Rhine Electronics Co 7096T Transmitter of Remote Control User Manual 20080129 UC7096T
Rhine Electronics Co Ltd Transmitter of Remote Control 20080129 UC7096T
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 898254 |
| Application ID | x1CtfKxpFlvjWIG/1qACTw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 2.55kB (31815 bits) |
| Date Submitted | 2008-02-04 00:00:00 |
| Date Available | 2008-02-04 00:00:00 |
| Creation Date | 2008-01-29 13:52:07 |
| Producing Software | Acrobat PDFWriter 5.0Windows NT ª© |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | 20080129_UC7096T使用手冊.doc |
| Document Creator | 20080129_UC7096T使用手冊 - Microsoft Word |
| Document Author: | user |
INSTRUCTIONS FOR OPERATION UC7096T : SETING THE OPERATING CONTROLS 1.This unit operates on AAA 1.5 volts battery*4 (not included).(We use AAA battery*4) To prevent possible damage if the battery should leak , be sure to remove the battery when the unit is not use . 2. Store the controller away from excess heat or humidity . 3. This remote control unit is required with 16 code combinations. To prevent possible interference from or to other remote units such as garage door openers, car alarm or security system . If you find that your fan and light kit go on and off without using your control , simply change the combination code in your transmitter and receiver . 4.Operation buttons on the panel of transmitter . FAN( D ) key – For fan speed control 甲、 HIàMEDàLOWàOFFà Cycle Operation FAN AUTO key – Auto temp. set-up à manual à cycle set-up 甲、 乙、 丙、 丁、 Temp. Temp. Temp. Temp. of of of of indoor indoor indoor indoor is is is is lower lower lower lower than than than than set-up set-up set-up set-up temp. temp. temp. temp. OFF 0~2℃ 2℃或 4℉ 4℃或 8℉ LOW MED HI SPEED SPEED SPEED TIMER key – Set timer option of FAN OR LIGHT HOUR ▲ key – Have time or temp. up. HOUR ▼ key – Have time or temp. down. FAN/REV key – Fan reverse control LIGHT( @ ) key – For light brightness and ON/OFF control . LIGHT DELAY key – Auto off after 3 mins. 5.Start the fan and Turn off the fan: Press the selected speed button to run the fan at the desired . 6.Light control : Turn the light on or off by only touching the LIGHT CONTROL button . Keep pressing the button in excess of 0.7 second it becomes a dimmer , the light varies cyclically in 0.8 second . 1/1 GENERAL INFORMATION : This REMOTE controller is designed to separately control your ceiling fan speed and light brightness . The Light ON/OFF button will control the light brightness ON/OFF . INSTRUCTIONS FOR INSTALLATION AND OPERATION OF FAN SPEED CONTROLLER A. Setting the code on your new transmitter . 1. Remove battery cover . Press firmly below arrow and slide battery cover off . 2. Slide code switches to your choice of UP and DOWN position . Factory setting is all UP . Do not use this setting . Use ball point pen or small screwdriver . Slide firmly up or down . B. Setting the code on your new Receiver unit . 1. Slide code switches to the same positions as set on your transmitter . They must be set to same positions to work . 2. Replace battery cover on transmitter . 3. Make sure the code switches are on the left positions . NOTICE : The changes or modifications not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment . ＴＨＩＳ ＤＥＶＩＣＥ ＣＯＭＰＬＩＥＳ ＷＩＴＨ ＰＡＲＴ １５ ＯＦ ＴＨＥ ＦＣＣ ＲＵＬＥＳ． ＯＰＥＲＡＴＩＯＮＳ ＩＳ ＳＵＢＪＥＣＴ ＩＮＴＥＲＦＥＲＥＮＣＥ ＡＮＤ （２） ＴＨＩＳ ＤＥＶＩＣＥ ＭＵＳＴ ＡＣＣＥＰＴ ＡＮＹ ＩＮＴＥＲＦＥＲＥＮＣＥ ＲＥＣＥＩＶＥＤ， ＩＮＣＬＵＤＩＮＧ ＩＮＴＥＲＦＥＥＲＥＮＣＥ ＴＨＡＴ ＭＡＹ ＣＡＵＳＥ ＵＮＤＥＳＲＩＥＤ ＯＰＥＲＡＴＩＯＮ． 2/2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 2 Creator : 20080129_UC7096T使用手冊 - Microsoft Word Create Date : 2008:01:29 13:52:07 Title : 20080129_UC7096T使用手冊.doc Author : user Producer : Acrobat PDFWriter 5.0Windows NT ª©EXIF Metadata provided by EXIF.tools