Ring BHAMS001 Motion Sensor User Manual Ring Video Doorbell Setup and Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	4128775
Application ID	AtOdp0NiH9npqNm1kekzJA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.19kB (514891 bits)
Date Submitted	2019-01-03 00:00:00
Date Available	2019-01-03 00:00:00
Creation Date	2018-09-19 14:40:12
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2019-01-02 17:08:52
Document Title	Ring Video Doorbell Setup and Installation Guide
Document Creator	Adobe InDesign CC 13.0 (Macintosh)
Document Author:	Ring.com

55mm
92mm
Beams
Motion Sensor
1. Connect your
Motion Sensor.
Set up your
Ring Beams Bridge.
The Bridge connects your
Ring Beams lights to the
rest of your Ring system.
Download the Ring app.
The app walks you
through setting up and
managing your Spotlight.
Your Bridge must be
up and running before
you set up your Motion
Sensor.
Search for “Ring” in one of
these app stores, or visit:
ring.com/app
Download from
Windows Store
To set up your
Bridge, follow
the instructions
in the Ring app
or user manual.
Insert the batteries.
Set up your Motion
Sensor in the Ring app.
In the app, tap
Set Up a Device.
Pull the tabs
on the back
outward
until you can
remove the
front of your
Motion Sensor.
Insert three
AAA batteries.
When prompted, select
Beams and follow the inapp instructions.
Once setup
is complete,
you can
reattach
the front of
your Motion
Sensor.
Doorbells
Security Cams
Chimes
Beams
Alarm
1. Install your
Motion Sensor.
Hold the base
against the
surface and
drive the two
mounting
screws.
Slide the base
down and remove
it from your
Motion Sensor.
Use the base as
a template to
mark the screw
locations.
Slide your
Motion Sensor
back onto its
base.
Your Motion Sensor detects motion
best when mounted 4-6 feet above
the ground.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interferenceto radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
ISED Statement
English: This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This d
evice must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas p
roduire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi
le brouillageest susceptible d'encompromettre le fonctionnement.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
Déclaration d'exposition aux radiations
Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non
contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre
corps.
For additional help, visit:
ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide +1 310 929 7085
For a list of all our customer
support numbers, visit:
ring.com/callus
To review your warranty coverage, please visit www.ring.com/
warranty.
Patents: www.ring.com/patents
© 2018 Ring LLC or its affiliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring
LLC or its affiliates.
Last updated: 09/19/18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Ring.com
Create Date                     : 2018:09:19 14:40:12+08:00
Modify Date                     : 2019:01:02 17:08:52+08:00
Subject                         : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Has XFA                         : No
Language                        : zh-CN
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Ring Video Doorbell Setup and Installation Guide
Creator                         : Ring.com
Description                     : For additional help, visit:.ring.com/help..For immediate assistance, we’re .available 7 days a week at:.Domestic: 1-800-656-1918 .International: +1 310-929-7085.help@ring.com
Metadata Date                   : 2019:01:02 17:08:52+08:00
Rating                          : 5
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:a0ad6a76-5c6c-48ff-b852-49b158728a4c
Original Document ID            : xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Document ID                     : xmp.id:be394dcb-b91c-400e-8e8e-f61e0949a7b0
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:21a49a8c-991b-4131-8259-3bc8a3a085c4
Derived From Document ID        : xmp.did:4662bad5-d63e-4a74-87ed-1233dfca46e4
Derived From Original Document ID: xmp.did:02a9e395-c84b-4e72-9f26-4b049bdfa2eb
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:09:19 14:40:12+08:00
Marked                          : True
Authors Position                : Setup and Installation Guide
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 7

EXIF Metadata provided by EXIF.tools