User manual
Diagonal Desktop Bluetooth® Speaker Instruction Manual 7198-45GY Functions: 1. LED Indicator 2. Vol-/Previous Track: Vol- : Press and hold Previous Track: Short press 3. Vol+/Next Track: Vol+: Press and hold Next Track: Short press 4. Play/Pause/Call Function 5. ON/OFF Button 6. 3.5mm AUX Line-in/Speaker Reset Charging Port What’s included: 1 x Bluetooth® Speaker (7198-45GY) 1 x USB to Micro-USB Charging Cable 1 x 3.5mm Aux Line-in Cable 1 x Instruction Manual Tech Specifications • • • Playing time: up to 6 hrs at max volume Charging time: up to 4 hrs Pairing Name: “Diagonal BT” Instructions: (Be sure to fully charge the speaker before using for the first time). 1. Charging the Speaker • Open rubber seal cover, Connect the provided charging cable to a power source and to the micro USB port on the speaker (6). The LED indicator light will glow red when charging and turn off when fully charged. 2. Bluetooth® Setup: • Press and hold ON/OFF Button, LED Indictor will then flash BLUE and RED. • Turn on the Bluetooth function on mobile device, Select “Diagonal BT” pairing name. • LED will flash BLUE if successfully paired * Speaker will automatically pair if the mobile device has been paired before. • Press and hold ON/OFF button to turn off the device 3. Call Function: • Press (4) once to answer a incoming call, press and press again to end call • Press and hold to reject the incoming call • Press (4) twice to redial last called number from the speaker. 4. AUX Function: • Open rubber seal cover(6) to find the speakers AUX-IN port, plug in supplied 3.5mm AUX cable into the port and connect to the mobile device. • LED will turn BLUE when connected. SAFETY PRECAUTIONS: • WARNING-When using this product, basic precautions should always be followed: 1. Read all the instructions before use. 2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). 3. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. 4. To reduce the risk of injury, close supervision is necessary when the product is used near children. 5. Do not expose the device to moisture. 6. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury. 7. Do not use the device if damaged or modified. 8. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. 9. Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury. 10. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion. 11. Ensure that qualified service professionals use only identical replacement parts to ensure product safety FCC Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. MADE IN CHINA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2018:04:23 15:59:31-04:00 Metadata Date : 2018:05:23 13:48:58+08:00 Modify Date : 2018:05:23 13:48:58+08:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:5f53aad4-ed65-4a32-8f58-a73e0ac49527 Original Document ID : xmp.did:cb5e3d22-77e4-4819-8b4c-7b5f70789d97 Document ID : xmp.id:82f37a86-1306-4fef-9e9f-69b23cada3d0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ac407e20-1dd3-4a7c-82f6-321e23cbc4b2 Derived From Document ID : xmp.did:842a09b8-66df-47c7-a8d7-8453a4ce4461 Derived From Original Document ID: xmp.did:cb5e3d22-77e4-4819-8b4c-7b5f70789d97 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:04:23 15:59:31-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CC 13.1 (Macintosh)EXIF Metadata provided by EXIF.tools