­construction requirements of ANSI Z21.10.3; as an
automatic ­storage or instantaneous water heater; as
an automatic circulating tank water heater; and for
operation on combustible floors and in alcove installations. All models are North Carolina Code c­ ompliant.
­Certified for 150 PSI maximum working pressure.

Longer Life

Professional Classic Plus
Heavy Duty
Power Direct Vent
75-Gallon Capacities
75,100 Btu/h
Natural and LP Gas

• Premium grade anode rod provides
long-lasting tank protection
LEED Point = 1

See specifications chart on back.

IINNTTEEGGRAT
ED
MO
FO
RAT
E DH OHM
OEMCEOC
MRT
F O RT
PRINTED IN U.S.A. 03/15 WP FORM NO. PRO+G RHPDVHD

Residential Gas
INTEGRATED
HOME COMFORT Classic Plus Heavy Duty
Professional
Water
Power Direct Vent Water Heaters

Professional Classic Plus™ Heavy Duty Power Direct Vent Specifications
	

	

DESCRIPTION	

FEATURES	

ROUGHING IN DIMENSIONS (SHOWN IN INCHES)

	 T					
GAS INPUT IN	
RECOVERY IN	
	Y			
THOUS. BTU/H	 G.P.H. 100° RISE**	
	 P	 GAL.	MODEL	
	 E	 CAP.	 NUMBER	
NAT.	
LP	
NAT.	
LP	

	 Tall	

75	 PRO+G75-76N RH PDV	

	 Tall	

75	 PRO+G75-76P RH PDV	

HT. TO	
TOP OF	
VENT	
A	

HT. TO			
TOP OF	
TANK		
AIR INLET	
HT.	
DIAM.	
B	
C	
D	

HT. TO	
GAS 	
CONN.	
E	

WATER	
CONN.	
CNTR.	
F	

HT. TO	
SIDE T&P	
VALVE	
G	

WATER	
FRONT		
CONN.	
TO	
SHIP.
size	BACK	 WT.
H	
I	
(LBS)

–	72.8	–	 70-3/8	71-1/4	60-1/2	26-1/4	 15	

11	

53	

1	 36-3/4	 325

–	75.1	 –	
72.8	70-3/8	71-1/4	60-1/2	26-1/4	 15	

11	

53	

1	 36-3/4	 325

75.1	

**Recovery Capacity is based upon a 100° F water temperature rise and calculated per ANSI Z21.10.3 standards. First hour hot water delivery is based upon 77° water temperature rise.

T&P FITTING
3/4" N.P.T.

SIDE TAPS

D
BA C

1/2"

G

COMBUSTION
AIR INLET
COMBUSTION
EXHAUST
(VENT)

I

H

HOT
WATER
CONNECTION

H

E

COLD
WATER
CONNECTION

F

Vent and Combustion Air Inlet System Information
From Sea Level Through 2,000 ft. Above Sea Level
		
	Model	

Vent & Combustion Air-Inlet	Min. Allowed Equiv. Vent & Combustion	Max. Allowed Equiv. Vent & Combustion	
Vent and Combustion
System Diameter (Inches)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	 Air-Inlet System Termination(s)

	 PRO+G75-76N RH PDV	

3	

8	

50	

90° Elbows	

–

	PRO+G75-76N RH PDV	

3	

8	

40	

–	

Concentric*

	 PRO+G75-76N RH PDV	

4	

8	

100	

90° Elbows	­–

From 2,001 ft. Above Sea Level Through 5,999 ft. Above Sea Level
		
	Model	

Vent & Combustion Air-Inlet	Min. Allowed Equiv. Vent & Combustion	Max. Allowed Equiv. Vent & Combustion	
Vent and Combustion
System Diameter (Inches)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	 Air-Inlet System Termination(s)

	PRO+G75-76N RH PDV	

3	

8	

25	

90° Elbows	

–

	PRO+G75-76N RH PDV	

3	

8	

20	

–	

Concentric*

	PRO+G75-76N RH PDV	

4	

8	

100	

90° Elbows	­–

From 6,000 ft. Above Sea Level Through 7,700 ft. Above Sea Level
		
	Model	

Vent & Combustion Air-Inlet	Min. Allowed Equiv. Vent & Combustion	Max. Allowed Equiv. Vent & Combustion	
Vent and Combustion
System Diameter (Inches)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	
Air-Inlet Lengths – Each Pipe Run (Ft.)	 Air-Inlet System Termination(s)

	 PRO+G75-76N RH PDV	

4	

8	

50	

90° Elbows	

–

One 90° elbow is approximately equivalent to 5 feet of pipe. One 45° elbow is approximately equivalent to 2.5 feet of pipe.
* Use only Rheem 3 inch concentric termination.

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Water Heating • 101 Bell Road
Montgomery, Alabama 36117-4305 • www.rheem.com
IINNTTEEGGRAT
ED
MO
FO
RAT
E DH OHM
OEMCEOC
MRT
F O RT

2
PRINTED IN U.S.A. 03/15 WP FORM NO. PRO+G RHPDVHD



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2015:03:02 13:31:46-06:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2015:03:05 14:24:10-06:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:03:05 14:24:10-06:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:7a9dd482-662b-b146-8952-a28719a05b29
Original Document ID            : xmp.did:0A80117407206811B34BA559CEB6FCA7
Document ID                     : xmp.id:F04F4A2EDA236811822AD019CA7A7AD8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:099AAE8716206811822A96ECF5959976
Derived From Document ID        : xmp.did:02A95166D23268118083929DE914427B
Derived From Original Document ID: xmp.did:0A80117407206811B34BA559CEB6FCA7
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:03:02 13:31:46-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools