Ringway Tech A-10 DIGITAL PIANO User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2397616
Application ID	HinEds2DijygJg6Tc9IcRA==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	433.07kB (5413408 bits)
Date Submitted	2014-09-22 00:00:00
Date Available	2014-09-23 00:00:00
Creation Date	2014-09-19 15:51:48
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-09-19 15:51:48
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	鑴敋鑴曡劙鑴涙埉璺幗

SETUP
Mainstone
Splitstone
Laytone
Tempo
Tune
Touch
Splitpoint
Mainvol
Splitvol
Layervol
Reverb
Reverbvol
Chorus
Chorusvol
Transpo s
Metrovol
9. Save Memory
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [SAVEMEMC’], Press [+/YES] button into the option, the LCD will
display: SAVEMEM: 1?, Then press [SETUP] button to adjust the SAVEMEM Range:
1?~8? (Default: 1?) Use [+/Y ES] button to confirm SAVEMEM: IDONET
SETUP
The parameters in the SAVEMEN mode are as follows:
ERFIND ;
SHUEHEP’
Mainstone Splitstonc
Laytone Tempo
Tune Touch
Splitpoint Mainvol
Splitvol Layervol
Reverb Reverbvol
Chorus Chorusvol
Transpos Metrovol
10. Metro Type
Press [SETUP] button to enter the function menui Use [SETUP] button or [-/NO]
button to select [METROTYPE?]. Press [+/YES] button into the option, the LCD
will display: METROTYPE: 4/4.
SETUP
gfi
Then use [+/YES] / [-/NO] button to set the parameter: 2/2\ 2/4 t 3/4 t 4/4 t 5/4\
6/8 t 7/8\ 9/8 t 12/8 (Default: 4/4)r
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
11. Metro Volume
Press [SETUP] button to enter the function menurUse [SETUP] button or [-/NO]
button to select [METROVOL‘I]. Press [+/Y ES] button into the option,the LCD will
display: METROVOL: 75.
SETUP
Then use [+/YES] / [-/NO]button to adjust the METROVOL Range: 00-127 (Default: 75):
Press [+/YES] & [-/N0] buttons simultaneously to restore the default value:
12. Split Point
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [SPLITPOTNT?]. Press [+/Y ES] button into the option, the LCD will
display: SPLlTPOlNT: 35
SETUP
Then use [+/YES]/[-/NO] button to adjust the SPLITPOINT Range: 01-88 (Default: 35).
Press [+/YES] & [-/N0] buttons simultaneously to restore the default value.
SETUP
13. Touch
Press [SETUP] button to enter the function menu, Use [SETUP] button or [-/NO]
button to select [TOUCl-l‘?] Press [+/YES] button into the option, the LCD will display:
TOUCH: NORMAL.
SETUP
Then use [+/YES] / [-/NO] button to set the parameter as shown below:
HARD
NORMAL
SOFT
HX?
If you choose TOUCH: FIX?, Press [SETUP] button to enter the option, then use
[+/YES] / [-/N0] button to set the parameter: 0~127 (Default: 100),
ERFIND |=‘IFINIII
TCIIJEZHI- .[ X: lliilii
14. Transpose
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [TRANSPOSFR] Press [+/YES] button into the option, the LCD will
display: TRANSPOSE: -0-.
Then use [+/YES] / [-/NO] button to adjust the TRANSPOSE Range: -12 N +12
(Default: 0).
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
SETUP
15. Master Tune
The pitch of this piano is very accurate and stable, it is automatically set to standard
A440 pitch when the piano is turned on, The tuning feature makes it possible to tune
the pitch of the instrument in fine intervals, If necessary, you can alter the piano pitch.
Tuning can be accomplished over -64 to +63 scmitonc steps, or cents
1). Press the [SETUP] button until the “Mastertune” menu appears.
2). Press [+/Y ES] button into the option,the LCD will display: MASTERTUNE: -0—.
Then use the [+/Y ES] button to increase the value or the [-/NO] buttons to decrease
the valuci Press the [+/YES]/[-/NO] buttons simultaneously to recover the default
setting of 00.
To Exit the SETUP Mode press the [SETUP] button again or it will exit from SETUP
mode automatically 5 seconds after it has been engaged.
16. Grading
When this function is engaged, after playing play-along songs, it will give you grading
automatically according to your performance There are 4 levels of the grading:
Excellent, Very good, Good and Try Again.
1). Press the [SETUP] button until the “Vocal Grading ” menu appears.
2). Press [+/YES] button into the option, the LCD will display: **GRADING
ON**i Then use the [+/YES] / [ -/NO] buttons to select on or off
ERHHD PIHHU
w [EEEFEDIHE on M:
SETUP
SETUP
The Default setting is Vocal Grading On
To Exit the SETUP Mode press the [SETUP] button again or it will exit from set
upmode automatically 5 seconds after it has been engaged.
17.L0cal
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [LOCAL ‘2]. Press [+/YES] button into the option,the LCD will
display: ***LOCAL ON***,
Then use [-/NO] button to mute the local soundThe LCD will display:
***LOCAL OFF** (Default: ON)A
Press [+/Y ES] & [-/NO] buttons simultaneously to restore the default value.
l8.Reset
Press [SETUP] button to enter the function menu. Use [SETUP] button or [-/NO]
button to select [RESETC’], Press [+/YES] button into the option, the LCD will
displayzRESETlNGi The piano return to the factory setting.
tic-mun FIFINEI
$$$ _ ETINE **$
SETUP
RECORD
The recording function features a two track recorder that lets you record what you play
on the keyboard and then play it back. Two tracks mean that you can “overdub” one
part on top of another, using a different voice if you like.
TRACK l
mm
The recorder feature is a useful addition to any keyboard study program since it lets
you hear exactly how you sound from the listener's perspective. It can also be just
mv/
mom) 5,0,,
plain fun, This recorded information is nonvolatile and therefore will not be lost when
the power is tumed off. The 2 tracks can playback separately or together as a complete
song, The record function records all settings exactly as you selected and performed
them,
1. Recording
1). Prepare to record by setting the voice, tempo, reverb level, or other parameters as
desired,
2) Select a track: There are two tracks available for recording, The tracks are assigned
by engaging the [TRACK l] or [TRACK 2] buttons.
rmcx r
YRAtK
Press and hold down the [RECORD] button, then press the track button that you want
to record in, The corresponding track indicator and the REC indicator will blink, and
the four dots of the beat indicator will blink with the current tempo to show that the
recorder is on standby,
RECORD
N 0 TE
1. The contents of a track will be erased as soon you select that track for
recording.
2. If you already have recorded on the other track, its track indicator will
also be lit and the recorded music will play as a reference for you while
you record the new track. If you do not wish for the previously recorded
track to play while you are recording, press the corresponding track button
to turn the indicator light off
3). Metronome: Press the [METRONOME] button to enable the metronome as a
reference, if so desired. The four beat indicators flash, the metronome sounds without
any beat pattern. just giving the tempo. You can adjust the metronome‘s beat pattern
and tempo as usual before recording. However, these cannot be changed during
recording.
N 0 TE
The metronome sound will not be recorded.Note2: If one track has been
recorded, when recording another track, its tempo and beat pattern will
follow the setting of the/irst track recorded. If you change the tempo
now, the new tempo will be applied for both tracks. Cannot change the
heat pattern.
4), Record: If the [TRACK 1] or [TRACK 2] buttons are selected and blinking, the
recording will begin as soon as you play the keyboard or press the [PLAY/STOP]
button. Whilc rccording, thc rccording track indicator keeps blinking and the
[RECORD] indicator it lit solid.
RECORD
5), Stop Recording-Press the [PLAY/STOP] button, the [RECORD] button or the
recording track button to stop recording The record indicator turns off and the
recorded track indicator is lit to show the track now contains data.
NOTE
When the record memory is full, recording will stop automatically and
“ F UL " will appear on the LED display.
2. Playback
l) The Track LED indicators will show which tracks contain recorded data, If you do
not wish to hear one of the two Tracks, press the corresponding TRACK button to
tum that track off. Its LED indicator will turn off.
mum
TRACK 2
2), Press the [PLAY/STOP] button to hear the recorded track(s)t The PLAY indicator
lights up and the beat indicators will flash per the beat pattern and temper
You can change the tempo ofyour recorded track by pressing the [TEMPO] button
while the recording is being played back. You may also accompany the recorded tracks
on the keyboard While the recording is playing back,
N 0 TE
If the metronome is turned on before pressing the [PLA Y/STOP/ button to
play back the recorded music, the metronome will sound with proper tempo
and beutputtern which performed during your recording.
RECORD
3). Press the [PLAY/STOP] button to stop the playback,
mom
Playback will also stop automatically when the recording reaches its end.
In step 2, you can change the tempo of tie track that is playing back temporarily. You
could also change the tempo for the recorded tracks permanently:
- Adjust the new tempo value
' Hold the REC button and press the [PLAY/STOP] button
Tracks will playback at the new tempo and this tempo will be set for the tracks. Beat
pattern cannot be changed.
3. Recording over the tracks
To erase the music recorded on the tracks, just record over the track you want to erase,
PLAY ALONG SONGS
There are 55 songs built into this Piano for your musical enjoyment, These songs have
separate left and right-hand parts that can be turned on and off as required so you can
practice the corresponding part on the piano.
1. Selecting A Song
Turn on the song mode by pressing both the [LEFT HAND] and [RIGHT HAND] buttons
simultaneously The song number will appear on the LCD displays Both Right and
Left indicator are OFF,
Use the [ - /NO] / [ +/YES] button to select a song
Press the [PLAY/STOP] button to start the song.
If you want to play slower or faster than the preset tempo, press the [TEMPO] button
and use the [ - /NO] / [ +/YES] button to set the tempo based on the original tempo
of the songs The range is 20 to 280 BPM (beats per minute),
Press the [ , /NO] & [ +/Y ES] buttons simultaneously to recall the default Tempo
for the selected song,
2. Listening To The Entire Song
1). With the play along song mode engaged, press the [PLAY/STOP] button to hear
both hand parts playing the entire song.
mu 3 ,
2) Press the [PLAY/STOP] button again to stop‘ Otherwise,
playback will stop automatically at the end of the song.
PLAY ALONG SONGS
3. Practicing The Right Hand Of The Selected Song
1), With the play along song mode engaged, press the [RIGHT] button to mute the
right hand part The right indicator lights up
2). Press the [PLAY/STOP] button. Its indicator lights up and you will hear the
metronome “count in” the song. You will then hear the left-hand part
NOTE
The default status of the metronome is ON. Press the ME TRONOME button
if you want to disable the metronome sound in the right/ Left hand made.
But, in the both hands mode, it cannot be turned (11}?
3). Play the right-hand part ofyour selected song While the left»hand part plays.
4), Press the [PLAY/STOP] button again to stop. Otherwise, playback will stop
automatically at the end of the song
4. Practicing The Left Hand Of The Selected Song
Follow steps 1-5 listed above, substituting the LEFT button whenever RlGHT button
is mentioned You will hear the right-hand part of your selected songl Play the
left-hand part of your selected song while the right-hand part plays
5. Practicing The Both Hand Of The Selected Song
1) While the play along song mode is engaged, press the [RIGHT] and [LEFT] buttons
simultaneously.
PLAY ALONG SONGS
2) Press the [LEFT] button first, then the [RIGHT] button
3). Press the [PLAY/STOP] button, lts indicator lights up and you will hear the
metronome “ count in” the song,
4) Play the left-hand and right-hand parts of your selected song The metronome will
continue to play to assist you in keeping timer
5). Press the [PLAY/STOP] button again to stop, Otherwise, playback will stop
automatically at the end of the song.
MIDI FUNCTION
If you are an advanced MIDI user, this section will help you to access the MIDI
controller capabilities of the A-lO. If you already know that you need this specialized
functionality, then this section is for you, However, this information is not necessary
in order to enjoy playing the piano, A good rule to keep in mind is: Ifyou don't know
what a function described in this section is, then you probably don't need it,
MIDI, or Musical Instrument Digital Interface, is the way most electronic keyboards
communicate with computers and with each other. Through a series of MIDI messages
a computer or keyboard can tell an instrument What note to play, how loud to play it,
when to stop playing it, and a host of other information
The A-10 can send MIDI information to a computer or another MIDI-capable
instrument, Via its MIDI or USB output. This enables theA-lO to act as a controller
keyboard for another instrument, MIDI sequencer or MIDI enabled Digital Audio
Workstation program,
Local On/Off
Turning the Local On/Off function to off will disconnect the keyboard from the
internal sound engine ofthe A-lO. This means you can use the A-lO as a MIDI
controller to control other MIDI devices (or Virtual instrument software running on
your computer) without playing the internal sounds of the A-lOI You may also find
other occasions (such as when you are using MIDI sequencing software on your
computer) where it is useful to turn Local off
Turn Local On/Off to Off
Plese refer to [SETUP] function, see page 21.
Turn Local On/Off to On
Plese refer to [SETUP] function, see page 21‘
APPENDIX
1. Voice List
No TONE
01 Acoustic Grand Piano
02 Bright Acoustic Piano
03 Electric piano 1
04 Electric Piano 2
05 VIBES
06 FM E.P|ANO
07 Rock Organ
08 Church Organ
09 Harpsichord
10 N.GU|TAR
1 1 Strings
12 Choir
13 Fantasia
14 Warmpad
15 Upright Bass
16
Electric Bass
APPENDIX
2. MIDI Implementation Chart
Function Transmitted Recognized Remarks
Basil: Detautt 1-16 1716
cnannei Changed 1715 1-16
Mode Detauu Mode 3 Mode 3
Messages 0 x
Mam, x
Note True votoe 0-127 0-127
Number
Velocity ON 0 0
Note OFF 0 0
After Key‘s x x
Touch Touen cnanne1 x x
Pitch Bend x x
Control cnange 07127 01,561,10‘11,
316416166167,
30511913311001
101,121
Program 07127 045 ‘16 sounds un1y
Change Trued PGM:0715
5’5"“ 5mm" 0' 0‘ ‘Tne contruHerwIH rewgntze
and respond to GM Device
Inqumes
MasterTune supported
MasterVomme supported.
System Song Posin'on Pmmer x x
Common Song Se1ect x x
Tune Request x x
System mock x x
Real Time Commands x x
Aux NI Sounds 011' o 0
Messages Reset An ControHers o o
Loom ON/OFF‘ o 0
ALL thes OFF 0 0
Active Sensmg x 0
System Reset x 0
Notes
Model:OMNI ON,POLY ModeZ:OMNION,MONO 0: Yes
Mode3:OMNI OFF,POLY Mode4:OMNIOFF,MONO X: NO
CID
APPENDIX
3. Factory Reset
1). Turn offthe power.
POWER/
STANDBY
2). Hold down [+/YES] & [—/NO] buttons, then turn the power on, it can restore all
internal settings to factory sets
PDWER/
WE; / mNDav
APPENDIX
4. Specifications
Keyboard:
88 Notes Graded Hammer Action
Display:
LCD Display
Voice:
14
Polyphony:
64
Voice Function:
Layer, Touch, Transpose, Split,
Metro, Duet
Pedals:
Sustain
Effect:
Reverb, Chorus
Demo Song:
16
Song Recording:
Record two individual tracks
Midi:
Transmit Settings
Local Control
USB MIDI
Connectors:
MIDI Out, MIDI In, Pedal, Line Out,
Line in , Phones, USB to Host
Speaker:
WR05016-RX2
YDQG32-8C-4N18CX 2
Power Output:
15W X 2
Dimensions(W x D x H)
l400mm><327mm>< 747mm
Weight:
32Kg
Supplied Accessories:
Owner's Manual,
Sustain Pedal, Music Rack,
A/C Adapter
FCC STATEMENT
1. This device complies with Part 15 ofthe FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 ofthc FCC Rules These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receivers
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected,
Consult the dealer or an experienced radio/TV technician for help,
Wtesia
Virgin Musical Instrument Company INC
P O Box 2908
La Mesa, CA 91943
PH: 619 244-0006
E-mail: info@virginmusicalinstruments.com
Virginmusica|instrumentscompany.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2014:09:19 15:51:48+08:00
Modify Date                     : 2014:09:19 15:51:48+08:00
Metadata Date                   : 2014:09:19 15:51:41+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:A75852CBD13FE41191B1AC8276840249
Instance ID                     : uuid:46860ce6-88ab-4444-8699-209a2e236d9a
Derived From Instance ID        : uuid:56695a3f-9aaa-4878-ad42-268a0c485f5f
Derived From Document ID        : uuid:D1642CFDD03FE4118228C7DC1D4A82DF
Format                          : application/postscript
Creator                         : 鑴敋鑴曡劙鑴涙埉璺幗
Title                           : A-10鑴瀯鑴﹁剾鑴ｇ鑴欐鑴㈣寘.cdr
Page Count                      : 19
Author                          : 鑴敋鑴曡劙鑴涙埉璺幗

EXIF Metadata provided by EXIF.tools