Ringway Tech A-10 DIGITAL PIANO User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2397615
Application ID	HinEds2DijygJg6Tc9IcRA==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	486.85kB (6085578 bits)
Date Submitted	2014-09-22 00:00:00
Date Available	2014-09-23 00:00:00
Creation Date	2014-09-19 15:50:47
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-09-19 15:50:47
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	鑴敋鑴曡劙鑴涙埉璺幗

Owner's Manual
Virgin Musxca‘ Instruments
Precaution
Thank you for purchasing this digital instrument.For perfect operation and security,please
readthe manual carefully and keep it for future reference.
Safety Precautions
CAUTION
RlSK or steam snout
no not open
The lightning flash with arrowhead symhol within an equilateral triangle is in
tended to alert the user to the presence ofuninsulated “dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk ofelectric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence ofiinportant operating and maintenaneetscryieing) instructions in
the literature accompanying the product.
Important Safety Instructions
1) Read these instructions,
2) Keep these instructions, . \
3) Heed all warning<.
4) Follow all inslnlctions, ,. ‘
5) Do not use this apparulus near water, i
5) clean only wilh dry cloth, (Figure 1)
7) Do not block any ventilation openings, install in accordance with the manufacturer s instructions,
a) Do not install near any heat sources such as radiators, lieat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or groundingrlype plug. A polarized plug has two hlades
“’lll’l one widel than the other. A grounding type plug has two blad
nd a third gioiindirig prong. The wide blade
or the third prong are prevtded for your safety, if the pmvldcd plug does not tit into your outlet consult an
electrician for replacement ofthe ohsolete outlcl,
10) Protect the power cord from being walked on or pinched particularly at plugs. convenience receptacles, and
the point where they exit from the apparatus.
ll) Only use attachments accessories specilied hy the manufactuiet.
12) Use only wllh the cart, stand, tripod, liiacket, or table specified by the manufacturer, or sold with the
apparatus, When a can is used, use caution when movtng the cart apparatus eomhlnation to avoid Injury from
tlprover (ngre l)
13) Unplug this appaiatus during lightning stonus or when unused for a long petiods to time.
14) Refer all servicing to qualified seiyice peisonnel, Selvicing is required when the apparatus has been dam
aged in any way, such as p0wcl'»supply cord or plug is damaged, llquld has heen spilled or chicets have fallen
into the apparatus, the apparatus has lteen exposed to rain or moisture, does not operate normally, or has been
dropped,
WARNING: To reduce the risk of fire at eleetiic shock, do not expose this apparatus to iain or moisture.
CAUTION' Apparanis shall not he exposed to dripping or splashing and no objects tilled with liquids, such
as vases, shall he placed on the apparatus.
Thank you for choosing the A-10 Digital Piano
Your A—10 is a high quality digital piano featuring an 88 note
hammer action, touch sensitive keyboard and the most advanced
PCM tone generation technology that combined will provide you with
a rich performing and playing experience You can also record your
own performances or record your own accompaniment to play along
to. The A-10 is more than great technology, your digital piano is
also a stylish piece of furniture that will look great anywhere in your
home. To get the most out ofyour instrument, please read this manual
thoroughly and try out the various functions as we take you through
them. We hope your new instrument will continue to entertain you for
many years to come
CONTENTS
PANEL CONTROL 2
CONNECTOR PANEL 3
1‘ Using USB-Midi ------ 3
2, Midi III/Out ........................... 3
3. Line In/Out
4. DC 12V Input-
5. Phones 1/Ph0nes 2 ................... 4
6‘ Pedal .................... 4
PANEL CONTROLS 5
1. Power On/Ofi‘ ...... 5
2. Adjust The Volume .................. 5
3. Adjusting The Sound ~>
4‘ Demo Play .................
5_ [SETUP] Button ..................... 6
6, LCD Display ........... . 6
7. [+/YES] & [-/NO] 6
VOICE & FUNCTIONS 7
1. Selecting AVOiCe ..................... 7
2‘ Layer Mode
3. Split Mode .....
4. Duet ......................................... 10
5. Reverb ~ ..11
6. Effects-- .. 11
7‘ Metronome ............................. 12
8.Tempo -- 12
SETUP 13
l. Reverb Type 13
2, Chorus Type ............................ 13
3‘ Rcvcrb chcl .. 14
4. Chorus Level .. 15
5. Main Volume ........................... 15
6. Split Volume ............................ 15
7, Layer Volume .......................... 16
8. Loandmory ~~16
9. Save Memory~~~~ ...17
10, Metro Type ............................ 17
11, Metro Volume ‘ .. 18
12, Split Point ----- ,. 18
13‘ Touch .................................... 19
14. Transpose ..19
15. Master Tune 20
16, Grading ------- 20
17, Local ..................................... 21
18chsct rrrrr “.21
RECORD 22
1, Recording ................................ 22
2. Playback ........................... 24
3. Recording Over The Tracks 25
PLAY ALONG SONGS -------------- 26
1. Selecting A Song ...................... 26
2. Listening To The Entire Song“ 26
3. Practicing The Right Hand Of The
Selected Song ......................... 27
4‘ Practicing The Left Hand Of The
Selected Song ......................... 27
5. Practicing Both Hands OfThe
Selected Song .......................... 27
MIDI FUNCTION 29
Local On/Off ------ 29
APPENDIX 30
1. Voice List 30
2. MIDI Implementation Chart 31
3‘ Factory Reset .......................... 32
4‘ Specifications .......................... 33
PANEL CONTROL
\/ \J , V,
j .r\ ,/\ ,/\, ,/\\
‘Al 509.: £sz 43mm 505.:
>53
CONNECTOR PANEL
The connector jacks are located on the rear panel of the piano.
Dc 12v
USBTONOST MIDIIN MIDI DUT PEDAL UNEIN LINEOUT ~+-
,/"\\ (/"\ f“. (Di ’ I W
x J t J K J \J ‘7 /
\W/ \,,/
1. Using USB-Midi
This product allows the transfer of MIDI information over USB to a computer. As
complicated this might sound, it's actually pretty straight forward Because your A-10
is USB Class Compliant, there is no need to install a driver to enable it to work with
computer running OSX, Windows XP, Vista or Windows 7. Simply just plug it in and
the OS will do the rest. The A-lO will work with all standard MIDI based computer
software.
2. Midi In/Out
The Piano provides MIDI IN and MIDI OUT ports. MIDI jacks allow communication
with other products equipped with MIDI interfaces.
3. Line In/Out
The audio output from other sound system connected to the LINE IN jack on the bottom
panel can be mixed with the sound of the unit This function is convenient when you
want to play along with a favourite song. The Line out jack can be used to deliver
the output of the piano to a keyboard amplifier, stereo sound system, mixing console
or tape recorder.
4. DC 12V Input
Connection for the included DC power adapteriPleaso use only the provided adapter
CONNECTOR PANEL
5.Phones 1/Phones 2
Two sets of standard stereo headphones can be plugged in here for private practice or
late-night playing‘ The internal speaker system is automatically shut off when a pair
of headphones is plugged into PHONES jacks,
e)
woNEsz
PHONESV
6.Pedal
Sustain Pedal
This digital piano can be used with the Sustain Pedal. It will cause piano key sounds
to decay slowly as if they were being held down. Apiano-style pedal may optionally
be used The jack will auto-detect the polarity of the sustain pedal.
N 0 TE
Ensure the piano is turned off before connecting the pedaL Otherwise, it will
affect the piano sound.
As standard, the pedal will affect the note playing after pressed. To change
polarity, hold the foot pedal down during power up.
PANEL CONTROLS
0 o
9 QQ a 9G)
80 0
1. Power On/Off
Tum the power on by pressing the [POWER] switch, the panel LCD display will light‘
% Greene emit-la
2. Adjust The Volume
Use [MASTER VOLUME] control to adjust the volume to your desired level‘
3. Adjusting The Sound
Use [TONE] control to adjust the sound of the piano,
4. Demo Play
The piano comes pre-progrannncd with a selection of sixteen demo songsl Each of the
demo songs is designed to demonstrate one of the instrument voices built into the
piano
To Start Demo Song Playback
Press the [DEMO] button to enter Demo Mode. The display will show DEMO, and
the Voice Select buttons will flash
owe
Press one of the Voice Select buttons to select a demo song‘ The selected demo will
play, and the corresponding Voice Select button will flash If the Variation button is
not lit, you will hear the Bank A voices (the top row ofvoices including Grand Piano,
E, Piano 1, Vibes, etc.).
PANEL CONTROLS
Ifyou want to hear demo songs featuring the Bank B voices (the bottom row ofvoices
including Bright Piano, ElPiano 2, FM EP, etcl), press the Variation button It will light
up‘While in Demo Mode, as long as the Variation button is lit, pressing a Voice Select
button will cause the demo song featuring that button's Bank B voice to play.
N 0 TE
When the selected demo song has finished playing, the next demo song
will play (following the order of the Voice Select buttons from left to right),
and its corresponding Voice Select button will flash.
When the last demo song ofBunkA has/inished playing, thefirst demo
song of Bank B will begin. When the final demo song of Bank B ends, the
first demo song of BankA will begin again. The Main voice will sychronous
change when demo changes.
Pressing the [DEMO] button at any point will stop playback and return A-lO to
Performance Mode, allowing you to play the piano normally again‘
5. LCD Display
The LCD will display the appropriate status, functionyalue, voice or the current mode
of operation,
6. [SETUP] Button
The SETUP button transfers the piano to Edit mode, enabling the modification of
the parameters of many features such as touch sensitivity, splits, layers and MIDI
control, among others,
7. [+/YES] & [- / NO]
Parameter adjusting buttonl
VOICE & FUNCTION
1. Selecting A Voice
Your instrument has 16 built-in voices, which include several pianos as well as other
instruments. These digitally-sampled musical instrument sounds may be selected one
at a time.
O O
we (want
m e
To select a voice, press the appropriate Voice Select button on the right side of the
front panel.
NOTE
NOTE: When [VARIATION] button is unlighted, you can press the
appropriate button to select the voice in the first line.
When I VARIA TION] button is lighted, you can press the appropriate
button to select the voice in the second line.
$5me EMS (CHEERSEMN
mm (m mmmms
VOICE & FUNCTION
2. Layer Mode
In Layer mode two voices may be played simultaneously, each at selected volumes,
To enter Layer mode, press [LAYER] button and the LED is flashing, then press the
voice button to select the second voice.
Eéé’i‘fiilfifig 55%
OO
rhfiéfi’éééh
Nsumx (How [Hummus
When [LAYER] button indicator LED is lit but not flashing, press the voice button to
select the MAIN voice,
Emma ‘p'lfil‘g riflfiéé’éiéfiu
OOO
H‘sszgd‘oalb rum: upmww; VANAHON
To adjust the volume of the Main voice and layer voice, please refer to [SETUP]
function, see pages 15 and 16,
Press [LAYER] button again to exit
3. Split Mode
Split Mode allows the keyboard to be divided into two sections so that different voices
may be played with the left and right hands.
The volume may be independently adjusted for each voice, the Split Point (the highest
VOICE & FUNCTION
note played with the left hand) may be adjusted and the Split Voice may be changed
as desired.
Enter Split Mode
Press the [SPLIT] button , The indicator is flashing‘The Split (left hand) voice will be
Upright Bass and the Split Point will be G2.
spur
Change the Split (left hand) voice
Press [SPLIT] button, the Split indicator is flashing, then press the voice select or
[+ / YES] / [- / NO] button to select the split voice.
ammo mmc ioucww
(32
mum“ Wm mukeuuxnm
\ 5mm (No x Maw": ms
Change the Main (right hand) voice
when [SPLIT] button indicator LED is lit but not flashing,thcn press the voice sclcct
or [+ /YES] / [- /NO] button to select the Main voice.
{new we Hum:
O I" rfi 'r' t':- T {3
mum oinm
mummy mm; upmawmx mmu
MAMA! (How mums:
VOICE & FUNCTION
Change the Split Point
Press the [SPLIT] button The LCD will momentarily display off , then hold down the
[SPLIT] button and press the appropriate piano key or use [+ / YES] / [- / NO] button
to Change the Split Point.
‘ HES mo
0r press [SETUP] button to change it,see page 18.
Setting the Split Voice Volume
Please refer to [SETUP] function, see page 15‘
Exit the Split Mode
Press [SPLIT] again, the Split indicator turns off and the Split mode is no longer active
4. Duet
Press the [DUET] button to select DUET mode. In this mode, the keyboard will be
separated into two playing areas.
Right: from C#3 to C7
Left: from A-l to C3
This will be very helpful when the instrument is used by two players at the same time
and they will be able to play the same piano sound in the same octave.
,— Right
+mmmmmm] WW]
|— Left—l
A4 (:0 er oz (:3 c4
VOICE & FUNCTION
Press [DUET] button again to exit the Twin mode.
While the DUET feature is selected using the optional 2 lever pedal, the pedals
automatically switch in a different configuration where there are 2 Sustain pedals, one
for the left and one for the right part of the keyboard.
5. Reverb
The [REVERB] button selects a number of digital reverb effects that you can use for
extra depth and expressive power, Press [REVERB] button to turn off or turn on the
reverb effect. When REVERE is turned on, press [REVERB] button 2 seconds, use
[+ / YES] / [- / NO] button to select reverb level,
FEVER
0r press [SETUP] button to select reverb type and level. Please see pages 13 and 14.
6. Effects
Shimmering, broadening effect. Press [EFFECTS] button to turn off or turn on the
CHORUS effect.
When EFFECTS is turned on, press [EFFECTS] button 2 seconds, use[+ / YES] /
[- / NO] button to select CHORUS level.
FIND F I FIND
mm C .. LEL'EL: 48
Or press [SETUP] button to select chorus type and level. Please see pages 13 and 15
VOICE & FUNCTION
7. Metronome
Metronome is a convenient feature for practice, and it can also provide a solid
rhythmic guide when recording.
Press [METRONOME] button can turn off or tum on the Metronome effect When
Metronome is turned on,press [METRONOME] button 2 seconds, use [+ / YES] /
[- / NO]button to select Metronome volume (0-127) .
AA$
Or press [SETUP] button to select Metronome type and volume. Please see page 17.
8. Tempo
This function allows you to set the tempo by [TEMPO] button,
Press [TEMPO] button to turn off or turn on the TEMPO effect
Press [TEMPO] button, the indicator is lit, use [+ / YES] / [- / NO] button to change
the tempo value range from 20 to 280 BPM (beats per minute)
SETUP
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select the function ‘ Press [+/Y ES] button into the option, use [+/Y ES] / [-/NO]
button to set the parameters
The option and the parameters are as the follows:
1. Reverb Type
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO] button
to select [R,TYPE'?], Press [+/Y ES] button into the option,the LCD will display:
RiTYPE: ROOMSA
SETUP
Then use [+/Y ES] / [-/NO] button to set the parameter (Default: ROOM3)‘
The LCD will indicate these parameters as shown below:
R.TYPE: HALLl
RiTYPE: HALL2
R.TYPE: ROOMl
R.TYPE: ROOMZ
R.TYPE: ROOMS
R,TYPE: STAGEl
R,TYPE: STAGEZ
R,TYPE: PLATE
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
2. Chorus Type
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [C.TYPE?]. Press [+/Y ES] buttoninto the option,the LCD will display:
R,TYPE: CHORUSS.
SETUP
SETUP
Then use [+/Y ES] / [-/NO] button to set the parameter (Default: CHORUS3).
The LCD will indicate these parameters as shown below:
C.TYPE: CHORUSl
C,TYPE: CHORUSZ
C,TYPE: CHORUS3
C,TYPE: CHORUS4
C,TYPE: CELESTEl
CTYPE: CELESTE2
C.TYPE: CELESTE3
C,TYPE: CELESTE4
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
3. Reverb Level
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select [RLEVEL‘I]. Press [+/YES] button into the option, the LCD will
display:R.LEVEL: 72‘
SETUP
Then use [+/YES]/[—/N0]button adjust the rcvcrb lcvcliRangc: 00-127 (Default: 72)
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
SETUP
4. Chorus Level
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select [CLEVEL‘I]. Press [+/YES] button into the option, the LCD will
display: CLEVEL: 64‘
- I ' P I FINE!
'L. ' i54-
SETUP
Then use [+/YES] / [-/NO] button to adjust the CHORUS level, Range: 00-127
(Default: 64).
5. Main Volume
Press [SETUP] button to enter the filnction menu, Use [SETUP] button or [-/NO]
button to select [MAINVOL‘P] Press [+/YES] button into the option, the LCD will
display: MAINVOL: 127.
SETUP
Then use [+/Y ES] / [-/N0]button to adjust the MAINVOL Range: 00-127
(Default: 127).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value.
6. Split Volume
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [SPLITVOL?]. Press [+/Y ES] button into the option,the LCD will
display: SPLlTVOL: 127,
SETUP
Then use [+/YES] / [-/NO] button to adjust the SPLITVOL Range: 00-127:
(Default: 127).
Press [+/YES] & [-/NO] buttons simultaneously to restore the default value,
7. Layer Volume
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select [.LAYERVOL‘2]. Press [+/Y ES ]button into the option,the LCD
will display: LAYERVOL: 100,
Then use [+/YES] / [-/NO]button to adjust the LAYERVOL Range: 00-127.
(Default: 100).
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
8. Load Memory
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select [LOADMEM'?]. Press [+/YES] button into the option, the LCD will
displayzLOADMEM: 1?: Then press [SETUP] button to adjust the load memory
Rangezl7~87 (Default: 1?). Use [+/YES] button to confirm LOADMEM: lDONE.
ERHHD 53"?i‘ilIJ
LDHDPIEP‘I: Zl '?
SETUP
The parameters in the LOADMEN mode are as follows:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:09:19 15:50:47+08:00
Modify Date                     : 2014:09:19 15:50:47+08:00
Metadata Date                   : 2014:09:19 15:50:43+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:8F3231A8D13FE411B486973CEE7343BF
Instance ID                     : uuid:c3e5965d-59f8-46b6-9626-b3aece68c50a
Derived From Instance ID        : uuid:552f644e-9fee-464b-aca3-7884f587dbd5
Derived From Document ID        : uuid:D1642CFDD03FE4118228C7DC1D4A82DF
Format                          : application/postscript
Creator                         : 鑴敋鑴曡劙鑴涙埉璺幗
Title                           : A-10鑴瀯鑴﹁剾鑴ｇ鑴欐鑴㈣寘.cdr
Page Count                      : 19
Author                          : 鑴敋鑴曡劙鑴涙埉璺幗

EXIF Metadata provided by EXIF.tools