Ritetemp 6020 Owner S Manual

: Ritetemp Ritetemp-6020-Owner-S-Manual ritetemp-6020-owner-s-manual ritetemp pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Operation 6020
Temperature
HEAT/COOL
Display
Mode Switch

TEMP
UP button

HEAT
OFF
COOL

Farenheit/Celcius
indicator

ROOM TEMP

TARGET

TEMP

HEAT

FAN
ON
AUTO

TEMP DOWN button

PG

1

Fan
Switch

Current Temperature
Display

SET Temperature
Display

Statement of use: The 6020 can be used with millivolt,
24VAC, 1 and 2 stage conventional gas/oil/elec heat, 1 and 2
stage heat pumps, 2 or 3 wire zoned hot water, zoned forced
air, 1 and 2 stage cooling and hybrid systems.
It cannot be used with 120 volt heating systems.

Configure
Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the
Room temperature. Set the Fan switch to AUTO.

Operate
Press the TEMP UP and TEMP DOWN buttons to select the desired
temperature. The TARGET icon will be displayed with your desired
temperature. (Display will return to room temp in 5 sec).
In the winter, set the system switch to HEAT to control your heating system.
In the summer, set the system switch to COOL to control your AC.
In spring and fall or when windows are open,
you can set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your system's fan during
heating and cooling.
Setting the FAN switch to ON runs your system's fan continuously even
without heating or cooling.
PG 2

Low Battery
When the batteries are low, the battery icon will flash. The two AAA
batteries in the unit need to be replaced. The HVAC system will stop
functioning when the thermostat loses power; replace batteries as soon
as you see this warning. Press RESET after replacing batteries
0

0

F / C Select
The F/C jumper is under the top cover Jumper #5. It determines which
temperature system is displayed on the LCD display. With the jumper off, the
display is Fahrenheit (default setting), with the jumper on both pins, the
display is Centigrade. When the jumper is changed, the unit must be reset
(under the top cover on the left).

To set a Heat Pump's Aux only mode

PG

4

If you have a heat pump with auxiliary heat, and the heat pump is not
working, you can use the auxiliary heat only by moving jumper 1 [heat pump]
to jumper position 2 [ Aux only].
Celsius
Aux Only
jumper
Reset
button
Heat Pump
12 34567

Customer Support: 877-505-2353 Visit our webiste
www.ritetemp-thermostats.com

1611-010



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:203e05bd-152d-4122-b45e-52d6233d4b96
Modify Date                     : 2007:01:19 11:35:18-08:00
Create Date                     : 2007:01:19 11:35:18-08:00
Metadata Date                   : 2007:01:19 11:35:18-08:00
Document ID                     : uuid:ad225782-178c-46ca-a3e2-d19257939ba0
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe PDF Library 2.0

EXIF Metadata provided by EXIF.tools