Rising Digital SECD-5I0A Display screen User Manual
Shanghai Rising Digital Co.,Ltd. Display screen Users Manual
User Manual
SECD‐5I0A‐03 user manual Document Number: Dense level: Version Number: Shanghai Rising Digital Co.,Ltd. SECD-5I0A-03&SECD-5I0A-03(S) &SECD-5I0B-03(S) USER MANUAL V1.2 SECD‐5I0A‐03 user manual CATALOG One: Function....................................................................................................................................................1 1、Powerful function, good sharp................................................................................................................................. 1 2、LM development environment.................................................................................................................................3 Two: Function definition.................................................................................................................................. 4 1、interface definition................................................................................................................................................... 4 2、size............................................................................................................................................................................ 5 3、34 pin interface definition........................................................................................................................................ 5 Three: development and debugging................................................................................................................ 7 1、hardware development platform............................................................................................................................. 7 2.、software development environment.......................................................................................................................7 3、example.................................................................................................................................................................... 8 3.1、graphic development........................................................................................................................................ 8 3.3、download the photos and program................................................................................................................ 11 Four: connect the controller...........................................................................................................................13 SECD‐5I0A‐03 user manual One: Function 1、Powerful function, good sharp control、display、GPS/GPRS/WIF communication input and output signals,for sampling and controlling good sharp:PAD sharp 1) 2) 3) 4) Voltage input: channel:6 signal:0〜5V.DC precision:0.5% resolution:0.025% Resistance input : channel:2 precision:0.5% resolution:0.025% Discrete input(low level): channel:5 signal peak:0〜40V.DC frequency:0Hz〜1KHz Periodic input: channel:1 signal peak:1.2〜36V.DC range:10Hz〜70KHz SECD‐5I0A‐03 USER MANUAL 5) 6) 7) 8) precision:0.1% PWM output: channel:6 frequency:50〜2.55kHz current:0〜1.5A precision:1% resolution:0.025% features:overpressure、short circuit protection Motor driver output: channel:4(one stepper motor) contact capacity:40V.DC 1.2A frequency:0Hz〜130Hz features:overpressure、short circuit protection Digital output: channel:6 contact capacity:36V.DC frequency:0Hz〜1KHz 1.8A Communication interface: CAN:1circuit,Rate of optional,ISO11898 Communications link:1circuit,4G/GSM CAN 2.0B、J1939 North American version‐frequency band LTE‐FDD B2/4/5/12/17,WCDMA B2/4/5,GSM 850/1900 The European version—frequency band LTE‐FDD B1/3/5/7/8/20,WCDMA B1/5/8,GSM SECD‐5I0A‐03 USER MANUAL 850/900/1800/1900 The Chinese version—frequency band LTE‐FDD B1/3/8,LTE‐TDD B38/39/40/41, WCDMA B1, TD‐SCDMA B34/39, 9) GSM 900/1800 GPS link:1 circuit Display parameters: resolution:640×480(3RGB) 10) Other indicators kernel: ARM Contex‐M4(32bit) proposed kernel:168MHz duty cycle: ≤5 ms power supply: 9〜36V.DC(Under the recommended voltage 24 v DC 36 v can't work for a long time) output voltage: Current consumption: 0.2A.DC(24V.DC) Working temperature: ‐20〜+65℃ Storage temperature: ‐25〜+80℃ overvoltage protection: 37.2V high temperature protection:80℃ vibration level: 6.8g, 8.3‐400HZ protection grade: IP65,all‐round protection relative humidity: 10%〜90% overall dimensions: 120mm×88mm×51.5mm 5V.DC,0.75A 2、LM development environment LM Studio development environment which is based on IEC61149 SECD‐5I0A‐03 USER MANUAL LM Studio GUI module provide the graphic user interface(GUI) Lots of function blocks which can be used to develop graphic and program quickly Two: Function definition 1、interface definition SECD‐5I0A‐03 USER MANUAL 2、size 4×M6 screws 3、34 pin interface definition NO NAME FUNCTION REMARK CAN_L CAN Low CAN_H CAN High Communicate with controller; Program download and debug TI1 Periodic input AI_V5 Analog input Active High AI_V6 Analog input Active High DI_L5 Digital input Active low RS Reset Ground beyond 3s GND Ground +5VOUT +5V Output SECD‐5I0A‐03 USER MANUAL 10 PWM_1/DO_1 Pulse‐width Modulation/Digital Output 11 A+ Moto A+ 12 DI_L1 Digital Input Active low 13 DI_L2 Digital Input Active low 14 DI_L3 Digital Input Active low 15 DI_L4 Digital Input Active low 16 A‐ Moto A‐ 17 SMI The Ignition Signal 18 PWM_2/DO_2 Pulse‐width Modulation/Digital Output 19 B+ Moto B+ 20 B‐ Moto B‐ 21 AI_V1 Analog input 22 PWM_6/DO_6 Pulse‐width Modulation/Digital Output 23 AI_R1 Analog Input 24 GND Ground 25 +24VIN Power 26 PWM_3/DO_3 Pulse‐width Modulation/Digital Output Voltage type Resistance type Range:12~36VDC PWM_4/DO_3 Pulse‐width Modulation/Digital Output PWM_5/DO_4 Pulse‐width Modulation/Digital Output 29 AI_V2 Analog Input Voltage type 30 AI_V3 Analog Input Voltage type 31 AI_R2 Analog Input Resistance type 32 AI_V4 Analog Input Voltage type 33 GND Ground 34 +24VIN Power 27 28 Range:12~36VDC SECD‐5I0A‐03 USER MANUAL Three: development and debugging 1、hardware development platform The LM USB emulator plug in PC by USB interface. And the USB emulator is connect with the display screen by CAN‐bus. LM Studio (the software development environment) can be setup in PC. And the hardware development platform is completed. 2.、software development environment LM Studio is the platform for software project management, code editing, code compiling, code debugger, code downloading. We can use LM language to develop program. User can develop HMI by the way of graphic user interface(GUI) . We only need to create some widget in the development environment. Then attach the value to the widget parameter. And write some LM script on the background program. Graphical show by LM studio GUI module is the same to one which is running in the device. SECD‐5I0A‐03 USER MANUAL Figure 1 LM Studio setup LM Studio (the software development environment) can be setup in PC. The user can create project, create page, add the widget, generate the script, download program, program debugger. 3、example 3.1、graphic development create a new project add the GUI widget generate GUI code 3.1.1 create a new GUI project 3.1.2 add the GUI widget create the widgets in one page by the software development environment SECD‐5I0A‐03 USER MANUAL create an icon by the software development environment SECD‐5I0A‐03 USER MANUAL create the number by the software development environment create a bar graph 10 SECD‐5I0A‐03 USER MANUAL 3.1.3 generate GUI code Double –click the graphic, GUI code is generated automatically 3.3、download the photos and program 3.3.1 ready to start 1)create CODE,GUI file in the USB disk CODE file ‐‐‐ copy the LM program and GUI program 11 SECD‐5I0A‐03 USER MANUAL 2)GUI file, create a new file —GUICFG.txt ,which is the configuration file。 GUICFG.txt GUIType:n,n is the type of display screen: 1—4.3 inch; 2‐‐‐5.0 inch 3—7.0 inch GUILib:V 3)GUI file: create the ICON file、LIB file、PHOTO file LIB file‐‐‐libs,such as XXXX.DZK PHOTO file‐‐‐photos,such as XXXX.bmp ICON 文件夹‐‐icons,such as XXXX.bmp 3.3.2 Start to read photos, libs, and icons from the USB disk 1)USB disk is connect with the display screen USB interface 2) delay 5 seconds,it starts to read。 12 SECD‐5I0A‐03 USER MANUAL Four: connect the controller Connect with the controller by CANBus. Support CAN2.0B, CanOpen, J1939 protocol 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Administrator Create Date : 2017:11:29 09:02:55+08:00 Modify Date : 2017:11:29 15:28:49+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.3.3 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:11:29 15:28:49+08:00 Format : application/pdf Title : <5C5C3139322E3136382E322E3130325CCAB5D1E9CAD25C215246CAC2D2B5B2BF5C323031372050726F6A6563745C35D4C25C303231373035303036315720BBAAD0CB20CFD4CABEC6C120534543442D353130412D303320D1EED5F1D3EE2DCDF5C8AB28D7AAC1F5BFA1B3BDA3A92D4643432D494428D0C5B Creator : Administrator Document ID : uuid:959a25ee-6224-4b7d-a4c1-852f5cc94ff6 Instance ID : uuid:53567407-81c5-4484-8dfe-425a3023104a Page Count : 16EXIF Metadata provided by EXIF.tools