Rising Digital SECD-10IA-03 SECD-10IA-03 Display Screen User Manual

Shanghai Rising Digital Co.,Ltd. SECD-10IA-03 (S) Display Screen

User Manual

SECD‐10IA‐03User'sManual|ShanghaiRisingDigitalCo.,Ltd.SECD‐10IA‐03User'sManualV1.0
SECD‐10IA‐03User'sManual|ShanghaiRisingDigitalCo.,Ltd.SummaryAs a vehicle mounted display, SECD-10IA-03 can meet human-machine interaction, wireless communication and positioning, body control, video surveillance and other requirements under construction machinery, special machinery and other harsh conditions.
SECD‐10IA‐03User'sManual|ShanghaiRisingDigitalCo.,Ltd.DirectoriesFunctionandcharacteristics......................................................................................11、 Integrationofdisplay,communication,controlandvideosurveillance.................12、pecialconfigurationprogramdevelopmentenvironment......................................13、 Adapttotheharshenvironment................................................................................14、SeamlessconnectionwithRisingremotemonitoringsystem.................................1Externalinterfacefunctiondescription........................................................................21、 Externalcharacteristics..............................................................................................22、 34pinconnectorportdefinition................................................................................2Installationofwiring..............................................................................................................31、 size................................................................................................................................32、 Installationmethod....................................................................................................3Descriptionofproductparametersandenvironmentalindicators..............................3 Three:developmentanddebugging.....................................................................................51、hardwaredevelopmentplatform................................................................................52.、softwaredevelopmentenvironment.........................................................................5 Appendix........................................................................................................................6
SECD‐10IA‐03User'sManual1|ShanghaiRisingDigitalCo.,Ltd. Function and characteristics 1、 Integrationofdisplay,communication,controlandvideosurveillanceShow: 10.4 inch, resolution 600x800, industrial TFT LCD screen, resistancetouch controlCommunication:：upport GPRS wireless communication, support GPS positioning，Support CAN communication, 2 channel, compatible J1939/CANOpen/CAN2.0Bprotocolcontrol：2 AI_V (or AI_I), 2 Road AI_R, 2 Road TI, 4 road PWM (reusable DO）Video：Support 4, 4 single camera, segmentation, picture in picture display mode,NTSC/PAL self recognition2、 pecialconfigurationprogramdevelopmentenvironmentMan-machine interface: the DGUS configuration software is used to integrate the common interface display controls. Control communication: integration of LM Studio integrated development environment to integrate common functional blocks 3、 AdapttotheharshenvironmentCan be used in cold and hot environment: -25 degree at lowtemperature, 65 degree high temperature Anti - back design of power supply, more than 37V self protection,prevent burning Strong vibration, dusty rain, lightning and other environment forfield operation 4、 SeamlessconnectionwithRisingremotemonitoringsystemSupporttheremoteunlockingmachinetofacilitatethemanagementofcreditor'srights
SECD‐10IA‐03User'sManual2|ShanghaiRisingDigitalCo.,Ltd. External interface function description 1、 Externalcharacteristics2、 34pinconnectorportdefinitionorder name function remark 1 CAN2_HCANHigh2 TI23 RSreset4 +12VOUT12Vouput5 CAN1_LCANLow6 CAN1_HCANHigh7 CAMRA2_V‐ CameranegativeofChannel28 GND9 +5VOUT5Vouput10 CAN2_LCANLow11 T1112 +12VOUT13 CAMRA1_V+ CamerapositiveofChannel114 CAMRA1_V‐CameranegativeofChannel115 CAMRA2_V+ CamerapositiveofChannel116 CAMRA3_V‐CameranegativeofChannel517 SMI18 AI_R119 AI_120 AI_221 CAMRA4_V+CamerapositiveofChannel422 CAMRA4_V‐ CameranegativeofChannel423 CAMRA3_V+CamerapositiveofChannel324 GNDGNDPin connector
SECD‐10IA‐03User'sManual3|ShanghaiRisingDigitalCo.,Ltd.25 24VinPowerinputrange：12～36VDC 26 AI_R_227 PWM3Pwmoutput28 PWM4Pwmoutput29 PWM1Pwmoutput30 PWM2 Pwmoutput31 reserved32 reserved33 GND GND34 +24Vin Powerinput Installation of wiring 1、 size2、 Installationmethod4×M6 Screw (including a spring washer, a flat washer) Description of product parameters and environmental indicators Serial number Name detailed 1 Video input 4，PAL / NTSC signal 2 +12V OUT output 2 3 Signal communication CAN：1circuit，Rate of optional，ISO11898 CAN 2.0B、J1939 GSM:1circuit， GPS link：1 circuit 4 display 10.4inch
SECD‐10IA‐03User'sManual4|ShanghaiRisingDigitalCo.,Ltd.resolution：800×600（3RGB） TFT 5 touch 4Linear resistance touch 6 Conventional parameters kernel： TMS320F28335（32 bit DSP），FGPA（video） Frequency：150MHZ Power supply：12~36 V.DC （Recommended voltage 24V.DC，36 V Do not work for a long time） output voltage：12 V.DC，1A Consumption of current：0.55 A.DC（24 V.DC） Power waste：≤ 14W Video display: pip, 4 division / single 7 work environment working temperature：- 25 ~ 65 °C Storage temperature：- 30 ~ 80 °C Overvoltage protection：37.2 V Anti vibration：4 - 300 HZ 10mm 5G Impact resistance：50G 6ms & 11ms Relative temperature：10%~95 % Protection grade：IP65 8 Anti-interference performance of electrostatic discharge Power supply mode: air discharge + 15kV, contact discharge + 8kV No electricity mode: air discharge + 25kV, contact discharge 8kV 9 ISO7637 anti-interferencecapability Power line: ISO7637 - 2 IV level Signal line: conforming to ISO7637 -3 10 Anti surge grade IEC61000 – 4 – 5 IV 11 size 272 X 216 X 59.9（mm）
SECD‐10IA‐03User'sManual5|ShanghaiRisingDigitalCo.,Ltd.Three:developmentanddebugging1、hardwaredevelopmentplatformConnectwiththecontrollerbyCANBus.SupportCAN2.0B,CanOpen,J1939protocolTheLMUSBemulatorpluginPCbyUSBinterface.AndtheUSBemulatorisconnectwiththedisplayscreenbyCAN‐bus.LMStudio(thesoftwaredevelopmentenvironment)canbesetupinPC.Andthehardwaredevelopmentplatformiscompleted.
SECD‐10IA‐03User'sManual6|ShanghaiRisingDigitalCo.,Ltd.LMStudio(thesoftwaredevelopmentenvironment)canbesetupinPC.Theusercancreateproject,createpage,addthewidget,generatethescript,downloadprogram,programdebugger. Appendix 《DGUSScreendevelopmentguide》《LMProgrammingmanual》5、The instructions on the camera： 1）Standard specification This product can signal automatic identification both formats: NTSC, PAL. It is important to note when replacing different format cameras, need to install the screen after power. For multiple display, please ensure that the camera used for unified format. 2）Installation Angle Installed the camera at a vertical angle , please make sure that it can achieve the best effect of display. Actual situation, please according to the display effect the appropriate 2.、softwaredevelopmentenvironmentLMStudioistheplatformforsoftwareprojectmanagement,codeediting,codecompiling,codedebugger,codedownloading.WecanuseLMlanguagetodevelopprogram.UsercandevelopHMIbythewayofgraphicuserinterface(GUI).Weonlyneedtocreatesomewidgetinthedevelopmentenvironment.Thenattachthevaluetothewidgetparameter.AndwritesomeLMscriptonthebackgroundprogram.GraphicalshowbyLMstudioGUImoduleisthesametoonewhichisrunninginthedevice.
SECD‐10IA‐03User'sManual7|ShanghaiRisingDigitalCo.,Ltd.adjustments. 6、Matters needing attention： besides controller shell with good grounding, all the sensors are connected to thecontroller, the load, and so on input and output points must connect into a closed loop, which all of the input and output must be connected with the controller corresponding to; GPRS 、GPS Antenna installation, pay attention to the antenna will tighten the jointafter use. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help. Antenna gain including cable loss must not exceed 4.95dBi in GSM850/GPRS850,2dBi in GSM1900/GPRS1900 for the purpose of satisfying the requirements of CFR47 2.1091.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm form all persons and must not be co-located or operated in conjunction with any antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedure.Compliance of this device in all final product confiqurations is the responsibility of the Grantee.

Navigation menu