Rixson Checkmate Series S 99 826, 926, 626, 726 Installation Instructions 80 9399 0102 015

User Manual: Rixson Checkmate Series - s 99-826, 99-926, 99-626, 99-726 Installation Instructions Installation Instructions

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

RIXSON

Checkmate® RIXSON
Series
99-626/99-826 (with detector)
ASSA ABLOY
99-726/99-926 (without detector)

Installation Instructions

®

CAUTION
An incorrectly installed or improperly
adjusted door closer can cause property
damage or personal injury. These instructions
should be followed to avoid the possibility
of misapplication or misadjustment.

ASSA ABLOY

Door Holder and Releasing Device
WITH and WITHOUT
Integral Smoke Detector

®

Models
Hinge (Pull) Side of Stop (Push) Side of
Door Application
Door Application

99-626
99-726

99-826
99-926

NOTES: - For wiring of 99-626/99-826 models, see "Checkmate®"
"Wiring Instructions" No. 80-9399-0103-015 (07-14)

99-826 PULL SIDE
illustrated
LH – Left Hand Door
RHR – Right Hand Reverse
99-726 PUSHL SIDE
illustrated
LH – Left Hand Door
RHR – Right Hand Reverse

99-726 PUSH SIDE
illustrated
RH – Right Hand Door
LHR – Left Hand Reverse

Hinge Edge of Door

Hinge Edge of Door

99-826 PULL SIDE
illustrated
RH – Right Hand Door
LHR – Left Hand Reverse

Components:

Arm Bracket
& Tube

99-826/99-926 Track

Adjusting
Screw

99-926 Hook-Up Box

Adjusting
Rod

Smoke
Detector

99-826 Hook-Up Box

Preparation for Fasteners

Pull (Hinge) Side
Push (Stop) Side
99-626 Hook-Up Box

99-726 Hook-Up Box

Door or Frame Drill-Sizes
Aluminum
or Metal No drill required
Self-Drilling Screw
Standard
Wood 3/16” (4.30 mm)
Pilot hole required
1/4” - 20 machine
Metal Drill: #7 (0.201” dia.)
Tap: 1/4” - 20
screw
Hollow 9/32” (7 mm) through;
Metal 3/8” (9.5 mm) door face
opposite to closer
Sleeve nuts and
Aluminum 3/8” (9.5 mm) through
bolts
Optional
or Wood
9/32” (7 mm);
Through-bolts and
All
3/8” (9.5 mm) dia. x
grommet-nuts
3/8” (9.5 mm) deep on
door opposite to closer
Fasteners

99-626/99-726 Track

Smoke
Detector

NOTE:

 For special applications a separate door and frame

 Unit must be mounted on interior of building in dry



 See NFPA70 for wiring requirements and NFPA72 for alarm



preparation template is packed with these instructions.
Use this instruction sheet for installation sequence and
closer adjustments only.
Use of an auxiliary door stop is always recommended.

Copyright © 2009, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

environment, maximum humidity of 95%.

system requirements.

1

80-9399-0102-015 (07-14)

99-826 / 99-926 Series

RIXSON
ASSA ABLOY

Hinge (Pull) Side Application

1

Parts

®

2

Mark and Drill Holes

Preparation for Fasteners

Solenoid wire
coiled inside
end of track

Power Track

Dim. "A”

Dim. "B”

Fasteners

99-926

31-1/16
(788)

32-1/8
(816)

Self-Drilling
Screw

99-826

34-11/16
(881)

35-3/4
(908)

1/4”-20
machine screw

CL

Door or
Frame
Aluminum
or Metal
Wood
(see Note)
Metal

Drill Sizes
No drill required
3-16” (4.3mm)
Drill #7 (.201” dia)
Tap 1/4”-20

Note: Wood doors/frames MUST have pilot
hole when using Self-Drilling Screws.

1/2
(13)

B
A
3-5/8
(92)

1-7/16
(37)

19
(483)

3/4
(19)
7-1/4
2-1/2
(64)
(184)
Right Hand Shown

7/8 (22) Conduit
hole for concealed
wiring only

Installation Sequence

See Page 4 for
wiring instructions.
B

4

3

After installed,
bend out tabs
to secure.

C

1-1/4
(32)

Hold Open Angle
G

(Between 85° and 110° only)
A

A

Lock into
hold-open

D

B

D
Use holes
that align
in arms

F

2

E
C Open door to

1
Copyright © 2009, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

desired angle
2

80-9399-0102-015 (07-14)

99-626 / 99-726 Series

RIXSON
ASSA ABLOY

Stop (Push) Side Application

1

Parts

®

Mark and Drill Holes

2
Preparation for Fasteners

Power Track

Dim. "A”

Dim. "B”

Fasteners

PTO

30-9/16
(776)

31-11/16
(805)

Self-Drilling
Screw

PTDO

34-3/16
(868)

35-5/16
(897)

Solenoid wire
coiled inside
end of track

1/4”-20
machine screw

Door or
Frame
Aluminum
or Metal
Wood
(see Note)
Metal

Drill Sizes
No drill required
3-16” (4.3mm)
Drill #7 (.201” dia)
Tap 1/4”-20

Note: Wood doors/frames MUST have pilot
hole when using Self-Drilling Screws.

B
A
CL

3-1/8
(79)

12
(305)

1/2
(13)

1-1/8 (29) hole
for Conduit
1
(25)

19
(486)

Bottom of Frame Stop
2-3/4
(70)

5-1/8
(130)

Left Hand Shown

2-1/2
(64)

Installation Sequence

3

Hold Open Angle

4

(Between 85° and 110° only)

See Page 4 for
wiring instructions.
B
F
A
Lock into
hold-open

B

D
Use holes
that align
in arms

C
A
D

2

C Open door to
desired angle

1

E

Copyright © 2009, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

3

80-9399-0102-015 (07-14)

RIXSON
99-726 / 99-926 Support Unit Wiring
Diagram
(120VAC Input)

99-726 / 99-926 Support Unit Wiring Diagram
(24VAC/DC Input)

Input
Power
Earth
(+)
(-)

24VAC/DC Circuit Board

ASSA ABLOY

(Do not use a 120VAC 99-726 / 99-926 unit when power is
supplied from a 99-626 / 99-826 unit)
Input
120VAC Circuit Board
Power
4-Pin
Jumper
Earth
3
(+)
1
2
(-)
1
2
3
4

4-Pin
Jumper

3
2
1

1
2
3
4

2-Pin Jumper

Openings for surface
wiring shown

2-Pin Jumper

SOL

Terminal Strip for
Power Input Connection

Openings for surface
or concealed wiring

Header for Solenoid
Connection

Fuse
125V / 1/2A

®

SOL

Terminal Strip for
Power Input Connection

Test Switch

Header for Solenoid
Connection

Fuse
125V / 1/2A

Test Switch

ELECTRICAL DATA
120VAC

24VAC

24VDC

Detector

For 99-626/99-826
Models:

132V Max
26.4V Max
26.4V Max
26.4V Max
Voltage 120V 102V Min 24V 20.4V Min 24V 20.4V Min 24V 20.4V Min

Refer to Wiring Instructions
No. 80-9399-0103-015 (02-09)
for making wiring connections.

Current

.036 Amps

.059 Amps

.074 Amps

0.034 Amps

NOTES:
 Maximum wire size is 14AWG.
 All wiring and connections use standard wiring practice conforming with
local wiring codes.

Cont.:
increase the releasing force by turning the screw
accessible thru the end cap of the track using the
9/64” hex wrench provided.
 Again, open door to the hold-open position.
Depress “Test Switch” button on the hook-up
board...door should close. If arm does not
release, see previous step.

IMPORTANT:
Remove solenoid wire from end of track before
installing track to frame. Do not pinch or crimp wire.
Once track and hook-up box are installed, solenoid
wire must be plugged into Header on circuit board
shown above.
After making all wiring connections:
 Turn power to unit “ON”. (On Master (99-626 /
99-826) unit only, red LED should illuminate once
every 15 sec.).
 Track’s hold open force is preset at the factory.
 Open door to hold-open position. Manually pull
door out of hold-open and release...door should
close. If arm does not release from hold-open,
Copyright © 2009, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

RIXSON

®

ASSA ABLOY
3000 Highway 74 East • Monroe, NC 28112
Tel: (800)- 457- 5670
www.r ixson.com

4

80-9399-0102-015 (07-14)



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 4
Create Date                     : 2014:07:14 10:26:42-04:00
Modify Date                     : 2014:07:14 10:26:42-04:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Author                          : McNally;Tommy
Creator                         : CorelDRAW X6
Title                           : Untitled-1

EXIF Metadata provided by EXIF.tools