Rimage 360I Users Manual User Guide (English)
360i to the manual 4244c115-a4c7-412d-ad3e-6dc338f2fd8c
2015-02-06
: Rimage Rimage-360I-Users-Manual-524061 rimage-360i-users-manual-524061 rimage pdf
Open the PDF directly: View PDF 
.
Page Count: 27
| Download | |
| Open PDF In Browser | View PDF |
Rimage 360i™ User Guide This manual provides the information needed to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide. Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA European Headquarters: Rimage Europe GmbH Hans-Böckler-Straße 7 63128 Dietzenbach, Germany CD and DVD Recording Software Disclaimer This Product, Software, or Documentation may be designed to assist you in reproducing material in which you own the copyright or have obtained permission to copy from the copyright owner. Unless you own the copyright or have permission to copy from the copyright owner, you may be violating copyright law and be subject to payment of damages and other remedies. If you are uncertain about your rights, you should contact your legal advisor. If you are neither in possession of the copyright nor have authorization from the owner of the copyright, unauthorized copying of CDs violates national and international legislation and can result in severe penalties. Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. This document may contain links to web sites that were current at the time of publication, but may have moved or become inactive since. This document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the content of any such third-party site. ©2005, Rimage Corporation Rimage™ is a trademark of the Rimage Corporation. 360i™ is a trademark of the Rimage Corporation. ® Dell is registered trademark of Dell Computer ® Corporation. FireWire is a registered trademark of Apple Computer, Inc. All other trademarks and registered trademarks are the property of their respective owners. Rimage 360i Support information For Rimage 360i™ Support, go to: www.rimage.com/Rimage360iSupport North America South America Asia/Pacific Europe Africa Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA Rimage Europe GmbH Hans-Böckler-Straße 7 63128 Dietzenbach, Germany Contents Contents Introduction ..................................................................................................................... 1 Requirements.............................................................................................................. 1 Software requirements .......................................................................................... 1 Operating System requirements............................................................................ 1 Media requirements............................................................................................... 1 Ink requirements.................................................................................................... 1 Label design requirements .................................................................................... 2 Identify the parts of the Rimage 360i ............................................................................ 3 Front View ............................................................................................................. 3 Rear view .............................................................................................................. 6 Operate the Rimage 360i ................................................................................................ 7 Powering on the Rimage 360i ............................................................................... 7 Pausing the Rimage 360i ...................................................................................... 7 Loading the discs .................................................................................................. 8 Select your printing preferences ................................................................................. 9 Navigating to Printing Preferences........................................................................ 9 Setting the print quality........................................................................................ 10 Adding, editing, or deleting a watermark ............................................................. 10 Adjusting the ink volume used............................................................................. 11 Setting up color options....................................................................................... 11 Changing or enabling masking............................................................................ 12 Printing on hub with a stacking ring..................................................................... 12 Printing on hub without a stacking ring................................................................ 13 Aligning the ink cartridges ................................................................................... 13 Centering the image on the disc.......................................................................... 14 Checking the ink levels........................................................................................ 14 Maintain the Rimage 360i ............................................................................................. 15 General Cleaning ...................................................................................................... 15 Cleaning the exterior ........................................................................................... 15 Cleaning the ink cartridge nozzles ...................................................................... 15 Replace Consumables .............................................................................................. 16 Replacing the fan filter......................................................................................... 16 Replacing the ink cartridges ................................................................................ 17 Learn More..................................................................................................................... 18 Rimage 360i Specifications ................................................................................. 18 Technical support and product updates .............................................................. 19 Safety information ............................................................................................... 19 Safety testing....................................................................................................... 20 Rimage 360i Limited 1 Year Warranty ................................................................ 21 110808_C i Rimage 360i ii Introduction Introduction This manual provides the information needed to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide. Requirements Software requirements The Rimage 360i will operate only with the Rimage 360i Software. Operating System requirements The Rimage 360i and software run only on Windows 2000, and Windows XP, and Windows 2003. Media requirements You must use discs that are coated with a surface that is designed for inkjet printing. The media that is in Rimage Media Kits™ is designed for optimum use in the Rimage 360i. Ink requirements The printer will work only with the following printer cartridges. The following cartridge combinations are supported. Left Position Right Position Description Rimage Part # Color Black Black RB1 Color Photo Color RC1 Color No cartridge Photo RP1 No cartridge Black n Warning: Ink may be harmful if swallowed. Avoid contact with eyes. Ink contains nitrites. If ingested, seek immediate medical attention. Keep out of reach of children. Refilling ink cartridges may result in damage to the cartridge or printer. Rimage ink cartridges are not licensed for modification. - Important! You can use only Rimage ink cartridges in the Rimage 360i. 110808_C 1 Rimage 360i Label design requirements The Rimage 360i Software includes a label editor called CD Designer™, which is installed on your system. You can use CD Designer to design your labels. If you have another software application that you prefer, you can create a label and save it as an Acrobat®(.pdf) file, a .jpg file, or a .tiff file. - Important! Only the Acrobat (.pdf) file can print directly to the Rimage 360i. To create a label with another software application, use the following criteria: • Color Depth – Save the artwork for the label with the color set to at least 256 colors. A color setting higher than 256 colors is recommended. • DPI – Use pictures or logos set to 300 DPI (dots per inch). • Label Design Size – A standard disc is 120mm (4.723”). The hole is 15mm (0.59”). The printable area and hub sizes vary depending on the disc manufacturer. • Media – The media that is in Rimage Media Kits™ has a hub area of 23 mm and a printable area of 118 mm. On most labels, print settings of 24 mm and 118 mm are recommended. 2 110808_C Identify the parts of the Rimage 360i Identify the parts of the Rimage 360i This section describes the Rimage 360i hardware and its features. Front View Input Door Project Status Indicator (PSI) Front Cover Ink Cartridge Access Door Disc Output 110808_C 3 Rimage 360i Rimage 360i Buttons On the right side of the Rimage 360i, there is one button. Pause button • Press this button once to pause the Rimage 360i. • Press this button again to return to normal operation. Inside the front cover of the 360i, there are three buttons. To access these buttons, open the front cover. n Warning: Touch only the buttons indicated below. Touching the inner parts of the 360i may cause equipment failure or injury and may void your warranty. Red (top) Press this button to power the 360i printer on and off. Green (middle) Press this button to move the 360i printer tray in and out. Black (bottom) Press this button to cancel printing. 4 110808_C Identify the parts of the Rimage 360i Rimage 360i Project Status Indicator (PSI) On the front of the Rimage 360i is the Project Status Indicator (PSI), made up of 5 LEDs. LED: Light-emitting diode. A type of diode that emits light when current passes through it. The PSI communicates Rimage 360i, disc, printer, and recorder status. Some of the functions communicated include: Image Name Power Disc in motion Disc in recorder Disc printing Ink status 110808_C • Power • Disc moving • Disc in recorder • Disc printing • Ink status Functionality • The power LED is green when the Rimage 360i is powered on. • The power LED is amber when the Rimage 360i is paused. • The disc in motion LED is solid green when the disc is still. • The disc in motion LED blinks green when the disc is in motion. • The disc in motion LED blinks amber when the Rimage 360i is out of blank discs. • The disc in recorder LED is green when the disc is in the recorder. • The LED is dim when there is no disc in the recorder. • The LED is amber when the recorder state is unknown. • The disc printing LED blinks green when the printer is printing or when the printer tray is in motion. • The disc printing LED is solid green when the printer is idle. • The disc printing LED is solid amber when the ink cartridge access door is open. • The ink status LED is solid green when the cartridges are functioning properly. • The ink status LED is amber when the ink is low or out. • The ink status LED blinks amber if the cartridges are not installed properly. 5 Rimage 360i Rear view Filter Cover Rear Cover Power Switch Power Cord Port USB 2.0 Port 6 110808_C Operate the Rimage 360i Operate the Rimage 360i This section provides the information that you need to produce CDs or DVDs with the Rimage 360i. Powering on the Rimage 360i 1. To power on the 360i, press the power switch on the rear of the 360i. The Rimage 360i initializes. 2. To power off the 360i, press the power switch again. Pausing the Rimage 360i Before you load or unload discs from the Rimage 360i, you must pause it. 1. To pause the 360i, press the pause button once. The 360i pauses. The power LED is amber. 2. To return to normal operation, press the pause button again. The power LED is green. 110808_C 7 Rimage 360i Loading the discs 1. Open the input door. 2. Place up to 25 discs in the disc input with the printable side facing out. 3. Close the input door. 8 110808_C Operate the Rimage 360i Select your printing preferences Printing Preferences allows you to set up and run your Rimage 360i to produce the best possible label on your discs. Through Printing Preferences, you can: # Tip: For additional information about these features, access the online help in Printing Preferences. • Set the print quality • Adjust the ink volume used • Change or enable masking • Printing on hub with a stacking ring • Printing on hub without a stacking ring • Center the image on the disc • Check the ink levels • Add, edit, or delete a watermark • Set up color options • Align the ink cartridges Navigating to Printing Preferences You must access the Disc Color 360i Printing Properties window to set up your printing preferences. Use either procedure below to navigate to the Disc Color 360i Printing Properties window. Accessing Printing Preferences through Windows Start menu 1. From the Windows Start menu: • In Windows 2000, navigate: Settings > Printers. • In Windows XP, navigate: Settings > Printers and Faxes. 2. Right-click on the Disc Color 360i and select Printing Preferences from the drop-down menu. The Disc Color 360i Printing Properties window opens. Accessing Printer Preferences through CD Designer Note: Properties set in the label file will override the printer driver settings. 1. In CD Designer, open a label file. 2. From the File menu, select Print. The Print window opens. 3. From the Printer Name drop-down list, select Disc Color 360i. 4. Select the Document Properties button. The Disc Color 360i Properties window opens. 110808_C 9 Rimage 360i Setting the print quality Use this procedure to change the print quality for your images, if necessary. 1. Navigate to Printing Preferences (refer to page 9). 2. Select the Disc/Quality tab. 3. In the Disc Options panel, select the appropriate Type from the drop-down list. 4. In the Print Quality panel, select the desired print quality. When you select a print quality, the following information about the quality displays: • Black render dpi • Color input dpi • Color output 5. If necessary, change digital photography options. a. In the Print Quality box, select the Digital Photography button. The Digital Photography Options window opens. b. Select the desired options. c. Select OK. The Digital Photography Options window closes. 6. When you have made the desired print quality changes, select OK. The Disc Color 360i Properties window closes. Adding, editing, or deleting a watermark This functionality allows you to create a new watermark or edit a currently existing watermark that you can print on your disc. From this tab, you can also delete a current watermark that you created. 1. 2. 3. Navigate to Printing Preferences (refer to page 9). Select the Effects tab. From the Watermarks drop-down list, select the desired watermark. Or If desired, edit the watermark or create a new watermark. a. Select Edit. The Watermark Details window opens. b. To delete a watermark, highlight the desired watermark and select Delete. Note: You can delete only watermarks that you or another user has created. You cannot c. d. 5. delete any of the default watermarks. To create a new watermark, select New. ‘Untitled’ displays in the Current Watermarks field. Enter or change information in one or more of the following fields to create your customized watermark: • Watermark Message – Enter the desired message. • Message Angle – Select the appropriate radio button to provide the desired angle. If you select the Angle radio button, you can set the angle. • Options – Select the Justified Across Page radio button to center and justify the text. • Font Attributes – Select the desired font attributes from the drop-down lists. e. Select OK. The Watermark Details window closes. If you want the watermark to print only on the first disc, select the First Page Only checkbox. 7. When you have made the desired choices, select OK. The Disc Color 360i Properties window closes. 10 110808_C Operate the Rimage 360i Adjusting the ink volume used This functionality allows you to adjust the amount of ink that is used. 1. Navigate to Printing Preferences (refer to page 9). 2. Select the Basics tab. 3. Select Advanced Features. The Advanced Features window opens. 4. To increase or decrease the ink volume or dry time, move the Ink Volume and Dry Time sliders. - Important! Do not select the Low Memory checkbox. 5. Select OK. The Advanced Features window closes. 8. When you have made the desired choices, select OK. The Disc Color 360i Properties window closes. Setting up color options This functionality allows you to toggle between color and grayscale printing, select the type of color space your labels require, and adjust some color attributes. 1. Navigate to Printing Preferences (refer to page 9). 2. Select the Color tab. 3. Turn Print in Grayscale on or off. a. In the Color Options box, select or clear the Print in Grayscale checkbox. b. If you selected the checkbox, select the appropriate radio button for your print type. 4. To adjust color attributes, move the Saturation, Brightness, and/or Color Tone sliders to the desired position. 5. If necessary, select the appropriate Color Space from the drop-down list. 6. When you have made the desired choices, select OK. The Disc Color 360i Properties window closes. 110808_C 11 Rimage 360i # Tip If you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run. Changing or enabling masking This functionality allows you to adjust the non-printable area, or mask, settings for standard CD/DVD 120 mm media. 1. Navigate to Printing Preferences (refer to page 9). 2. Select the Mask Settings tab. 3. To enable mask settings, select the Enable Masking checkbox. 4. Change the mask settings as desired. 5. When you have made the desired choices, select OK. The Disc Color 360i Properties window closes. Note: Select the Default button to return mask settings to the factory settings. # Tip: The image below shows a disc with a stacking ring. Printing on hub with a stacking ring This functionality allows you to print on the hub area of the disc. If your discs have a printable hub area, and there is a gap for the stacking ring, use this procedure. 1. Navigate to Printing Preferences (refer to page 9). 2. Change mask settings. a. Select the Mask Settings tab. b. Select the Enable Masking checkbox. c. # Tip: If you print on areas of the disc where the surface is not suitable for printing, the ink will smear or run. # Tip: Most discs with a printable hub and a stacking ring have the following printable areas: Standard Area Outer Diameter 118 mm Inner Diameter 38 mm Hub Area In the Hub Area Settings box, select the Printing on Hub checkbox. 3. Measure the printable area and adjust the settings. a. Measure the inner diameter of the printable surface. b. In the Hub Area Settings, enter the inner diameter that you measured in step a. c. Measure the outer diameter of the printable hub area. d. In the Hub Area Settings, enter the outer diameter that you measured in step c. e. Measure the inner diameter of the standard printable area. f. In the Standard Area Settings, enter the diameter that you measured in step e. 4. After you have entered the correct measurements, select OK. The Disc Color 360i Properties window closes. Outer Diameter 35 mm Inner Diameter 24 mm 12 110808_C Operate the Rimage 360i # Tip: The image below shows a disc with no stacking ring. Printing on hub without a stacking ring This functionality allows you to print on the full surface of a disc that has no stacking ring. If you print on areas of the disc where the surface is not suitable for printing, the ink can smear or run. 1. Navigate to Printing Preferences (refer to page 9). 2. Change mask settings. a. Select the Mask Settings tab. b. Select the Enable Masking checkbox. c. # Tip: Rimage recommends that you set the inner diameter so that it is 1 mm greater than the actual measurement to prevent the ink from smearing. The inner diameter on Rimage media is 23 mm. Set the inner diameter field to 24 mm. In the Hub Area Settings box, select the Printing on Hub checkbox. 3. Measure the printable area and adjust the settings. a. Measure the inner diameter of the printable surface. b. In the Hub Area Settings, change the Outer Diameter and Inner Diameter settings to the value measured in step a before changing any other diameter settings. c. In the Standard Area Settings, change the Inner Diameter to the same value used in step b. 4. After you have entered the correct measurements, select OK. The Disc Color 360i Properties window closes. Aligning the ink cartridges For optimal print quality and maximum printing speed, use this procedure to align the ink cartridges. 1. Navigate to Printing Preferences (refer to page 9). 2. At the Rimage 360i, open the front cover. 3. Press the green (middle) button. The printer tray opens. 4. Align the ink cartridges. 5. a. From the Disc Color Printer 360i Printing Preferences window, select the Service tab. b. Select the Service ToolBox button. The Rimage Service Toolbox window opens. c. Select the Align Cartridges button. The Align Cartridges for Disc Color 360i dialog box opens. d. To align the ink cartridges, follow the instructions in the Align Cartridges for Disc Color 360i dialog box. e. To close the Align Cartridges for Disc Color 360i dialog box, select OK. To close the Disc Color 360i Printing Properties window, select OK. 6. To close the printer tray, press the green (middle) button. The printer tray closes. 7. Close the front cover. 110808_C 13 Rimage 360i Centering the image on the disc The Rimage 360i provides two ways to center the image on the disc. You can use the Auto Centering method or the Manual Centering method. The Auto Centering method is accurate to within +/- 0.5 mm. You can improve the centering position accuracy with the manual centering adjustment to better than +/- 0.2 mm. For optimal print quality, use this procedure to center the image on the disc. # Tip: Use the Center Image functionality only if the printed image is not centered on the disc. Image centering is set at the time of manufacture and usually does not need to be recalibrated in the field. 1. Navigate to Printing Preferences (refer to page 9). 2. At the Rimage 360i, open the front cover. 3. To open the printer tray, press the green (middle) button inside the front cover of the Rimage 360i. The printer tray opens. 4. On the Service tab, select the Service ToolBox button. 5. Select the Center Image button. The Centering Margins for Disc Color 360i dialog box displays. 6. Follow the directions in the dialog box to: Auto center the image Or Manually center the image 7. When the image is centered, select OK to close the Centering Margins for Disc Color Printer 360i dialog box. 8. To close the Rimage Service ToolBox window, select OK. 9. To close the Disc Color 360i Properties window, select OK. 10. To close the printer tray, press the green (middle) button. The printer tray closes. 11. Close the front cover. # Tip: If you remove the ink cartridges and reinsert them, the system resets to show that the cartridges are full, regardless of the actual fill status. Checking the ink levels This functionality allows you to check the level of ink in the cartridges. 1. Navigate to Printing Preferences (refer to page 9). 2. On the Service tab, select the Service ToolBox button. 3. Select the Get Ink Level button. Ink level information displays in the Printer Status field. 4. To close the Rimage Service ToolBox window, select OK. 5. To close the Disc Color 360i Properties window, select OK. 14 110808_C Maintain the Rimage 360i Maintain the Rimage 360i The procedures in this section will help keep your Rimage 360i in optimum operating condition. General Cleaning # Tip: To keep your Rimage 360i clean, keep it in a dust free environment. # Tip: Use only Rimage inkjet print cartridges and, for best results, follow the guidelines below: • • Keep print cartridges sealed in the original package until they are needed. Store print cartridges at room temperature (60 - 78 degrees F or 15.6 to 26.6 degrees C) • Store print cartridges in an upright position - not on their sides or upside down. • Do not remove the protective tape from a new print cartridge until just before you install it. Once you remove the tape, do not reapply it. • After you have removed the protective tape, avoid touching the contacts and nozzles. • Print at least once a month to keep the print cartridges in good working order. 110808_C Cleaning the exterior If your Rimage 360i becomes dusty: 1. Power off the Rimage 360i. 2. Wipe the exterior with a damp, lint-free cloth. Cleaning the ink cartridge nozzles This functionality allows you to clean or open the ink cartridge nozzles. The nozzles may become clogged from dried ink causing poor print because one or more nozzles are not delivering the appropriate quantity of ink. 1. Navigate to Printing Preferences (refer to page 9). 2. On the Service tab, select the Service ToolBox button. 3. Select the Clean Cartridges button. The Cleaning Cartridges window opens. 4. To clean the ink cartridge nozzles using the least amount of ink, select Light. The status field at the bottom of the Cleaning Cartridges window displays a message when the cleaning is complete. Note: Print a test disc after cleaning the ink cartridge nozzles. If the print quality is poor, repeat this process and, in step 4, select Medium or Heavy to clean the ink cartridge nozzles. 5. To close the Cleaning Cartridges window, select OK. 6. To close the Rimage Service ToolBox window, select OK. 7. To close the Disc Color 360i Properties window, select OK. 15 Rimage 360i Replace Consumables Replacing the fan filter The fan filter is a consumable item. You will need to change the fan filter after 20 ink cartridges. Use this procedure to change the fan filter. 1. On the rear of the Rimage 360i, press the tab on the filter cover and lift up the filter cover. 2. Remove the filter. 3. Place the new fan filter in the fan filter retainer. 4. Firmly press the fan filter cover back into place. 16 110808_C Maintain the Rimage 360i Replacing the ink cartridges Use this procedure to change the ink cartridges on your Rimage 360i. - Important! You must use the appropriate ink cartridges in one of the configurations as stated on page 1 of this document. 1. Open the ink cartridge access door. The ink cartridge carriage moves to an accessible position on the carriage guide. 2. When the ink cartridge carriage has stopped moving, lift the ink cartridge latch to the open position. 3. Remove the installed ink cartridge. 4. Remove a new ink cartridge from its packaging and carefully remove the protective tape that covers the ink nozzles. - Important! Do not touch the nozzles or the copper contacts on the ink cartridges. Do not remove the copper strips. 5. Slide the ink cartridge into the cradle. 6. Push down on the ink cartridge latch until it snaps closed. 7. Close the ink cartridge access door. Note: If the ink cartridge is not securely seated in the cradle, the printer will not recognize the ink cartridge. The printer may not reset properly or you may receive an “invalid ink cartridge” message. If this happens: a. Remove the cartridge and reinsert it. b. Make sure you are using the appropriate cartridge. Acceptable cartridges are listed in the Ink requirements section on page 1. c. If the problem persists, replace the cartridge. 8. Using the Aligning the ink cartridges procedure on page 13, align the ink cartridges. 110808_C 17 Rimage 360i Learn More Rimage 360i Specifications Standard System One disc recorder, Rimage 360i with Rimage 360i Disc Color Printer, and software. Software requirements Rimage 360i Software Input bin capacity 25 Discs Output capacity 25 Discs Physical size Width – 15.25” (38.7 cm) Height – 19.00” (48.3 cm) Depth – 20.00” (50.8 cm) Weight – 25 lb (11.34 kg) Minimum PC requirements Processor: Pentium III, 800 MHz or higher RAM/Memory: 256MB Fixed Storage: 2 GB of free space Graphics: 1024 x 768 High Color I/O: One USB 2.0 port If you do not understand these requirements, ask your computer technician for help or refer to your PC documentation. Supported Operating Systems Windows 2000 SP4, Windows XP SP1 or SP2, Windows 2003 Power 100 – 240 VAC, 1.5 A, 60/50 Hz Operating Temperature 60° to 95° F (16° to 35°C) Humidity 40 to 80% non-condensing Storage Temperature 5° to 95° F (-15° to 35°C) 18 110808_C Learn More Technical support and product updates Support for the Rimage 360i is available through your authorized reseller. - Important! Register your Rimage 360i online or complete and return the registration card so Rimage can notify you of upgrades as they become available. Safety information This manual and the indications on the product allow proper and safe operation. The indication marks below help protect you and other persons from injury, and equipment from damage. n Warning! According to ANSI (American National Standards Institute) standards, a warning is used to indicate situations that could result in bodily injury to personnel operating or maintaining the equipment. p Caution: Indicates that failure to observe this guideline could result in loss or damage to the equipment, product, software, or data. Safety precautions To ensure safety, please read the precautions in the User Guide and familiarize yourself with their meaning before using the equipment. p Caution: For continued protection against risk of fire, replace the fuse only with same type and rating. An authorized technician should perform all service procedures. n Warning! The laser beam used by this CD Recorder is a Class 1 laser. Do not attempt to open the recorder. An authorized technician should perform all service procedures. n Warning! Ink may be harmful if swallowed. Avoid contact with eyes. Ink contains nitrites. If ingested, seek immediate medical attention. Keep out of reach of children. 110808_C 19 Rimage 360i Safety testing Product name: Rimage 360i Model: RAS17 Notice for USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product complies with UL 60950-1. Notice for Canada C This Class B digital apparatus complies with Canadian ICES-003 Issue 3:1997. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. This product complies with CAN/CSA-C22.2 No. 60950-1-03 Notice for Europe This product is in conformity with the EMC Directive (89/336/EEC) and the Low-Voltage Directive (73/23/EEC) through compliance with the following European standards: EN 55022: 1998 + Amd 1: 2000 Class B Limit; EN 55024: 1998; EN 61000-3-2:2000; EN 61000-3-3:1995 + Amd 1: 2001; EN 60950: 2000. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC. Notice for Japan This product complies with VCCI V.3/2004.04 20 110808_C Learn More Rimage 360i Limited 1 Year Warranty Rimage warrants, to the original end user only, that all non-consumable parts of the Rimage 360i Autoloader products will be free from defects in material and workmanship for 12 months, according to the following terms: • Rimage will provide 30 days of free telephone support beginning on the day that the Rimage software is activated. Telephone support after the free 30 day period will be provided pursuant to Rimage’s then current standard support charges. • Rimage will replace or repair, at Rimage's discretion, any non-consumable parts found defective within the Warranty period. • Valid from the date that the Rimage software is activated. • Factory depot repair: To Rimage’s US depot repair location from a location within the US or Canada with a typical response of 15 business days. To Rimage’s European depot repair location from a location in Europe with a typical response of 15 business days. To Rimage US depot repair from a location that is not in the US or Canada with a typical response of up to 25 business days. • Advanced Replacement or faster response Maintenance Contracts are available for an additional fee. • Rimage will pay ground service freight charges for components shipped to you. • Covers normal office-environment use in the country of original purchase. The use of non-Rimage certified parts may void this warranty. The use of non-Rimage ink cartridges or refilling of ink cartridges voids the equipment warranty or maintenance coverage. Any applicable ink cartridge warranty shall not apply to Rimage ink cartridges that have been refilled, remanufactured, refurbished, misused, or tampered with in any way. This Warranty does not include the following: • Work done at the customer's location, or customer's loss of data. • Shipment costs of equipment or components returned to the Rimage factory. • Equipment malfunctions as a result of repairs made by technicians who are not authorized or certified by Rimage. • Equipment or parts that were tampered with, misused, neglected, or that were modified in any respect without the written consent of Rimage. • Equipment or parts that have been damaged due to shipping or accidents, or damaged by lightning, storms, water, or power surges. • Printer consumables including ink cartridges or print head. You may not assign this Warranty without Rimage's written consent. Rimage is the intended beneficiary of this Warranty; if there is any inconsistency between this Warranty and any other agreement included with or relating to Rimage products, this Warranty shall govern. If any term of this Warranty is illegal or unenforceable, the legality and enforceability of the remaining provisions are not affected or impaired. This Warranty is to be interpreted under the laws of the State of Minnesota, without giving effect to conflict of law rules. Rimage must receive written notice of any claimed defect or failure to perform within five (5) days after such failure or defect is first observed. For warranty service, contact Rimage at the telephone numbers listed on the Warranty Contact Sheet. The Limited Warranty set forth above is Rimage's only Warranty in connection with the Rimage 360i Autoloader product. All other Warranties, whether written or oral, express or implied, contractual or statutory, including, but not limited to any Warranties of merchantability or fitness for any particular purpose are specifically excluded and disclaimed. In no event shall Rimage's liability under this Warranty exceed the obligation to repair or replace, at Rimage's discretion, a Warranted product, and, without limiting the foregoing, Rimage's liability under this Warranty shall not exceed the cost of the covered product. 110808_C 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Company : Rimage Corp Source Modified : D:20050623141010 Create Date : 2005:06:23 09:10:37-05:00 Modify Date : 2005:06:23 09:17:14-05:00 Creator Tool : Acrobat PDFMaker 7.0 for Word Metadata Date : 2005:06:23 09:17:14-05:00 Document ID : uuid:e5fbb334-530c-4a3f-8efb-339ca2ec22fa Instance ID : uuid:f33fa4a0-fefb-43db-ac33-d415077b780e Version ID : 16 Format : application/pdf Title : Rimage 360i User Guide (English) Creator : Adrianna Greenwald Description : 110808_C Headline : 110808_C Page Count : 27 Page Layout : OneColumn Subject : 110808_C Author : Adrianna Greenwald Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools