Rheem Professional Classic Series Direct Vent For Manufactured Housing Specification Sheet

: Rheem Rheem-Professional-Classic-Series-Direct-Vent-For-Manufactured-Housing-Specification-Sheet-683502 rheem-professional-classic-series-direct-vent-for-manufactured-housing-specification-sheet-683502 rheem pdf

Open the PDF directly: View PDF .
Page Count: 2

Efficiency

• .62 - .63 EF

Performance

• FHR: 64 gallons for 40-gallon model

and 49 gallons for 30-gallon model

• Recovery: 30.3 GPH

at a 90° F rise

Flexibility

• Field convertible controls for natural

gas or LP operation included

• No external door is required

• Provides maximum design freedom

since it can be placed anywhere within

the home

• Hot water outlet located at top

• Cold water inlet at side for fast,

economical hook-up

Professional

Classic

™ Direct Vent gas water heaters

from Rheem are certified for Manufactured

Housing (HUD) and modular construction

Longer Life

• Premium grade anode rod provides

long-lasting tank protection

Plus…

• Piezo ignition – easy light pilot

• Enhanced ow brass drain valve

• Factory installed temperature and

pressure relief valve – side location

• Low lead compliant

• EverKleen

™

patented system ghts

sediment build-up

Warranty

• 6-Year limited tank and parts

warranty*

* See Residential Warranty Certicate for

complete information

Units meet or exceed ANSI requirements and have

been tested according to D.O.E. procedures. Units

meet or exceed the energy efciency requirements

of NAECA, ASHRAE standard 90, ICC Code and

all state energy efciency performance criteria.

Roof Jacks

12" Non-Adjustable & Air Inlet AP12032E

15-32" Adjustable & Air Inlet AP12032B

30-60" Adjustable & Air Inlet AP12032C

48-95" Adjustable & Air Inlet AP12032D

Air Inlets

6" Non-Adjustable AP12019B

11-22" Adustable AP12017B

Extension Pipe Kit

Roof Jack Extension Pipe Kit AP12021

Roof jack and air inlet must be ordered separately

with 30 and 40-gallon direct vent models and

must be in accordance with instructions furnished

with the heater. No other roof jack or air inlet

assemblies are approved for installation with this

heater. Clamps and secure strapping are packed

in water heater carton.

Adjustable Roof

Jack Vent

Design allows adjustment

to roof pitches of up to

5/12". Four roof

jacks available to

accommodate roof

thickness of 12" up to 95".

Direct Combustion

Air Inlet

Air is drawn directly into

combustion chamber

through air inlet xed

to base; 1/2" screen for

rodent protection.

Professional

Classic

Direct Vent for

Manufactured Housing

30 and 40-Gallon Capacities

Up to 30,000 Btu/h

Natural and LP Gas

Water

INTEGRATED HOME COMFORT

Residential Gas

Professional

Classic

Direct Vent

Water Heaters for Manufactured Housing

PRINTED IN U.S.A. 02/15 WP FORM NO. PROG RHMHDV N

INTEGRATED HOME COMFOR

T

INTEGRATED HOME COMFORT

See dimensions chart on back.

PRINTED IN U.S.A. 02/15 WP FORM NO. PROG RHMHDV N

2

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Rheem Water Heating • 101 Bell Road

Montgomery, Alabama 36117-4305 • www.rheem.com

INTEGRATED HOME COMFOR

T

INTEGRATED HOME COMFORT

Professional

Classic

™ Direct Vent for Manufactured Housing Specifications

Energy Factor based on D.O.E. (Department of Energy) test procedures.

Water

INTEGRATED HOME COMFORT

Residential Gas

Professional

Classic

Direct Vent

Water Heaters for Manufactured Housing

G

2"

1/2"

RELIEF

VALVE

COLD

WATER

CONN.

ADJUSTS TO PITCHES

OF UP TO 5/12"

WATER CONNECTIONS

ALL 3/4" N.P.T.

H

D

E

C

F

A

B

24" MIN.

0" MIN.

WALL

CLEARANCE

DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.

T HT. TO ROOF HT. TO WATER

Y GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK GAS VENT JACK SIDE T&P CONN. SHIP. ENERGY

P GAL. MODEL THOUS. BTU/H G.P.H. 90° RISE DEL. G.P.H. VENT HT. DIAM. CONN. SIZE VENT SIZE VALVE SIZE WT. FACTOR

E CAP. NUMBER NAT./LP NAT./LP NAT./LP A B C D E F G H (LBS) NAT./LP

Tall 30 PROG30-30N RH63 MH DV 30 30.3 49 56-5/8 56-5/8 17-3/4 14-1/8 3 5 51-1/8 20 110 0.63

Tall 40 PROG40-30N RH62 MH DV 30 30.3 64 57-3/8 57-3/8 19-3/4 14-1/8 3 5 51-1/8 20 125 0.62