Ringway Tech RP8810 DIGITAL PIANO User Manual RP8810 03

Download:
Mirror Download [FCC.gov]
Document ID	2315795
Application ID	YGSXCpPfd32PFzK+U2xwaQ==
Document Description	Users Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	461.04kB (5762993 bits)
Date Submitted	2014-07-03 00:00:00
Date Available	2014-07-04 00:00:00
Creation Date	2014-07-02 09:08:18
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2014-07-02 09:08:18
Document Title	RP8810 03.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Function
Local
Using this function, you canturn of the keyboard’s internal sound generator, but still
have the MIDI data being sent out
In “Fund?" function, press the [ENTER] button to confirm, and use [+] and [-]
buttons or the [DATA CONTROL] knob to select ” Local 7”
/ "" m
3% W"
Press the [ENTER] button to confirm, and then use [+] and H buttons or then [DATA
CONTROL] knob to select “Local On” or “Local Off” ,
I fit” ::. 1
I— -\._- -\..- 5.: a.
E” E
Local on ------ Normal operation. Keyboard and Controllers are sent to
the Sound Engine Keyboard plays normally‘
Local off ------ There will be no sound produced by the keyboard’s own
tone generation system. MIDI function will continue to work as usual.
Transpose
This function allows you to change the key of the instrument in semitone steps,
The keyboard can be transposed up to a maximum of 12 semitones up or down
(a maximum of one octave up or down).
Press the [FUNCTION] button to select “Peri?” I
Function
/T “" Pent". 7'
Press the [ENTER] button to confirm, in order to select “Trans?” i
’ul ._Fi
Press the [ENTER] button to confirm, and use +] and H buttons or the
[DATA CONTROL] knob to set the Transpose Valuer
m 1111' 'I""
\ uu ..._
Tune
This function makes it possible to tune the pitch of your instrument to match other
instruments which deviate from standard pitch. One of the benefits of owning a digital
instrument, is that the tuning is set at the time of design and never needs adjustment.
Afll40Hz is the default setting.
In “Perm” function, press the [ENTER] button and use the [+] and H buttons or
the [DATA CONTROL] knob to select “Tune?” ‘
/ m '- :.-:=
xii m IurtE. ;
"m WEE
Function
Press [ENTER] button to confirm, and then use [+] and H buttons or the [DATA
CONTROL] knob to set the tune value. Range “-64~63” .
iii:
:3
c:
a:
~5—
Pan
In this function you can set the left / right position of each orchestration part to create
a broad stereo image of your sound.
In “Perf?” function, press the [ENTER] button, and use [+] and [-] buttons or
the [DATA CONTROL] knob to select “MtPan?” or “S.Pan? 7’ or “DiPan?”
$3 ""3
M ‘Pan7- -Main Voicc Pan
S. Pan? -------- Split Voice Pan
D, Pan? ------- Dual Voice Pan
Press the [ENTER] button to confirm, and use the [+] and H buttons or the [DATA
CONTROL] knob to set the pan value: From -64 (Left) to 63 (Right).
in Him .
K m uv====----
“ :E‘i
Function
Octave
In this function you can set the Main Voice Octave, the Dual Voice Octave and the
Split Voice Octave,
In “Peri?” function, press the [ENTER] button, and use [+] and H buttons or
the [DATA CONTROL] knob to select “MiOct?” , “Si Oct?” and “D Oct?” i
hi. r'1 -4 F.
l'ln l..||..-|.- :' 7
M.Oet? ------- Main Voice Octave
S.Oct? ------ Split Voice Octave
D‘Oct‘?" --Dua1 Voice Octave
Press the [ENTER] button to confirm, and use [+] and [-] buttons or [DATA
CONTROL] knob to set thc oetavc value: -2, -1i 0, +1, +2i
(7 M: Ei'l'i.. flat-aye
71 mm [ELI SEE
Using this function you can adjust the Main Voice Volume, Split Voice Volume and
Dual Voice Volume
In “Peri?” function, press the [ENTER] button and use the [+] and H buttons or
the [DATA CONTROL] knob to select “Mo Vol?” , “S. Vol?" or “D V01?" .
K“ m m I l.--.1! m”.-
\fi W . u
"m [EVE
M .Vol? ------- Main Voice Volume
Volume
S, Vol? ------ Split Voice Volume
Do Vol? ----- Dual Voice Volume
Function
Press the [ENTER] button to confirm, and use the [+] and H buttons or the [DATA
CONTROL] knob to set the volume value: 00 to 127.
C’ m: Iflfli'l‘..ii-::-1Llrjie
‘ mm [2‘4 EE
Reverb
This function allows you to add reverb to the overall sound, thereby adding a spatial
effect similar to natural room spaces, such as Ha 1, Stage, Room ctc, Etc,
Press [FUNCTl/QN] button to select ”Effect?"
/ :5 w.
¥, m
Press [ENTER] button to confirm, and use the [+] and [-] buttons or the [DATA
CONTROL] knob to select “Reverb?”
/§: > mi
\, mum
Press the [ENTER] button to confirm, and use the [+] and [-] buttons or [DATA
CONTROL] knob to select reverb type. No reverb is produced when you select 'OFF',
and the indicator will be invisible in the LCD display. Default type: 05Room3
The reverb types in the list below can be selected "mm the reverb display.
E'Si
_I..
.n.
l 2 3 4 5 6 7 8
Hall] HallZ Rooml RoomZ Room3 Stagel StageZ Plate
Function
Chorus
In “Effects?” function, press the [ENTER] button and use the [+] anc [-] buttons or
the [DATA CONTROL] knob to select “Chorus?”
Char-LIE
W E
Press the [ENTER] button to confirm, and use the[+] and [-] buttons or the [DATA
CONTROL] knob to select Chorus type‘
No Chorus is produced when you select “00 ChorsOfi" Default type: Off
ED iZl'Ich'-E.i:if
W E
Thc chorus typcs in the list bclow can bc sclcctcd from thc chorus display.
I 2 3 4 5 6 7 8
Chorusl ChorusZ Choru53 Chorus4 Feedback Flangerl Flangerl ShrtDth
Reverb and Chorus Depth
In this function you can adjust the Reverb and Chorus depth for the selected voice.
In “Effects?” function, press the [ENTER] button and use the [+] and [-] buttons or
the [DATA CONTROL] knob to select “Mr Rcho?" , “Sr Rcho?" , “Dr Rcho?”
“Mr ChrVo?” , “Sr ChrVo?” and “Dr ChrVo?”
Egg
Function
M. ReVVo? ------ Main Voice Reverb Depth
S. ReVVo? ------ Split Voice Reverb Depth
D. Rcho'? ------ Dual Voice Rcvcrb Dcpth
M. ChrVo? ------ Main Voice Chorus Depth
S. ChrVo?- ---- Split Voice Chorus Depth
D. ChrVo‘? --- Dual Voice Chorus Depth
Press the [ENTER] button to confirm, and use the [+] and [-] buttons or the [DATA
CONTROL] knob to select Reverb depth and Chorus depth. Rangez00~63
MIDI In
MIDI IN----Receiving MIDI data from another MIDI device.
Press [FUNCTION] button to select “ Midi? ”
e2
jig.
[H] 9
Press the [ENTER] button to confirm to select “MidinO 1?” Turn the [DATA CONTROL]
knob or use the [+]and[-] button to select the tracks (01~16).
Function
Press the [ENTER] button to confirm, and use the [+] and [-] buttons or DATA CONTROL]
knob to turnthis track on or off ‘
:fi
MIDI Main/Left/Dual
In “Midi?" function, press the [ENTER] button and use the [+] and [-] buttons or
the [DATA CONTROL] knob to select “MidMain?” , “MidLeft?” or “MidDual?”
/ W?" 7'1 i dfiezai '.
mm :34 EE
Press the [ENTER] button to confirm, and use the [+] and H buttons or the [DATA
CONTROL] knob to select trackt
Auto Accompaniment
—
Your instrument has 187 accompaniment styles which can be used to provide a
F ully-orchestrated Auto Accompaniment, When the Auto Accompaniment
function is turned on, this instrument creates fully-orchestrated rhythm, bass
and chord accompaniment based on chords you play with the left hand in the
Auto Accompaniment section of the keyboard (i.e. all keys to the left of the Auto
Accompaniment split point)‘ The right-hand section of the keyboard is available
for normal playing.
Auto Accompaniment
The default Auto Accompaniment split _
point is the F2 key‘ The Auto =lll
Accompaniment section of the keyboard
Consists of all keys to the lefi of the split
point
menxhrl mp ".mm
Selecting a Style
Press the [VOICE/STYLE] button, the button is illuminated, the Style mode
selection is active and the current Style name and number will be displayed
on the LCD,
Our 1" IDEN-
‘ u IUIJL-
.n .
VOtCE/ m“ ”-7” ‘
STYLE M
Use the [+] and [-] buttons or the [DATA CONTROL] knob to select the desired Style
‘\ mm
, ,/ m
- nmmm
Auto Accompaniment
When [VOICE/STYLE] button is illuminated, you can use the Direct Select Button to
select a style
“"7 35 Beam" “‘3':
|-..--\.. I
m 55 E
The name below the Direct Select Button is the style name.
Starting a Style
Press the [START/STOP] button to start the sty e,
/ rm
\7 mum
START Mum
STOP m
Press the [START/STOP] button again to stop the accompaniment.
Chord Button
Press the [CHORD] button to activate the chord function The left hand section
ofthe keyboard becomes the Auto Accompaniment section, and chords played
in this section are automatically detected and used as a basis for fully automatic
accompaniment in the selected style

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2014:07:02 09:08:18+08:00
Create Date                     : 2014:07:02 09:08:18+08:00
Format                          : application/pdf
Title                           : RP8810 03.pdf
Creator                         : Administrator
Document ID                     : uuid:31a123c1-4da5-4460-bcd1-770eb03cc9cd
Instance ID                     : uuid:2e23247f-7326-4d4a-9c71-1a5f05319bcd
Page Count                      : 10
Author                          : Administrator

EXIF Metadata provided by EXIF.tools