Rheem Standard Efficiency X 13 Motor Rh1T Rh2T Specification Sheet
Rheem-Standard-Efficiency-X-13-Motor-Motor-Rh1T-Rh2T-Specification-Sheet-683946 rheem-standard-efficiency-x-13-motor-motor-rh1t-rh2t-specification-sheet-683946
2015-04-02
: Rheem Rheem-Standard-Efficiency-X-13-Motor-Motor-Rh1T-Rh2T-Specification-Sheet-683948 rheem-standard-efficiency-x-13-motor-motor-rh1t-rh2t-specification-sheet-683948 rheem pdf
Open the PDF directly: View PDF 
.
Page Count: 28
| Download | |
| Open PDF In Browser | View PDF |
Air Air Handlers RH1T/RH2T Series Rheem High Efficiency Air Handler RH1T/RH2T- Series Constant Torque Motor (ECM) Efficiencies up to 16 SEER • RH1T/RH2T feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most Rheem outdoor units. • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. • Factory-installed indoor coil. • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect. • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep. • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure. • Enhanced airflow up to .7" external static pressure. • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing. FORM NO. H11-553 REV. 1 Air Table of Contents RH1T/RH2T Series TABLE OF CONTENTS Engineering Features ......................................................................................3 Model Number Identification ............................................................................4 Dimensional Data ........................................................................................5-6 Airflow Directional Data ..................................................................................7 Airflow Performance Data RH1T ..................................................................8-12 Electrical Data RH1T ................................................................................13-16 Airflow Performance Data RH2T ................................................................17-20 Electrical Data RH2T ................................................................................21-22 Electrical Wiring ............................................................................................23 Accessories ............................................................................................................23 Limited Warranty ..........................................................................................24 2 Air Engineering Features RH1T/RH2T Series Engineering Features RH1T/RH2T- Series • The most compact unit design available, all standard heat air handler models only 421/2 to 551/2 inches [1079 to 1409 mm] high. • Attractive pre-painted cabinet exterior. • Rugged wall steel cabinet construction, designed for added strength and versatility. • 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. • Four leg blower motor mount. • Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. • Traditional open wire element design for heat applications. • Field convertible for vertical downflow, horizontal left hand or right hand air supply. • 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. • Indoor coil design provides low air side pressure drop, high performance and extremely compact size. • Expansion valve on indoor coil provides for operation with air conditioning. • Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. • Coils are tested at the factory with an extensive refrigerant leak check. • Coils have copper sweat refrigerant connections. • Coils utilize chatleff metering device connections. • Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. • Supply duct flanges provided as standard on air handler cabinet. • Provisions for field electrical, connections available from either side or top of the air handler cabinet. • Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. • Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2 inches [51 mm] for 11/2 inch [38 mm] conduit. • Front refrigerant and drain connections. [ ] Designates Metric Conversions 3 R Air Model Number Identification RH1T/RH2T Series H 1 T 24 17 S T A N A A *** Option Code (see ADS-3803) Blank = None Minor Series A = First Voltage A = 115/1/60 D = 480V/3/60 J = 208/240/1/60 Controls C = Communicating N = Non-Communicating Major Series A = First Metering Device T = TEV E = EEV P = Piston Coil Efficiency S = Standard M = Medium H = High Width 17 = 17.5" [431.8 mm] (600-1200 CFM) 21 = 21" [533.4 mm] (800-1600 CFM) 24 = 24.5" [609.6 mm] (1400-1800 CFM) Nominal Capacity 24 = 18,000 [5.27 kW]-24,000 [7.03 kW] BTU/H 36 = 30,000 [8.79 kW]-36,000 [10.55 kW] BTU/H 48 = 42,000 [12.31 kW]-48,000 [14.06 kW] BTU/H 60 = 60,000 [17.58 kW] BTU/H Motor Type T = Constant Torque (ECM) Stages of Air Flow 1 = Single 2 = Two Stage Product Category H = Air Handler Rheem [ ] Designates Metric Conversions Available Models at 115V A Voltage RH1T2417STANAA RH1T3617STANAA RH1T3621MTANAA RH1T4821STANAA RH1T4824STANAA RH1T6024STANAA Available Models at 218V J Voltage RH1T2417STANJA RH1T3617STANJA RH1T3621MTANJA RH1T4821STANJA RH1T4824STANJA RH1T6024STANJA RH2T2421MTANJA RH2T3621MTANJA RH2T4824MTANJA RH2T6024STANJA Available Models at D Voltage RH1T6024STANDA 4 Dimensional Data RH1T/RH2T Series Air Unit Dimensions ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE HIGH VOLTAGE CONNECTION 7/8 [22.2 mm], 13/32 [27.8 mm], 131/32 [50 mm] DIA. KNOCKOUTS. SUPPLY AIR NOTE: 24 CLEARANCE REQUIRED IN FRONT OF UNIT FOR FILTER AND COIL MAINTENANCE. 105/16 [262 mm] W A LOW VOLTAGE CONNECTION 5/8 [15.9 mm] AND 7/8 [22.2 mm] KNOCKOUT Return Air Opening Dimensions Model Cabinet Size Return Air Opening Width (Inches) Return Air Opening Depth/Length (Inches) 17 21 24 157/8 193/8 227/8 193/4 193/4 193/4 H AUXILIARY DRAIN CONNECTION 3/4 [19.1 mm] FEMALE PIPE THREAD (NPT) HORIZONTAL APPLICATION ONLY PRIMARY DRAIN CONNECTION 3/4 [19.1 mm] FEMALE PIPE THREAD (NPT) AUXILIARY DRAIN CONNECTION 3/4 [19.1 mm] FEMALE PIPE THREAD (NPT) UPFLOW/DOWNFLOW APPLICATION ONLY 191/2 [495 mm] RETURN AIR OPENING 2111/16 [551 mm] LIQUID LINE CONNECTION COPPER (SWEAT) VAPOR LINE CONNECTION COPPER (SWEAT) UPFLOW UNIT SHOWN: UNIT MAY BE INSTALLED UPFLOW, DOWNFLOW, HORIZONTAL RIGHT OR LEFT AIR SUPPLY. 515/16 [151 mm] HORIZONTAL ADAPTER KIT 41/8 1 [105 mm] 3 /16 [76 mm] 13/16 [48 mm] 11/8 [29 mm] 11/16 [27 mm] 13/8 [35 mm] 213/16 [71 mm] VAPOR LINE CONNECTION 51/4 [133 mm] 53/8 [136 mm] AUXILIARY HORIZONTAL DRAIN CONNECTION UPFLOW UNIT SHOWN: UNIT MAY BE INSTALLED UPFLOW, DOWNFLOW, HORIZONTAL RIGHT OR LEFT AIR SUPPLY. PRIMARY DRAIN CONNECTION LIQUID LINE CONNECTION VERTICAL DRAIN PAN [ ] Designates Metric Conversions ( ) Designates Unit with Double Coil Cabinet AUXILIARY UPFLOW/DOWNFLOW DRAIN CONNECTION 5 Air Dimensional Data RH1T/RH2T Series Unit Dimensions & Weights Model Size RH1T Refrigerant Connections Sweat (In.) [mm] ID Liquid Unit Dimensions & Weights Vapor Unit Width “W” In. [mm] Unit Height “H” In. [mm] Supply Duct “A” In. [mm] Flow Unit Weight/Shipping Weight [ ] Air Designates Metric Conversions CFM (Nom.) [L/s] (Lbs.) [kg] ( ) Designates Unit with Double Coil Cabinet Unit With Lo Hi Coil (Max. KW) 2417ST 3/8 [9.53] 3/4 [19.05] 171/2 [445] 421/2 [1080] 161/2 [406] 600 [283] 800 [378] 3617ST 3/8 [9.53] 3/4 [19.05] 171/2 421/2 [1080] 161/2 [406] 1000 [472] 1200 [566] 96/110 [44/50] 3621MT 3/8 [9.53] 7/8 [22.23] 211/2 [533] 501/2 [1282] 191/2 [495] 1000 [472] 1200 [566] 126/142 [57/64] 4821ST 3/8 [9.53] 7/8 [22.23] 211/2 [533] 501/2 [1282] 191/2 [495] 1400 [661] 1600 [755] 128/144 [56/65] 4824ST 3/8 [9.53] 7/8 [22.23] 241/2 [622] 501/2 [1282] 231/2 [584] 1600 [755] — 142/160 [64/72] 6024ST 3/8 [9.53] 7/8 [22.23] 241/2 [622] 551/2 [1410] 231/2 [584] — 1800 [850] 159/176 [72/80] Unit Width “W” In. [mm] Unit Height “H” In. [mm] Supply Duct “A” In. [mm] Lo [445] 92/105 [42/48] *Maximum dehumidification airflow. Unit Dimensions & Weights Model Size RH2T Refrigerant Connections Sweat (In.) [mm] ID Liquid Vapor Air Flow CFM (Nom.) [L/s] Unit Weight/Shipping Weight (Lbs.) [kg] Hi Unit With Coil (Max. KW) 2421MT 3/8 [9.53] 3/4 [19.05] 211/2 [533] 421/2 [1080] 191/2 [495] 525 [248] 700 [330] 111/126 [50/57] 3621MT 3/8 [9.53] 7/8 [22.23] 211/2 501/2 [1282] 191/2 [495] 800 [377] 1050 [495] 129/145 [59/66] 4824MT 3/8 [9.53] 7/8 [22.23] 241/2 [622] 551/2 [1410] 231/2 [584] 1050 [495] 1400 [660] 128/146 [58/66] 6024ST 3/8 [9.53] 7/8 [22.23] 241/2 [622] 551/2 [1410] 231/2 [584] 1200 [566] 1600 [755] 161/178 [73/81] [ ] Designates Metric Conversions 6 [533] Air Airflow Directional Data RH1T/RH2T Series Airflow Directional Data UPFLOW HORIZONTAL LEFT HAND AIRFLOW DOWNFLOW HORIZONTAL RIGHT HAND AIRFLOW 7 Air Airflow Performance Data RH1T/RH2T Series Airflow Performance below for both cooling and electric heat operation. For optimum blower performance, operate the unit in the .3 [8 mm] to .7 inches [18 mm] W.C. external static range. Units with coils should be applied with a minimum of .1 inch [3 mm] W.C. external static range. Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size, voltage and number of electric heaters to be used. Make sure external static applied to unit allows operation within the minimum and maximum limits shown in table Airflow Operating Limits Model Cabinet Width Cooling BTUH x 1,000 Cooling Tons Nominal 17 17/21 21 24 -18 1.5 -24 2 -30 2.5 -36 3 -42 3.5 -48 4 -48 4 -60 5 Heat Pump or Air Conditioning Maximum Heat/Cool CFM [L/s] (37.5 CFM [18 L/s]/1,000 BTUH) (450 CFM [212 L/s]/Ton Nominal) 675 [319] 900 [425] 1125 [531] 1350 [637] 1575 [743] 1800 [850] 1800 [850] 1930 [911] Heat Pump or Air Conditioning Nominal Heat/Cool CFM [L/s] (33.3 CFM [16 L/s]/1,000 BTUH) (400 CFM [189 L/s]/Ton Nominal) 600 [283] 800 [378] 1000 [472] 1200 [566] 1400 [661] 1600 [755] 1600 [755] 1800 [850] Heat Pump or Air Conditioning Minimum Heat/Cool CFM [L/s] (30.0 CFM [14 L/s]/1,200 BTUH) (360 CFM [170 L/s]/Ton Nominal) 540 [255] 720 [340] 900 [425] 1080 [510] 1260 [595] 1440 [680] 1440 [680] 1620 [765] Maximum kW Electric Heating & Minimum Electric Heat CFM [L/s] 13 487 [230] 13 617 [291] 18 814 [384] 18 1054 [497] 20 1171 [553] 25 1502 [709] 25 1502 [709] 30 1666 [786] Maximum Electric Heat Rise °F [°C] 80 [26.7] 63 [17.2] 66 [18.9] 51 [10.6] 49 [9.4] 50 [10] 50 [10] 54 [12.2] [ ] Designates Metric Conversions 8 Air Airflow Performance Data RH1T/RH2T Series 115V/208V/240V/460V Airflow Performance Data—RH1T (Constant Torque (ECM) Motor) Model No. RH1T Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 2 2417ST No Heat 1.5 Ton 5 683/485 [322/229 L/s] 10x8 1/3 HP [249] 5 Speed 3 2 2417ST with 13 kW Heater 1.5 Ton 5 683/485 [322/229 L/s] 10x8 1/3 HP [249] 5 Speed 3 4 2417ST No Heat 2 Ton 5 858/697 [405/329 L/s] 10x8 1/3 HP [249] 5 Speed 5 4 2417ST with 13 kW Heater 2 Ton 5 683/485 [322/229 L/s] 10x8 1/3 HP [249] 5 Speed 5 X-13 CFM [L/s] Air Delivery/RPM/Watts—115/208/240 Volts External Static Pressure—Inches W.C. [kPa] 0.1 [.02] 0.2 [.05] 0.3 [.07] 0.4 [.10] 0.5 [.12] 0.6 [.15] 0.7 [.17] CFM 837 [395] 713 [366] 608 [287] 554 [261] 485 [229] — — RPM 565 587 630 692 751 — — Watts 95 81 88 74 66 — — CFM — — — — 683 [322] 615 [290] 572 [270] RPM — — — — 789 842 892 Watts — — — — 140 159 155 CFM 814 [384] 692 [326] 589 [278] 535 [252] 467 [220] — — RPM 592 613 656 719 778 — — Watts 108 90 97 82 73 — — CFM — — — — 808 [381] 629 [297] 584 [276] RPM — — — — 789 842 892 Watts — — — — 148 168 163 CFM 902 [426] 846 [399] 788 [372] 742 [350] 679 [320] — — RPM 596 645 694 741 791 — — Watts 105 108 116 121 130 — — CFM — — — — 858 [276] 816 [385] 770 [363] RPM — — — — 834 879 925 Watts — — — — 185 182 214 CFM 882 [416] 827 [390] 769 [363] 723 [341] 661 [312] — — RPM 595 670 719 767 817 — — Watts 113 125 124 129 197 — — CFM — — — — 833 [393] 791 [373] 746 [352] RPM — — — — 852 898 Watts — — — — 192 189 222 935 [441] — — CFM 1093 [516] 1050 [496] 1017 [480] 977 [461] 2 3617ST No Heater 2.5 Ton 5 935/1084 CFM [441/512 L/s] 10x8 1/2 HP [373] 5 Speed 3 RPM 671 725 764 809 852 — — Watts 153 168 174 180 188 — — CFM — — — — RPM — — — — 896 936 971 Watts — — — — 249 257 261 952 [449] 910 [429] — — CFM 1068 [504] 1025 [484] 992 [468] 2 3617ST with 18 kW Heater 2.5 Ton 5 910/1059 CFM [429/500 L/s] 10x8 1/2 HP [373] 5 Speed 3 4 3617ST No Heater 3 Ton 5 1130/1275 CFM [533/602 L/s] 10x8 1/2 HP [373] 5 Speed 5 4 3617ST with 18 kW Heater 3 Ton 5 1105/1250 CFM [521/590 L/s] 10x8 1/2 HP [373] 5 Speed 5 1084 [512] 1040 [491] 1001 [472] RPM 711 765 804 849 892 — — Watts 164 179 185 191 199 — — CFM — — — — RPM — — — — 936 976 1011 Watts — — — — 260 268 272 CFM 1270 [599] 1237 [584] 1199 [566] 1165 [550] 1130 [533] — — RPM 775 816 846 882 926 — — Watts 237 249 259 268 277 — — CFM — — — — RPM — — — — 963 999 1029 Watts — — — — 338 348 363 CFM 1245 [588] 1212 [572] 1174 [554] 1140 [538] 1105 [521] — — RPM 815 856 886 922 966 — — Watts 248 260 270 279 288 — — CFM — — — — RPM — — — — 1003 1039 1069 Watts — — — — 349 359 374 1059 [500] 1015 [479] 976 [461] 1275 [602] 1244 [587] 1211 [571] 1250 [590] 1219 [575] 1186 [560] [ ] Designates Metric Conversions 9 Air Airflow Performance Data RH1T/RH2T Series 115V/208V/240V/460V Airflow Performance Data—RH1T (Constant Torque (ECM) Motor) (con’t.) Model No. RH1T Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 2 3621MT No Heater 2.5 Ton 4 854/1103 CFM [403/521 L/s] 10x10 3/4 HP [559] 5 Speed 3 PSC CFM [L/s] Air Delivery/RPM/Watts—115/208/240 Volts External Static Pressure—Inches W.C. [kPa] 0.1 [.02] 0.2 [.05] 0.3 [.07] 0.4 [.10] 0.5 [.12] 0.6 [.15] 0.7 [.17] CFM 1073 [506] 1016 [479] 963 [454] 906 [428] 854 [403] — — — RPM 637 692 746 801 847 — Watts 130 142 153 165 176 — — CFM — — — — 1103 1059 1000 RPM — — — — 917 957 1001 Watts — — — — 262 271 285 936 [442] 880 [415] 828 [391] — — — CFM 1044 [493] 988 [466] 2 3621MT with 18 kW Heater 2.5 Ton 4 828/1016 CFM [391/479 L/s] 10x10 3/4 HP [559] 5 Speed 3 4 3621MT No Heater 3 Ton 4 1070/1288 CFM [505/608 L/s] 10x10 3/4 HP [559] 5 Speed 5 4 3621MT with 18 kW Heater 3 Ton 4 1042/1257 CFM [492/593 L/s] 10x10 3/4 HP [559] 5 Speed 5 RPM 678 734 791 844 883 — Watts 141 155 158 171 182 — — CFM — — — — 1016 961 904 RPM — — — — 939 968 1015 Watts — — — — 233 243 265 CFM 1264 [597] 1223 [577] 1171 [553] 1112 [525] 1070 [505] — — RPM 724 761 814 868 900 — — Watts 198 208 222 237 245 — — CFM — — — — 1288 1244 1200 RPM — — — — 974 1012 1044 Watts — — — — 345 362 371 CFM 1233 [582] 1193 [563] 1142 [539] 1084 [512] 1042 [492] — — RPM 759 794 845 915 933 — — Watts 219 215 227 251 261 CFM — — — — 1257 1213 1169 RPM — — — — 1020 1023 1054 Watts — — — — 355 368 376 Notes: Constant Torque motor speed changes. All Constant Torque motors have 5 speed tabs. Speed tab 1 is for continuous fan. Speed tab 2 (low static) and Speed tab 3 (high static) are for lower tonnage. Speed tab 4 (low static) and Speed tab 5 (high static) are for higher tonnage. Constant Torque air handlers are always shipped from factory at Speed tab 5, except for -4824, which is set at Speed tab 3. For instance, (-)H1T-HM2417JA is always shipped at high static 2-ton airflow (Speed tab 5). To change to 1.5-ton airflow, move the blue wire to Speed tab 2 or 3 on the Constant Torque motor. The low static Speed tab 2 (lower tonnage) and 4 (higher tonnage) are used for external static below 0.5" WC. The high static Speed tab 3 (lower tonnage) and 5 (higher tonnage) are used for external static exceeding 0.5" WC. Move the blue wire to the appropriate Speed tab as required by the application needs. • The airflow for continuous fan (Speed tab 1) is always set at 50% of the Speed tab 4. • The above airflow table lists the airflow information for air handlers without heater and air handler with maximum heater allowed for each model. • The following formula can be used to calculate the approximate airflow, if a smaller (N kW) than the maximum heater kit is installed. Approximate Airflow = Airflow without heater – (Airflow without heater – Airflow with maximum heater) x (N kW/maximum heater kW) [ ] Designates Metric Conversions 10 Air Airflow Performance Data RH1T/RH2T Series 115V/208V/240V/460V Airflow Performance Data—RH1T (Constant Torque (ECM) Motor) (con’t.) Model No. RH1T Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 2 4821ST No Heater 3.5 Ton 5 1337/1447 CFM [631/683 L/s] 10x10 3/4 HP [559] 5 Speed 3 2 4821ST with 20 kW Heater 3.5 Ton 5 1297/1333 CFM [612/629 L/s] 10x10 3/4 HP [559] 5 Speed 3 4 4821ST No Heater 4 Ton 5 1535/1654 CFM [724/781 L/s] 10x10 3/4 HP [559] 5 Speed 5 4 4821ST with 25 kW Heater 4 Ton 5 1495/1614 CFM [706/762 L/s] 10x10 3/4 HP [559] 2 Speed 5 2 4824ST No Heater 4 Ton 3 1545/1732 CFM [729/817 L/s] 11x11 3/4 HP [559] 5 Speed 3 2 4824ST with 25 kW Heater 4 Ton 3 1505/1692 CFM [710/798 L/s] 11x11 3/4 HP [559] 5 Speed 3 2 6024ST No Heater 5 Ton 4, 5 1517/1699 CFM [715/800 L/s] 11x11 3/4 HP [559] 5 Speed 3 2 6024ST with 30 kW Heater 5 Ton 4, 5 1477/1655 CFM [687/785 L/s] 11x11 3/4 HP [559] 5 Speed 3 PSC CFM [L/s] Air Delivery/RPM/Watts—115/208/240 Volts External Static Pressure—Inches W.C. [kPa] 0.1 [.02] 0.2 [.05] 0.6 [.15] 0.7 [.17] CFM 1473 [695] 1442 [681] 1401 [661] 1373 [648] 1337 [631] 0.3 [.07] 0.4 [.10] 0.5 [.12] — — RPM 781 825 867 905 949 — — Watts 257 271 303 307 315 — — CFM — — — — RPM — — — — 987 1034 1065 Watts — — — — 394 406 405 CFM 1433 [676] 1402 [662] 1361 [642] 1333 [629] 1297 [612] — — RPM 831 875 919 954 989 — — Watts 277 295 313 319 325 — — CFM — — — — RPM — — — — 1011 1046 1080 Watts — — — — 350 364 377 CFM 1665 [786] 1631 [770] 1601 [756] 1572 [742] 1535 [724] — — RPM 853 893 934 968 1015 — — Watts 351 387 401 406 422 — — CFM — — — — RPM — — — — 1036 1078 1095 Watts — — — — 500 513 523 CFM 1625 [767] 1591 [751] 1561 [737] 1532 [723] 1495 [706] — — RPM 894 932 970 1020 1052 — — Watts 389 400 410 430 450 — — CFM — — — — RPM — — — — 1085 1090 1105 Watts — — — — 514 520 530 CFM 1748 [825] 1669 [788] 1639 [773] 1599 [755] 1545 [729] — — RPM 660 698 734 762 795 — — Watts 297 311 326 340 353 — — CFM — — — — RPM — — — — 840 872 899 Watts — — — — 448 467 480 CFM 1708 [806] 1629 [769] 1599 [755] 1559 [736] 1505 [710] — — RPM 680 736 760 790 820 — — Watts 305 330 341 350 361 — — CFM — — — — RPM — — — — 865 890 1014 Watts — — — — 460 470 481 CFM 1705 [800] 1661 [703] 1632 [770] 1572 [741] 1517 [915] — — RPM 663 701 741 782 819 — — Watts 292 309 321 343 357 — — CFM — — — — RPM — — — — 857 895 920 Watts — — — — 447 466 473 CFM 1665 [995] 1621 [965] 1592 [751] 1532 [723] 1477 [697] — — RPM 701 739 779 820 857 — — Watts 313 330 342 364 378 — — CFM — — — — RPM — — — — 895 933 958 Watts — — — — 968 487 494 1447 [683] 1433 [676] 1402 [662] 1333 [629] 1300 [613] 1267 [598] 1654 [781] 1624 [766] 1563 [738] 1614 [762] 1584 [748] 1523 [719] 1732 [817] 1683 [794] 1630 [769] 1692 [798] 1643 [775] 1590 [750] 1699 [500] 1646 [776] 1601 [725] 1657 [787] 1606 [759] 1561 [735] [ ] Designates Metric Conversions 11 Air Airflow Performance Data RH1T/RH2T Series 115V/208V/240V/460V Airflow Performance Data—RH1T (Constant Torque (ECM) Motor) (con’t.) Model No. RH1T Tonnage Application Motor Speed From Factory Manufacturer Blower Size/ Recommended Motor Motor Air-Flow Range HP [W] Speed (Min/Max) CFM # of Speed 4 6024ST No Heater 5 Ton 5 1739/1905 CFM [821/899 L/s] 11x11 3/4 HP [559] 5 Speed 5 4 6024ST with 30 kW Heater 5 Ton 5 1699/1865 CFM [802/880 L/s] 11x11 3/4 HP [559] 5 Speed 5 X-13 CFM [L/s] Air Delivery/RPM/Watts—115/208/240 Volts External Static Pressure—Inches W.C. [kPa] 0.1 [.02] 0.2 [.05] 0.6 [.15] 0.7 [.17] CFM 1902 [898] 1862 [879] 1809 [854] 1781 [840] 1739 [821] 0.3 [.07] 0.4 [.10] 0.5 [.12] — — RPM 712 749 787 815 856 — — Watts 389 409 419 432 459 — — CFM — — — — RPM — — — — 894 924 950 Watts — — — — 565 570 592 CFM 1862 [879] 1822 [860] 1769 [835] 1741 [822] 1699 [802] — — RPM 750 790 810 850 880 — — Watts 410 420 430 455 479 — — CFM — — — — RPM — — — — 920 945 970 Watts — — — — 565 587 610 1905 [899] 1866 [881] 1832 [865] 1865 [880] 1826 [862] 1792 [846] Notes: • All 208/240V PSC motors have voltage taps for 208 and 240 volts. • All 208/240V PSC motors are shipped on high speed and 240 volts. • If the application external static is less than 0.5" WC, adjust the motor speed to the low static speed as described below: • Unplug the black motor wire off the relay on the control board and plug in the red motor wire. • Replace the cap on the black motor wire. • Voltage change (208/240V motors): • Move the orange lead to transformer 208V tap from 240V tap. Replace the wire cap on 240V tap. • Unplug the purple motor wire off the transformer and plug in the yellow motor wire. • Replace the cap on the purple motor wire. • The above airflow table lists the airflow information for air handlers without heater and air handler with maximum heater allowed for each model. • The following formula can be used to calculate the approximate airflow, if a smaller (N kW) than the maximum heater kit is installed. Approximate Airflow = Airflow without heater - (Airflow without heater - Airflow with maximum heater) x (N kW/maximum heater kW) [ ] Designates Metric Conversions 12 Air Electrical Data RH1T/RH2T Series Electrical Data – Blower Motor Only – No Electric Heat RH1T Model RH1T 2417ST 3617ST 3621MT 4821ST 6024ST/4824ST 3617ST 4821ST/4824ST 6024ST 6024ST Voltage Application Phase* Hertz 208/240 1&3 60 115 1 60 460 3 60 HP [W] RPM Speeds Circuit Amps. 1/3 [249] 1/2 [373] 1/2 [373] 3/4 [559] 3/4 [559] 1/2 [373] 3/4 [559] 3/4 [559] 3/4 [559] 300-1100 300-1100 300-1100 300-1100 300-1100 300-1100 300-1100 300-1100 300-1100 4 4 4 4 4 4 4 4 4 1.6 2.7 3.8 3.8 4.6 6.8 8.4 8.4 3.2 Minimum Circuit Ampacity 2.0 4.0 5.0 5.0 6.0 9.0 11.0 11.0 4.0 Maximum Circuit Protector 15 15 15 15 15 15 15 15 15 * Blower motors are all single phase motors. [ ] Designates Metric Conversions 13 Air Electrical Data RH1T/RH2T Series Electrical Data – With Electric Heat RH1T Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1T 2417ST Heater Model No. No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 1.6 16/18 20/20 3.6/4.8 1/60 1 - 4.8 SINGLE 17.3/20.0 1.6 24/27 25/30 RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.0/30.0 1.6 35/40 35/40 RXBH-1724?10J 7.2/9.6 1/60 2 - 4.8 SINGLE 34.6/40.0 1.6 46/52 50/60 RXBH-1724A13J 9.4/12.5 1/60 3-4.17 SINGLE 45.1/52.1 1.6 59/68 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 1.6 21/24 25/25 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0.0 38/44 40/45 RXBH-1724A07C 5.4/7.2 3/60 3 - 2.4 SINGLE 15.0/17.3 1.6 21/24 25/25 RXBH-1724A10C 7.2/9.6 3/60 3 - 3.2 SINGLE 20.0/23.1 1.6 27/31 30/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 1.6 35/40 35/40 RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 2.8 17/20 20/20 RXBH-1724?05J 3.6/4.8 1/60 1 - 4.8 SINGLE 17.3/20.0 2.8 26/29 30/30 RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.0/30.0 2.8 36/41 40/45 RXBH-1724?10J 7.2/9.6 1/60 2 - 4.8 SINGLE 34.6/40.0 2.8 47/54 50/60 RXBH-1724A13J 9.4/12.5 1/60 3-4.17 SINGLE 45.1/52.1 2.8 60/69 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 2.8 23/26 25/30 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0.0 38/44 40/45 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60 2.8 69/79 70/80 3.6/4.8 1/60 1 - 4.8 MULTIPLE CKT 1 17.3/20.0 2.8 26/29 30/30 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 12.8/17 1/60 3-5.68 SINGLE 61.6/70.8 2.8 81/92 90/100 4.3/5.7 1/60 1 - 5.68 MULTIPLE CKT 1 20.5/23.6 2.8 30/33 30/35 8.7/11.3 1/60 2 - 5.86 MULTIPLE CKT 2 41.1/47.2 0.0 52/59 60/60 RXBH-1724A07C 5.4/7.2 3/60 3 - 2.4 SINGLE 15.0/17.3 2.8 23/26 25/30 RXBH-1724A10C 7.2/9.6 3/60 3 - 3.2 SINGLE 20.0/23.1 2.8 29/33 30/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 2.8 37/42 40/45 RXBH-1724A15C 10.8/14.4 3/60 3 - 4.8 SINGLE 30.0/34.6 2.8 41/47 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-5.68 SINGLE 35.5/41.0 2.8 48/55 50/60 RXBH-1724A13J RXBH-1724A15J RXBH-1724A15J RXBH-1724A18J RXBH-1724A18J RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 4.0 19/21 20/25 RXBH-1724?05J 3.6/4.8 1/60 1 - 4.8 SINGLE 17.3/20.0 4.0 27/30 30/30 RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.0/30.0 4.0 38/43 40/45 RXBH-1724?10J 7.2/9.6 1/60 2 - 4.8 SINGLE 34.6/40.0 4.0 49/55 50/60 RXBH-1724A13J 9.4/12.5 1/60 3-4.17 SINGLE 45.1/52.1 4.0 62/71 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 4.0 24/27 25/30 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0.0 38/44 40/45 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60 4.0 70/80 70/80 30/30 RXBH-1724A13J 3621MT/ 4821ST PH/HZ RXBH-1724?05J RXBH-1724A13J 3617ST Heater kW (208/240V) (480V) RXBH-1724A15J RXBH-1724A15J RXBH-1724A18J RXBH-1724A18J RXBH-24A20J (4-ton only) 3.6/4.8 1/60 1 - 4.8 MULTIPLE CKT 1 17.3/20.0 4.0 27/30 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 12.8/17 1/60 3-5.68 SINGLE 61.6/70.8 4.0 82/94 90/100 30/35 4.3/5.7 1/60 1 - 5.68 MULTIPLE CKT 1 20.5/23.6 4.0 31/35 8.7/11.3 1/60 2 - 5.86 MULTIPLE CKT 2 41.1/47.2 0.0 52/59 60/60 14.4/19.2 1/60 4-4.8 SINGLE 69.2/80 4.0 92/105 100/110 • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • Largest motor load is included in single circuit and multiple circuit 1. • If non-standard fuse size is specified, use next size larger standard fuse size. • J Voltage (230V) single phase air handler is designed to be used with single or three phase 230 volt electric heaters. In the case of connecting 3-phase power to the air handler terminal block without the heater, bring only two leads to the terminal block cap, insulate and fully secure the third lead. [ ] Designates Metric Conversions 14 Air Electrical Data RH1T/RH2T Series Electrical Data – With Electric Heat RH1T (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1T Heater Model No. No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector 50/60 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 1 34.6/40.0 4.0 49/55 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 RXBH-24A25J (4-ton only) 18.0/24.0 1/60 6-4.0 SINGLE 86.4/99.9 4.0 113/130 125/150 6.0/8.0 1/60 2.4.0 MULTIPLE CKT 1 28.8/33.3 4.0 41/47 45/50 RXBH-24A25J (4-ton only) 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 2 28.8/33.3 0.0 36/42 40/45 6.0/8.0 1/60 2-4.0 MULTPLE CKT 3 28.8/33.3 0.0 36/42 40/45 RXBH-1724A07C 5.4/7.2 3/60 3 - 2.4 SINGLE 15.0/17.3 4.0 24/27 25/30 RXBH-1724A10C 7.2/9.6 3/60 3 - 3.2 SINGLE 20.0/23.1 4.0 30/34 30/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 4.0 38/43 40/45 RXBH-1724A15C 10.8/14.4 3/60 3 - 4.8 SINGLE 30.0/34.6 4.0 43/49 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-5.68 SINGLE 35.5/41.0 4.0 50/57 50/60 7.2-9.6 3/60 3-3.2 SINGLE 40.0/46.2 4.0 55/63 60/70 RXBH-24A20C (4-ton only) 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 1 20.0/23.1 4.0 30/34 30/35 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 2 20.0/23.1 0.0 25/29 25/30 18.0/24.0 3/60 6-4.0 SINGLE 50.0/57.8 4.0 68/78 70/80 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 1 25.0/28.9 4.0 37/42 40/45 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 2 25.0/28.9 0.0 32/37 35/40 RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 4.6 20/22 20/25 RXBH-1724?05J 3.6/4.8 1/60 1 - 4.8 SINGLE 17.3/20.0 4.6 28/31 30/35 RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.0/30.0 4.6 39/44 40/45 RXBH-1724?10J 7.2/9.6 1/60 2 - 4.8 SINGLE 34.6/40.0 4.6 49/56 50/60 RXBH-1724A13J 9.4/12.5 1/60 3-4.17 SINGLE 45.1/52.1 4.6 63/71 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 4.6 25/28 25/30 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0.0 38/44 40/45 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60 4.6 71/81 80/90 3.6/4.8 1/60 1 - 4.8 MULTIPLE CKT 1 17.3/20.0 4.6 28/31 30/35 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 12.8/17 1/60 3-5.68 SINGLE 61.6/70.8 4.6 83/95 90/100 30/35 RXBH-24A20C (4-ton only) RXBH-24A25C (4-ton only) RXBH-24A25C (4-ton only) RXBH-1724A13J RXBH-1724A15J RXBH-1724A15J RXBH-1724A18J 4.3/5.7 1/60 1 - 5.68 MULTIPLE CKT 1 20.5/23.6 4.6 32/36 8.7/11.3 1/60 2 - 5.86 MULTIPLE CKT 2 41.1/47.2 0.0 52/59 60/60 14.4/19.2 1/60 4-4.8 SINGLE 69.2/80 4.6 93/106 100/110 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 1 34.6/40.0 4.6 49/56 50/60 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 RXBH-24A25J 18.0/24.0 1/60 6-4.0 SINGLE 86.4/99.9 4.6 114/131 125/150 6.0/8.0 1/60 2.4.0 MULTIPLE CKT 1 28.8/33.3 4.6 42/48 45/50 RXBH-24A25J 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 2 28.8/33.3 0.0 36/42 40/45 6.0/8.0 1/60 2-4.0 MULTPLE CKT 3 28.8/33.3 0.0 36/42 40/45 RXBH-1724A07C 5.4/7.2 3/60 3 - 2.4 SINGLE 15.0/17.3 4.6 25/28 25/30 RXBH-1724A10C 7.2/9.6 3/60 3 - 3.2 SINGLE 20.0/23.1 4.6 31/35 35/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 4.6 39/44 40/45 RXBH-1724A15C 10.8/14.4 3/60 3 - 4.8 SINGLE 30.0/34.6 4.6 44/49 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-5.68 SINGLE 35.5/41.0 4.6 51/57 60/60 7.2-9.6 3/60 3-3.2 SINGLE 40.0/46.2 4.6 56/64 60/70 RXBH-1724A18J 4824ST PH/HZ 7.2/9.6 RXBH-24A20J (4-ton only) 3621MT/ 4821ST Heater kW (208/240V) (480V) RXBH-24A20J RXBH-24A20J RXBH-24A20C • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • Largest motor load is included in single circuit and multiple circuit 1. • If non-standard fuse size is specified, use next size larger standard fuse size. • J Voltage (230V) single phase air handler is designed to be used with single or three phase 230 volt electric heaters. In the case of connecting 3-phase power to the air handler terminal block without the heater, bring only two leads to the terminal block cap, insulate and fully secure the third lead. [ ] Designates Metric Conversions 15 Air Electrical Data RH1T/RH2T Series Electrical Data – With Electric Heat RH1T (Cont.) Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH1T Heater Model No. RXBH-24A20C 4824ST RXBH-24A25C PH/HZ No. Elements kW Per Type Supply Circuit Single Circuit Multiple Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 1 20.0/23.1 4.6 31/35 35/35 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 2 20.0/23.1 0.0 25/29 25/30 18.0/24.0 3/60 6-4.0 SINGLE 50.0/57.8 4.6 69/78 70/80 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 1 25.0/28.9 4.6 37/42 40/45 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 2 25.0/28.9 0.0 32/37 35/40 RXBH-1724?03J 2.25/3.0 1/60 1 - 3.0 SINGLE 10.8/12.5 4.6 20/22 20/25 RXBH-1724?05J 3.6/4.8 1/60 1 - 4.8 SINGLE 17.3/20.0 4.6 28/31 30/35 RXBH-1724?07J 5.4/7.2 1/60 2 - 3.6 SINGLE 26.0/30.0 4.6 39/44 40/45 RXBH-1724?10J 7.2/9.6 1/60 2 - 4.8 SINGLE 34.6/40.0 4.6 49/56 50/60 RXBH-1724A13J 9.4/12.5 1/60 3-4.17 SINGLE 45.1/52.1 4.6 63/71 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 4.6 25/28 25/30 RXBH-24A25C RXBH-1724A13J RXBH-1724A15J RXBH-1724A15J RXBH-1724A18J RXBH-1724A18J RXBH-24A20J RXBH-24A20J 4824ST/ 6024ST Heater kW (208/240V) (480V) 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0.0 38/44 40/45 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60 4.6 71/81 80/90 3.6/4.8 1/60 1 - 4.8 MULTIPLE CKT 1 17.3/20.0 4.6 28/31 30/35 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 12.8/17 1/60 3-5.68 SINGLE 61.6/70.8 4.6 83/95 90/100 30/35 4.3/5.7 1/60 1 - 5.68 MULTIPLE CKT 1 20.5/23.6 4.6 32/36 8.7/11.3 1/60 2 - 5.86 MULTIPLE CKT 2 41.1/47.2 0.0 52/59 60/60 14.4/19.2 1/60 4-4.8 SINGLE 69.2/80 4.6 93/106 100/110 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 1 34.6/40.0 4.6 49/56 50/60 7.2/9.6 1/60 2 - 4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 RXBH-24A25J 18.0/24.0 1/60 6-4.0 SINGLE 86.4/99.9 4.6 114/131 125/150 6.0/8.0 1/60 2.4.0 MULTIPLE CKT 1 28.8/33.3 4.6 42/48 45/50 RXBH-24A25J 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 2 28.8/33.3 0.0 36/42 40/45 6.0/8.0 1/60 2-4.0 MULTPLE CKT 3 28.8/33.3 0.0 36/42 40/45 RXBH-24A30J (5-ton only) 21.6/28.8 1/60 6-4.8 SINGLE 103.8/120 4.6 136/156 150/175 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 1 34.6/40.0 4.6 49/56 50/60 RXBH-24A30J (5-ton only) 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 7.2/9.6 1/60 2-4.8 MULTPLE CKT 3 34.6/40.0 0.0 44/50 45/50 RXBH-1724A07C 5.4/7.2 3/60 3 - 2.4 SINGLE 15.0/17.3 4.6 25/28 25/30 RXBH-1724A10C 7.2/9.6 3/60 3 - 3.2 SINGLE 20.0/23.1 4.6 31/35 35/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 4.6 39/44 40/45 RXBH-1724A15C 10.8/14.4 3/60 3 - 4.8 SINGLE 30.0/34.6 4.6 44/49 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-5.68 SINGLE 35.5/41.0 4.6 51/57 60/60 7.2-9.6 3/60 3-3.2 SINGLE 40.0/46.2 4.6 56/64 60/70 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 1 20.0/23.1 4.6 31/35 35/35 7.2/9.6 3/60 3 - 3.2 MULTIPLE CKT 2 20.0/23.1 0.0 25/29 25/30 18.0/24.0 3/60 6-4.0 SINGLE 50.0/57.8 4.6 69/78 70/80 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 1 25.0/28.9 4.6 37/42 40/45 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 2 25.0/28.9 0.0 32/37 35/40 21.6/28.8 3/60 6-4.8 SINGLE 60.0/69.4 4.6 81/93 90/100 10.8/14.4 3/60 3-4.8 MULTIPLE CKT 1 30.0/34.7 4.6 44/50 45/50 10.8/14.4 3/60 3-4.8 MULTIPLE CKT 2 30.0/34.7 0.0 38/44 40/45 RXBH-24A20C RXBH-24A20C RXBH-24A25C RXBH-24A25C RXBH-24A30C (5-ton only) RXBH-24A30C (5-ton only) • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • Largest motor load is included in single circuit and multiple circuit 1. • If non-standard fuse size is specified, use next size larger standard fuse size. • J Voltage (230V) single phase air handler is designed to be used with single or three phase 230 volt electric heaters. In the case of connecting 3-phase power to the air handler terminal block without the heater, bring only two leads to the terminal block cap, insulate and fully secure the third lead. [ ] Designates Metric Conversions 16 2.0 2.0 2421MT No Heater 2421MT With 13 kW Heater Y1 Tap 4 Y2 Tap 5 Y1 Tap 4 Y2 Tap 5 Motor Speed From Factory Blower Size/ Motor HP # of Speeds 10X8 3/4 hp 5 speed 10X8 3/4 hp 5 speed Manufacturer Recommended Air-Flow Range (Min/Max) CFM Y1=310/817 CFM [146/385] L/s Y2=445/951 CFM [210/448] L/s Y1=290/797 CFM [136/376] L/s Y2=425/931 CFM [200/439] L/s Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Motor Speed Y1, Y2 Speed 851 CFM 831 CFM 139 Watts 931 CFM 637 102 Watts RPM 588 797 CFM RPM 93 Watts 593 99 Watts RPM 557 720 CFM RPM 134 Watts 951 CFM 622 97 RPM 573 Watts CFM RPM 88 817 Watts 578 94 Watts RPM 542 740 0.1 [.02] RPM CFM 151 687 891 93 603 679 98 614 684 77 576 549 146 672 911 88 588 699 93 599 704 72 561 569 0.2 [.05] 162 740 852 83 645 554 103 662 633 54 599 290 157 725 872 78 630 574 98 647 653 49 584 310 0.3 [.07] 173 787 804 74 717 495 108 726 570 — — — 168 772 824 69 702 515 103 711 590 — — — 0.4 [.10] 184 836 767 — — — 113 785 521 — — — 179 821 787 — — — 108 770 541 — — — 0.5 [.12] 196 895 722 — — — 118 829 469 — — — 191 880 742 — — — 113 814 489 — — — 0.6 [.15] [ ] Designates Metric Conversions 207 937 671 — — — 123 883 425 — — — 202 922 691 — — — 118 868 445 — — — 0.7 [.17] External Static Pressure—Inches W.C. [kPa] — — — — — — — — — — — — — — — — — — — — — — — — 0.8 [.20] X-13 Wet Coil No Filter CFM Air Delivery/RPM/Watts-230 Volts Notes: Constant Torque (ECM) motor speed changes. All Constant Torque (ECM) motors have 5 speed tabs. Speed tab 1 is for continuous fan. Speed tab 2 (low static) and Speed tab 3 (high static) are for lower tonnage. Speed tab 4 (low static) and Speed tab 5 (high static) are for higher tonnage. Constant Torque air handlers are always shipped from factory at Speed tab 5, except for -4824, which is set at Speed tab 3. For instance, (-)H2T is always shipped at high static 2-ton airflow (Speed tab 5). To change to 1.5-ton airflow, move the blue wire to Speed tab 2 or 3 on the Constant Torque (ECM) motor. The low static Speed tab 2 (lower tonnage) and 4 (higher tonnage) are used for external static below 0.5" WC. The high static Speed tab 3 (lower tonnage) and 5 (higher tonnage) are used for external static exceeding 0.5" WC. Move the blue wire to the appropriate Speed tab as required by the application needs. • The airflow for continuous fan (Speed tab 1) is always set at 50% of the Speed tab 4. • The above airflow table lists the airflow information for air handlers without heater and air handler with maximum heater allowed for each model. • The following formula can be used to calculate the approximate airflow, if a smaller (N kW) than the maximum heater kit is installed. Approximate Airflow = Airflow without heater – (Airflow without heater – Airflow with maximum heater) x (N kW/maximum heater kW) Nominal Cooling Capacity Tons Model No. RH2T Airflow Performance Data RH2T — — — — — — — — — — — — — — — — — — — — — — — — 0.9 [.22] — — — — — — — — — — — — — — — — — — — — — — — — 1.0 [.25] Air Airflow Performance Data RH1T/RH2T Series 17 18 3.0 3.0 3621MT No Heater 3621MT With 18 kW Heater Y1 Tap 4 Y2 Tap 5 Y1 Tap 4 Y2 Tap 5 Motor Speed From Factory Blower Size/ Motor HP # of Speeds 10X10 3/4 Hp 5 speed 10X10 3/4 Hp 5 speed Manufacturer Recommended Air-Flow Range (Min/Max) CFM Y1=434/1005 CFM [204/474] L/s Y2=703/1328 CFM [331/626] L/s Y1=404/975 CFM [190/460] L/s Y2=673/1298 CFM [317/612] L/s Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Motor Speed Y1, Y2 Speed 1128 CFM 202 Watts 1298 CFM 762 104 Watts RPM 622 975 CFM RPM 136 Watts 669 CFM RPM 88 1098 Watts 889 CFM 592 197 RPM 737 1328 CFM RPM 99 Watts 597 RPM CFM Watts 131 1005 Watts 644 83 Watts RPM 567 919 RPM CFM 0.1 [.02] 840 226 214 1188 122 725 849 158 753 977 80 660 566 221 815 1218 798 1243 113 670 912 147 716 1037 84 609 727 209 773 1273 700 117 645 879 153 728 1007 75 108 942 142 691 1067 79 635 596 757 584 0.3 [.07] 0.2 [.05] 238 879 1134 132 815 786 169 829 916 76 716 404 233 854 1164 127 790 816 164 804 946 71 691 434 0.4 [.10] 250 932 1079 141 855 723 180 909 855 — — — 245 907 1109 136 830 753 175 884 885 67 — — 0.5 [.12] 262 1015 1025 150 893 660 192 946 794 — — — 257 990 1055 145 868 690 187 921 824 62 — — 0.6 [.15] [ ] Designates Metric Conversions 1090 286 274 915 — — — 5 1011 673 — — — 281 1065 945 164 — — — 986 703 54 — — 0.8 [.20] 1065 970 — — — 5 970 734 — — — 269 1040 1000 154 — — — 945 764 58 — — 0.7 [.17] External Static Pressure—Inches W.C. [kPa] X-13 Wet Coil No Filter CFM Air Delivery/RPM/Watts-230 Volts Notes: Constant Torque (ECM) motor speed changes. All Constant Torque (ECM) motors have 5 speed tabs. Speed tab 1 is for continuous fan. Speed tab 2 (low static) and Speed tab 3 (high static) are for lower tonnage. Speed tab 4 (low static) and Speed tab 5 (high static) are for higher tonnage. Constant Torque air handlers are always shipped from factory at Speed tab 5, except for -4824, which is set at Speed tab 3. For instance, (-)H2T is always shipped at high static 2-ton airflow (Speed tab 5). To change to 1.5-ton airflow, move the blue wire to Speed tab 2 or 3 on the Constant Torque (ECM) motor. The low static Speed tab 2 (lower tonnage) and 4 (higher tonnage) are used for external static below 0.5" WC. The high static Speed tab 3 (lower tonnage) and 5 (higher tonnage) are used for external static exceeding 0.5" WC. Move the blue wire to the appropriate Speed tab as required by the application needs. • The airflow for continuous fan (Speed tab 1) is always set at 50% of the Speed tab 4. • The above airflow table lists the airflow information for air handlers without heater and air handler with maximum heater allowed for each model. • The following formula can be used to calculate the approximate airflow, if a smaller (N kW) than the maximum heater kit is installed. Approximate Airflow = Airflow without heater – (Airflow without heater – Airflow with maximum heater) x (N kW/maximum heater kW) Nominal Cooling Capacity Tons Model No. RH2T Airflow Performance Data RH2T 298 1110 861 — — — — — — — — — 293 1085 891 173 — — — — — — — — 0.9 [.22] — 1142 806 — — — — — — — — — 305 1117 836 182 — — — — — — — — 1.0 [.25] Air Airflow Performance Data RH1T/RH2T Series 4.0 4.0 4824MT No Heater 4824MT With 25 kW Heater Y1 Tap 4 Y2 Tap 5 Y1 Tap 4 Y2 Tap 5 Motor Speed From Factory Blower Size/ Motor HP # of Speeds 11X11 3/4 hp 5 speed 11X11 3/4 hp 5 speed Manufacturer Recommended Air-Flow Range (Min/Max) CFM Y1=702/1271 CFM [331/599] L/s Y2=992/1673 CFM [468/789] L/s Y1=672/1241 CFM [314/582] L/s Y2=962/1643 CFM [451/772] L/s Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Motor Speed Y1, Y2 Speed 1517 CFM 334 Watts 1643 CFM 751 169 Watts RPM 611 1241 CFM RPM 256 Watts 695 1487 CFM RPM 138 Watts 1166 CFM 588 329 Watts RPM 726 1673 CFM RPM 586 164 RPM 1271 CFM Watts 251 Watts 670 133 Watts RPM 563 1196 0.1 [.02] RPM CFM 808 360 346 1546 173 675 1065 282 760 1375 139 623 864 355 783 1576 168 650 1095 277 735 1405 134 598 894 0.3 [.07] 781 1595 162 635 1121 270 729 1431 138 605 1016 341 756 1625 157 610 1151 265 704 1461 133 580 1046 0.2 [.05] 375 840 1497 185 716 1009 292 792 1317 140 668 789 370 815 1527 180 691 1039 287 767 1347 135 643 819 0.4 [.10] 383 866 1446 191 748 938 301 824 1267 141 721 672 378 841 1476 186 723 968 296 799 1297 136 696 702 0.5 [.12] 394 895 1401 203 799 853 315 857 1217 — — — 389 870 1431 198 774 883 310 832 1247 — — — 0.6 [.15] [ ] Designates Metric Conversions 410 926 1351 216 837 783 327 892 1165 — — — 405 901 1381 211 812 813 322 867 1195 — — — 0.7 [.17] External Static Pressure—Inches W.C. [kPa] 420 954 432 981 1259 — 224 1309 — — 356 965 1038 — — — 427 956 1289 — — — 351 940 1068 — — — 0.9 [.22] 866 715 340 919 1114 — — — 415 929 1339 219 841 745 335 894 1144 — — — 0.8 [.20] X-13 Wet Coil No Filter CFM Air Delivery/RPM/Watts-230 Volts Notes: Constant Torque (ECM) motor speed changes. All Constant Torque (ECM) motors have 5 speed tabs. Speed tab 1 is for continuous fan. Speed tab 2 (low static) and Speed tab 3 (high static) are for lower tonnage. Speed tab 4 (low static) and Speed tab 5 (high static) are for higher tonnage. Constant Torque air handlers are always shipped from factory at Speed tab 5, except for -4824, which is set at Speed tab 3. For instance, (-)H2T is always shipped at high static 2-ton airflow (Speed tab 5). To change to 1.5-ton airflow, move the blue wire to Speed tab 2 or 3 on the Constant Torque (ECM) motor. The low static Speed tab 2 (lower tonnage) and 4 (higher tonnage) are used for external static below 0.5" WC. The high static Speed tab 3 (lower tonnage) and 5 (higher tonnage) are used for external static exceeding 0.5" WC. Move the blue wire to the appropriate Speed tab as required by the application needs. • The airflow for continuous fan (Speed tab 1) is always set at 50% of the Speed tab 4. • The above airflow table lists the airflow information for air handlers without heater and air handler with maximum heater allowed for each model. • The following formula can be used to calculate the approximate airflow, if a smaller (N kW) than the maximum heater kit is installed. Approximate Airflow = Airflow without heater – (Airflow without heater – Airflow with maximum heater) x (N kW/maximum heater kW) Nominal Cooling Capacity Tons Model No. RH2T Airflow Performance Data RH2T 446 1008 1209 — — — 370 1009 962 — — — 441 983 1239 — — — 365 984 992 — — — 1.0 [.25] Air Airflow Performance Data RH1T/RH2T Series 19 Nominal Cooling Capacity Tons 5.0 5.0 Model No. RH2T 6024ST No Heater 20 6024ST With 30 kW Heater Y1 Tap 4 Y2 Tap 5 Y1 Tap 4 Y2 Tap 5 Motor Speed From Factory Blower Size/ Motor HP # of Speeds 11X11 3/4 hp 5 speed 11X11 3/4 hp 5 speed Manufacturer Recommended Air-Flow Range (Min/Max) CFM Y1=785/1350 CFM [370/637] L/s Y2=1249/1844 CFM [589/870] L/s Y1=745/1310 CFM [353/620] L/s Y2=1209/1804 CFM [570/851] L/s Airflow Performance Data RH2T Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Tap 5 Y2 High Static Tap 3 Y2 Low Static Tap 4 Tap 2 Y1 Low Static Y1 High Static Motor Speed Y1, Y2 Speed 1686 CFM 439 Watts 1804 CFM 824 184 Watts RPM 642 1310 CFM RPM 339 Watts 763 CFM RPM 170 1646 Watts 1240 CFM 621 434 RPM 794 1844 CFM RPM 179 Watts Watts 612 CFM RPM 334 1350 Watts 733 165 RPM 591 RPM 1280 Watts CFM 0.1 [.02] 882 465 453 1713 210 725 1200 367 831 1546 180 695 1094 460 852 853 1756 203 684 1256 360 800 1592 175 650 1156 448 823 1753 205 198 1796 695 1240 362 801 1586 175 654 1296 355 770 1632 170 665 1134 1196 620 0.3 [.07] 0.2 [.05] 475 910 1662 230 764 1148 375 860 1498 197 740 1040 470 880 1702 225 734 1188 370 830 1538 192 710 1080 0.4 [.10] 495 938 1615 241 802 1090 392 893 1451 205 772 971 490 908 1655 236 772 1130 387 863 1491 200 742 1011 0.5 [.12] 507 968 1572 247 841 1027 399 921 1407 214 811 905 502 938 1612 242 811 1067 394 891 1447 209 781 945 0.6 [.15] 517 998 1526 258 870 962 416 952 1360 225 848 840 512 968 1566 253 840 1002 411 922 1400 220 818 880 0.7 [.17] External Static Pressure—Inches W.C. [kPa] 535 1027 1480 265 904 891 429 983 1312 236 883 745 530 997 1520 260 874 931 424 953 1352 231 853 785 0.8 [.20] X-13 Wet Coil No Filter CFM Air Delivery/RPM/Watts-230 Volts — 545 1050 1438 281 938 809 443 1012 558 1074 1389 — — — 455 1038 1209 — 1258 — — — 553 — 1044 1429 — — — 450 1008 540 1020 1478 276 908 849 438 982 1249 — 1298 — — — — — 1.0 [.25] 0.9 [.22] Air Airflow Performance Data RH1T/RH2T Series Air Electrical Data RH1T/RH2T Series Electrical Data – Blower Motor Only – No Electric Heat RH2T Model RH2T Circuit Amps. Minimum Circuit Ampacity Maximum Circuit Protector 300-1100 4 1.6 2 15 300-1100 4 3.8 5 15 4 4.6 6 15 Phase* Hertz HP 1/3 208/240 1&3 60 3/4 3/4 300-1100 2421MT 3621MT Speeds Voltage 6024ST/4824MT RPM * Blower motors are all single phase motors. Electrical Data – With Electric Heat Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH2T 2421MT Circuit Amps. 1-3.0 SINGLE 1-4.8 SINGLE 2-3.6 1/60 9.4/12.5 Heater kW (208/240V) (480V) Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector RXBH-1724?03J 2.25/3.0 1/60 RXBH-1724?05J 3.6/4.8 1/60 10.8/12.51.6 1.6 16/18 20/20 17.3/20.0 1.6 24/27 RXBH-1724?07J 5.4/7.2 1/60 25/30 SINGLE 26.0/30.0 1.6 35/40 RXBH-1724?10J 7.2/9.6 35/40 2-4.8 SINGLE 34.6/40.0 1.6 46/52 RXBH-1724A13J 50/60 1/60 3-4.17 SINGLE 45.1/52.1 1.6 59/68 60/70 3.1/4.2 1/60 1-4.17 MULTIPLE CKT 1 15.0/17.4 1.6 21/24 25/25 6.3/8.3 1/60 2-4.17 MULTIPLE CKT 2 30.1/34.7 0 38/44 40/45 RXBH-1724A07C 5.4/7.2 3/60 3-2.4 SINGLE 15.0/17.3 1.6 21/24 25/25 RXBH-1724A10C 7.2/9.6 3/60 3-3.2 SINGLE 20.0/23.1 1.6 27/31 30/35 RXBH-1724A13C 9.4/12.5 3/60 3-4.17 SINGLE 26.1/30.1 1.6 35/40 35/40 RXBH-1724?05J 3.6/4.8 1/60 1-4.8 SINGLE 17.3/20.0 3.8 27/30 30/30 RXBH-1724?07J 5.4/7.2 1/60 2-3.6 SINGLE 26.0/30.0 3.8 38/43 40/45 RXBH-1724?10J 7.2/9.6 1/60 2-4.8 SINGLE 34.6/40.0 3.8 48/55 50/60 RXBH-1724A15J 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60.0 3.8 70/80 70/80 3.6/4.8 1/60 1-4.8 MULTIPLE CKT 1 17.3/20.0 3.8 27/30 30/30 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 2 34.6/40.0 0.0 44/50 45/50 12.8/17.0 1/60 4-4.26 SINGLE 61.6-70.8 3.8 82/94 90/100 RXBH-1724A13J RXBH-1724A15J RXBH-1724A18J 3621MT Type Supply Circuit Single Circuit Multiple Circuit Heater Model No. Ph/Hz No. Elements - kW Per 6.4/8.5 1/60 2-4.26 MULTIPLE CKT 1 30.8/35.4 3.8 44/49 45/50 6.4/8.5 1/60 2-4.26 MULTIPLE CKT 2 30.8/35.4 0.0 39/45 40/45 RXBH-1724A07C 5.4/7.2 3/60 3-2.4 SINGLE 15.0/17.3 3.8 24/27 25/30 RXBH-1724A10C 7.2/9.6 3/60 3-3.2 SINGLE 20.0/23.1 3.8 30/34 30/35 RXBH-1724A15C 10.8/14.4 3/60 3-4.8 SINGLE 30.0/34.6 3.8 43/48 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-2.84 SINGLE 35.6-41.0 3.8 50/56 50/60 RXBH-1724B05J 3.6/4.8 1/60 1-4.8 SINGLE 17.3/20.0 3.8 27/30 30/30 RXBH-1724B07J 5.4/7.2 1/60 2-3.6 SINGLE 26.0/30.0 3.8 38/43 40/45 RXBH-1724B10J 7.2/9.6 1/60 2-4.8 SINGLE 34.6/40.0 3.8 48/55 60/60 RXBH-1724A18J • ? Heater Kit Connection Type A = Breaker B = Terminal Block C = Pullout Disconnect ➀ D Voltage = 480 Volts. *Values only. No single point kit available. NOTES: • Electric heater BTUH - (heater watts + motor watts) x 3.414 (see airflow table for motor watts.) • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • If non-standard fuse size is specified, use next size larger standard fuse size. • Largest motor load is included in single circuit or circuit 1 of multiple circuits. • Heater loads are balanced on 3 phase models with 3 or 6 heaters only. • No electrical heating elements are permitted to be used with A voltage (115V) air handler. • J voltage (208/240V) single phase air handler is designed to be used with single or three phase 208/240V volt electric heaters. In the case of connecting 3 phase power to air handler terminal block without the heater, bring only two leads to terminal block, cap, insulate and fully secure the third lead. • Do not use 480V electrical heaters on 208/240V air handlers. • If the kit is listed under both single and multiple circuits, the kit is shipped from factory as multiple circuits. For single phase application, Jumper bar kit RXBJ-A21 and RXBJ-A31 can be used to convert multiple circuits to a single supply circuit. Refer to Accessory Section for details. [ ] Designates Metric Conversions 21 Air Electrical Data RH1T/RH2T Series Electrical Data – With Electric Heat RH2T Installation of the U.L. Listed original equipment manufacturer provided heater kits listed in the following table is recommended for all auxiliary heating requirements. Air Handler Model RH2T Heater Model No. Ph/Hz No. Elements - kW Per Circuit Amps. Motor Ampacity Minimum Circuit Ampacity Maximum Circuit Protector RXBH-1724?07J 5.4/7.2 1/60 2-3.6 SINGLE 26.0/30.0 4.6 39/44 40/45 7.2/9.6 1/60 2-4.8 SINGLE 34.6/40.0 4.6 49/56 50/60 RXBH-1724A15J 10.8/14.4 1/60 3-4.8 SINGLE 51.9/60.0 4.6 71/81 80/90 30/35 RXBH-1724A18J RXBH-1724A18J RXBH-24A20J RXBH-24A20J 3.6/4.8 1/60 1-4.8 MULTIPLE CKT 1 17.3/20.0 4.6 28/31 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 2 34.6/40.0 0 44/50 45/50 12.8/17 1/60 4-4.26 SINGLE 61.8/70.8 4.6 83/95 90/100 45/50 6.4/8.5 1/60 2-4.26 MULTIPLE CKT 1 30.8/35.4 4.6 45/50 6.4/8.5 1/60 2-4.6 MULTIPLE CKT 2 30.8/35.4 0 39/45 40/45 14.4/19.2 1/60 4-4.8 SINGLE 69.2/80 4.6 93/106 100/110 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 1 34.6/40.0 4.6 49/56 50/60 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 2 34.6/40.0 0 44/50 45/50 RXBH-24A25J 18.0/24.0 1/60 6-4.0 SINGLE 86.4/99.9 4.6 114/131 125/150 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 1 28.8/33.3 4.6 42/48 45/50 RXBH-24A25J 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 2 28.8/33.3 0 36/42 40/45 6.0/8.0 1/60 2-4.0 MULTIPLE CKT 3 28.8/33.3 0 36/42 40/45 RXBH-24A30J (5-ton only) 21.6/28.8 1/60 6-4.8 SINGLE 103.8/120 4.6 136/156 150/175 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 1 34.6/40.0 4.6 49/56 56/60 RXBH-24A30J (5-ton only) 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 2 34.6/40.0 0 44/50 56/60 7.2/9.6 1/60 2-4.8 MULTIPLE CKT 3 34.6/40.0 0 44/50 56/60 RXBH-1724A07C 5.4/7.2 3/60 3-2.4 SINGLE 15.0/17.3 4.6 25/28 25/30 RXBH-1724A10C 7.2/9.6 3/60 3-3.2 SINGLE 20.0/23.1 4.6 31/35 35/35 RXBH-1724A15C 10.8/14.4 3/60 3-4.8 SINGLE 30.0/34.6 4.6 44/49 45/50 RXBH-1724A18C 12.8/17.0 3/60 3-2.84 SINGLE 35.6-41.0 4.6 51/57 60/60 RXBH-24A20C* 14.4/19.2 3/60 3-3.2 SINGLE 40.0-46.2 4.6 56/64 60/70 7.2/9.6 3/60 3-3.2 MULTIPLE CKT 1 20.0/23.1 4.6 31/35 35/35 7.2/9.6 3/60 3-3.2 MULTIPLE CKT 2 20.0/23.1 0 25/29 25/30 18.0/24.0 3/60 6-4.0 SINGLE 50.0/57.8 4.6 69/78 70/80 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 1 25.0/28.9 4.6 37/42 40/45 9.0/12.0 3/60 3-4.0 MULTIPLE CKT 2 25.0/28.9 0 32/37 35/40 21.6/28.8 3/60 6-4.8 SINGLE 60.0/69.4 4.6 81/93 90/100 RXBH-24A20C RXBH-24A25C* RXBH-24A25C RXBH-24A30C* (5-ton only) RXBH-24A30C (5-ton only) 10.8/14.4 3/60 3-4.8 MULTIPLE CKT 1 30.0/34.7 4.6 44/50 45/50 10.8/14.4 3/60 3-4.8 MULTIPLE CKT 2 30.0/34.7 0 38/44 40/45 • ? Heater Kit Connection Type A = Breaker B = Terminal Block C = Pullout Disconnect ➀ D Voltage = 480 Volts. *Values only. No single point kit available. NOTES: • Electric heater BTUH - (heater watts + motor watts) x 3.414 (see airflow table for motor watts.) • Supply circuit protective devices may be fuses or “HACR” type circuit breakers. • If non-standard fuse size is specified, use next size larger standard fuse size. • Largest motor load is included in single circuit or circuit 1 of multiple circuits. • Heater loads are balanced on 3 phase models with 3 or 6 heaters only. • No electrical heating elements are permitted to be used with A voltage (115V) air handler. 22 Type Supply Circuit Single Circuit Multiple Circuit RXBH-1724?10J RXBH-1724A15J 4824MT 6024ST Heater kW (208/240V) (480V) • J voltage (208/240V) single phase air handler is designed to be used with single or three phase 208/240V volt electric heaters. In the case of connecting 3 phase power to air handler terminal block without the heater, bring only two leads to terminal block, cap, insulate and fully secure the third lead. • Do not use 480V electrical heaters on 208/240V air handlers. • If the kit is listed under both single and multiple circuits, the kit is shipped from factory as multiple circuits. For single phase application, Jumper bar kit RXBJ-A21 and RXBJ-A31 can be used to convert multiple circuits to a single supply circuit. Refer to Accessory Section for details. [ ] Designates Metric Conversions Air Electrical Wiring RH1T/RH2T Series Electrical Wiring Power Wiring Grounding • Field wiring must comply with the National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • This product must be sufficiently grounded in accordance with National Electrical Code (C.E.C. in Canada) and any applicable local ordinance. • Supply wiring must be 75°C minimum copper conductors only. • See electrical data for product Ampacity rating and Circuit Protector requirement. • A grounding lug is provided. Accessories • Combustible Floor Base RXHB- • Auxiliary Electric Heater Kits RXBHHeater Kits include circuit breakers which meet UL and cUL requirements for service disconnect. See the Electric Heat Electrical Data in this specification sheet for specific Heater Kit Model numbers. Combustible Floor Base Model Number RXHB-17 RXHB-21 RXHB-24 Model Cabinet Size 17 21 24 • Jumper Bar Kit 3 Ckt. to 1 Ckt. RXBJ-A31 is used to convert single phase multiple three circuit units to a single supply circuit. Kit includes cover and screw for line side terminals. • Jumper Bar Kit 2 Ckt. to 1 Ckt. RXBJ-A21 is used to convert single phase multiple two circuit units to a single supply circuit. Kit includes cover and screw for line side terminals. • Note: No jumper bar kit is available to convert three phase multiple two circuit units to a single supply circuit. • Auxiliary Horizontal Overflow Pan Accessory RXBMNominal Cooling Capacity-Tons 11/2 - 3 31/2 - 5 Auxiliary Horizontal Overflow Pan Accessory Model Number RXBM-AC48 RXBM-AC61 • External Filter Rack RXHF-B17, B21, B24 Model Cabinet Size 17 21 24 Filter Size In. [mm] 16 x 20 [406 x 508] 20 x 20 [508 x 508] 25 x 20 [635 x 508] Part Number* RXHF-B17 RXHF-B21 RXHF-B24 A 16.90 20.40 25.00 *Accommodates 1" filter [ ] Designates Metric Conversions B 20.77 20.77 21.04 • External Filter Base RXHFModel Cabinet Size 21 24 Filter Size In. [mm] 20 x 20 [508 x 508] 25 x 20 [635 x 508] Part Number* RXHF-21 RXHF-24 A 19.20 22.70 B 21.0 25.5 *Accommodates 1" or 2" filter • Horizontal Adapter Kit RXHHThis horizontal adapter kit is used to convert Upflow/Downflow only models to horizontal flow. See the following table to order proper horizontal adapter kit. Horizontal Adapter Kit Horizontal Adapter Kit Model Number (Single Qty.) Model Number (10-Pack Qty.) 2414 RXHH-A01 RXHH-A01 x 10 2417 RXHH-A02 RXHH-A02 x 10 3617/3621 RXHH-A03 RXHH-A03 x 10 3821/4821/4824 RXHH-A04 RXHH-A04 x 10 6024 RXHH-A05 RXHH-A05 x 10 Coil Model • External Filter Base RXHFModel Cabinet Size 17 21 24 Filter Size In. [mm] 16 x 20 [406 x 508] 20 x 20 [508 x 508] 25 x 20 [635 x 508] Part Number* RXHF-17 RXHF-21 RXHF-24 A 15.70 19.20 22.70 B 17.5 21.0 25.5 *Accommodates 1" or 2" filter RXHFRXHF-B 11/2⬙ [38 mm] B B A A 23 Air Limited Warranty RH1T/RH2T Series GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable periods stated, in accordance with the terms of the limited warranty. 24 Conditional Parts (Registration Required) ..........Ten (10) Years *For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate. Air Notes RH1T/RH2T Series 25 Air 26 Notes RH1T/RH2T Series Air Notes RH1T/RH2T Series 27 The new degree of comfort.™ In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Heating, Cooling & Water Heating • P.O. Box 17010 Fort Smith, Arkansas 72917 • www.rheem.com Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1 Brampton, Ontario • L6Y 0P5 PRINTED IN U.S.A 7/14 QG FORM NO. H11-553 REV. 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Has XFA : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 10.0.0 (Macintosh) Create Date : 2014:07:14 13:29:42-05:00 Modify Date : 2014:07:14 14:34:08-05:00 Title : untitled Page Count : 28EXIF Metadata provided by EXIF.tools