Ring BHALP011 Ring Video Doorbell Wired User Manual Ring Video Doorbell Setup and Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	2970217
Application ID	IvZPmxVlIZelk6NJpcVJMQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.37kB (567170 bits)
Date Submitted	2016-04-26 00:00:00
Date Available	2016-10-23 00:00:00
Creation Date	2016-03-15 22:08:57
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-04-18 14:38:23
Document Title	Ring Video Doorbell Setup and Installation Guide
Document Creator	Adobe InDesign CC 2015 (Macintosh)
Document Author:	Ring.com

Welcome
Hi, I’m Jamie Siminoff,
inventor of your Ring Video
Doorbell Pro.
Congratulations on
purchasing the world’s most
VIDEO DOORBELL PRO
advanced doorbell!
With Ring, you’ll always
Setup and
Installation Guide
know who’s at your door,
whether you’re across town,
on vacation, or just can’t
come to the door. As my
wife likes to say, “Ring is like
caller ID for the front door.”
Step 1
If you need extra
help…
Download the Ring app
Our support team is
entire process outlined in this manual,
available 7 days a week, and
but in case you like reading small print
our online help center is
we’ve included this manual as well.
accessible 24/7.
Contact our support team
directly at:
800-656-1918
help@ring.com
What You’ll Need to Install Your Ring Doorbell
Step 2
Step 3
Say “Hello” to your Ring Video Doorbell Pro
Check out all the cool stuff in the box
1 Ring Screwdriver - Use the Phillips end for tightening the
Back
Front
The Ring app will walk you through the
screws that hold the doorbell wiring and the doorbell in place,
and the star-shaped end for tightening the security screw.
Mounting
holes
Setup
button
3 Anchors - For concrete, stucco, or brick installs.
Terminals
(attach your
existing wiring
here)
Step 4
Remove your existing
doorbell
To get started, shut off
Installing Anchors (optional)
Step 5
Install anchors (on
stucco, brick, or
concrete)
1 Drill Bit - Use to drill holes if using the anchors.
power at the breaker.
3 Screws - For attaching Ring Doorbell to your wall.
Then remove your existing
concrete, use the provided
doorbell from the wall and
bit to drill two holes in your
Visit the online setup guide
2 Security Screws - Use one to secure the faceplate.
disconnect the wires.
wall, and install the anchors.
We have an online guide with videos
2 Extra Wires - Use these if you have trouble attaching your
Visit: ring.com/app
Visit our online help
center at: ring.com/help
and tutorials on setting up and using
your Ring Video Doorbell Pro.
View the online setup guide at:
ring.com/setup
4 Faceplates
existing wiring to the back of your Ring Doorbell.
Pick the one that
2 Wire connectors - Use to connect the extra wire (above)
best matches your
to your existing wiring.
home…or your mood.
Change it any time.
1 Pro Power Kit - Install the Pro Power Kit after installing
your Ring Doorbell. It’s got its own manual.
On stucco, brick, or
As a reminder, this
If you’re installing on wood
entire process is
or siding, put the anchors
explained in a video inside
in that drawer of stuff you
the Ring app.
never use and skip this step.
Step 6
10
11
12
Step 8
Wire your Ring Doorbell
Shared Users
Connect the wires from your wall
Follow the in-app
setup process
to the back of your Ring Doorbell.
In the Ring app, select the
events and view recordings (if cloud
option to add a new device
Then feed the wiring into your
and, when prompted, select
wall, and screw in your Ring
Video Doorbell Pro.
Doorbell.
To let family or friends answer live
recording is enabled), select Shared
Users on the settings screen of the Ring
app, and enter their email(s).
13
Step 9
Install the Pro Power Kit
Install the faceplate
inside your home on your
This optional feature saves events
to communicate messages.
Here are some common ones:
You can view, download, and share
these events on any device running the
Ring app, or at: ring.com/account
Motion detection is disabled by default.
Select the Live View button on the
with a security screw, and
detection, select Motion Settings on the
The instructions are
the star-shaped end of your
settings screen of the Ring app.
It doesn’t matter which wire
provided in a separate
Ring screwdriver.
connects to which screw.
manual.
Doorbell Pro uses various patterns
captured by your Ring Doorbell Pro.
Live View
To enable and customize motion
15
The front light on your Ring
Motion Detection
Secure one of the faceplates
internal doorbell.
14
Cloud Video Recording
Step 7
Install the Pro
Power Kit
Answering Your Door
When the button on your Ring Doorbell is pushed, or if
For additional help, visit: ring.com/help
For immediate assistance,
we’re available 7 days a week at:
Domestic: 1-800-656-1918
International: +1 310-929-7085
In Setup
Mode
White Spinning
Powered
White Solid
1523 26th St.
Santa Monica, CA 90404
Front Button
Pushed
Blue Spinning
Hereby, Bot Home Automation, declares that this consumer electronic is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at www.ring.com/DoC.pdf.
Ring Speaker
Enabled
Blue Solid
help@ring.com
motion is detected, you can perform the following actions:
Disable/enable your
microphone
Mute/unmute sound
in the app
Zoom in/out
Access the Ring Plus menu
settings screen of the Ring app to
access a live stream of video from your
Ring Doorbell Pro at any time.
Customer Support
Protect the device from direct sunlight. Install the device at dry locations and protect it against rain and humidity. The device may
not get contact to salt water or other conductive liquids. The device must be charged only within a building in a dry state.
Caution: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
You can toggle alerts for rings or
motions on or off in the Ring app.
Updating
software
© 2016 Bot Home Automation, Inc.
White Flashing
RING, ALWAYS HOME, and CHIME are trademarks of Bot Home Automation, Inc.
Last updated: 03/15/16
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
16
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
High Power Radars: High power radars are allocated as primary users (meaning they have
priority) in the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could
cause interference and/or damage to Wireless LAN devices used in Canada.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bandes 5250 - 5350 MHz et 5650 - 5850 MHz. Ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN-EL.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de
distance entre la source de rayonnement et votre corps
CAN ICES-3 (B)/NMB-3(B)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Ring.com
Create Date                     : 2016:03:15 22:08:57-04:00
Modify Date                     : 2016:04:18 14:38:23+08:00
Subject                         : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Title                           : Ring Video Doorbell Setup and Installation Guide
Creator                         : Ring.com
Description                     : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Metadata Date                   : 2016:04:18 14:38:23+08:00
Rating                          : 5
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:3a3d8505-7e82-474c-890a-7dff28c395ab
Original Document ID            : xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Document ID                     : xmp.id:0108ea2c-62d1-40d5-996d-e0224479a667
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:2d304f40-9f79-47c8-8e60-13dc6c9331d9
Derived From Document ID        : xmp.did:5c52ade8-f053-4bd3-8494-db9ce2e07bc0
Derived From Original Document ID: xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:03:15 22:08:57-04:00
Marked                          : True
Authors Position                : Setup and Installation Guide
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools