Rixson FM990 Door Release DR100210
User Manual: Rixson FM990 Door Release Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2000, 2013, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Electromagnet
Assembly and
Wall Cover Bracket
Backup
Plate
Door
Armature
Contact Plate Adjusting
Screw Location
Door
Plate
Door
Armature
* FOR WIRING
SEE NOTE 3
Wall
Cover
Plate
Surface Applied
Concealed Mounting
Recommended for
Solid Wood Doors Only
Conduit Entry Must Be Made Using
TOP OR BOTTOM KNOCKOUTS ONLY
Thru Bolt Mounting
Recommended for
Hollow Metal, Hollow
Core or Composite Type
Wood Doors
Backup Plate
#6-32 Set Screw
2-3/4
(70)
1-13/16
(46)
4-1/2
(114)
#12 x 1-1/2 FH
Phillips Wood
Screw
(2 Places)
2-5/8
Approx.
(67)
2-17/32
(64)
2" x 4" x 2-1/2"
(50.8 x 101.6 x 63.5)
(Minimum Depth)
Switch Box by Others
IMPORTANT:
This depth must be
no less than 2-1/2" (63.5)
1-3/4
(44)
Lock Edge
of Door
6-32 x ½" OHMS
(2 Places)
Notes:
1. Do not scale drawing.
2. Total projection 1-7/8" (48mm). (Includes Electromagnet, Armature Assembly and Wall
Cover plate.)
3. Non-tri voltage magnets have two non-polarized wires to be connected. Tri voltage
magnets are connected using a terminal strip on back of magnet. One wire in common
and one wire in the appropriate voltage terminal (non-polarized).
4. See Step 1 on Installation Instructions for Switch Box location. Anchor Switch Box to
Pull Side
of Door
1/4-20 x 2-1/16"
THMS
(2 Places)
withstand a minimum 50 lb. pull. Switch Box shown installed in vertical position.
5. Door closing mechanism should have a 3 lb. closing force at the degree of door opening
where door armature and electromagnet engage.
6. Door hardware must not project more than 1-5/8" (48mm) on pull side of door.
7. Mounting of Switch Box should be reinforced to withstand shock of door opening.
Failure to do so will cause Box anchors to work loose.
8. All dimensions given in inches (mm).
RIXSON
FM990 Door Release
®
ASSA ABLOY
www.rixson.com
TEMPLATE NUMBER
DR100210A
DATE
07-13
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 1994, 2013, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
INSTALL SWITCH BOX. The degree of door opening will not permit
proper alignment between armature and wall magnet.
1. Use table to locate Switch Box.
2. Determine door width (Dim "B"). Measure pivot centerline to wall
(Dim. "A"). Find dimension "C" in table.
Example: Pivot centerline to wall ("A") = 10" (254mm)
Door Width ("B") = 36" (914mm)
Switch Box Centerline ("C") = 33" (838mm)
3. If "A" or "B" falls between the numbers listed in table, allow for
difference.
Example: Pivot centerline to wall ("A") = 7" (178mm)
Door Width ("B") = 36" (914mm)
Switch Box Centerline ("C") = 33-5/8" (854mm)
Location of Switch Box
6. Check degree of door opening in table and coordinate with door
closers and other door hardware.
B
C
7. Total projection of door hardware must not project more than 1-5/8"
(41mm) on pull side of door.
4. If dimensions "A" and "B" intersect in shaded area of table DO NOT
Door Jamb
A
5. Height to be determined by others. Suggested height is 2' - 4'
(610mm - 1219mm) from floor and/or not over 6' (1829mm).
"A" – Pivot Centerline to Wall
"B" – Door Width
"C" – Pivot Centerline to
Switch Box Centerline
CL
Switch
Box
Door Width "B"
28" (711)
30" (762)
"C"
Deg. "C"
Deg.
2"
26"
28"
92° (711)
92°
(51) (660)
4"
26"
28"
97° (711)
96°
(102) (660)
6" 25-5/8
27-5/8
(152) (651) 102° (702) 101°
8" 25-1/8
27-1/4
(203) (638) 106° (692) 105°
10"
(254)
12"
(305)
Dim.
"A"
Mfr.
Steel City
Appleton
Bowers
Raco
32" (813)
"C"
Deg.
29-7/8
92°
(759)
29-7/8
96°
(759)
29-5/8
(753) 100°
29-1/4
(743) 104°
Suggested Switch Boxes
No.
Size
CD
222
52
500
34" (864)
"C"
Deg.
32"
93°
(813)
32"
95°
(813)
31-3/4
99°
(807)
31-3/8
(797) 103°
31"
(787) 105°
Mfr.
3" x 2" x 2-1/2" Deep Universal
(76.2 x 50.8 x 63.5)
36" (914)
38" (965)
"C"
Deg. "C"
Deg.
34-1/8
36"
93° (914)
92°
(867)
34-1/8
36"
95° (914)
95°
(867)
33-3/4
35-3/4
98° (908)
97°
(857)
33-1/2
35-1/2
(851) 102° (902) 101°
33"
35"
(838) 106° (889) 105°
40" (1016)
"C"
Deg.
37-7/8
92°
(962)
37-7/8
95°
(962)
37-3/4
97°
(959)
37-3/8
(949) 101°
37"
(940) 104°
Utility Conduit Boxes
No.
Size
42" (1067)
"C"
Deg.
40"
(1016) 93°
40"
(1016) 95°
39-7/8
(1013) 97°
39-1/2
(1003) 101°
39-1/8
(994) 104°
44" (1118)
"C"
Deg.
42"
(1067) 93°
42"
(1067) 95°
41-7/8
(1064) 97°
41-1/2
(1054) 101°
41-1/8
(1045) 104°
46" (1168)
"C"
Deg.
43-7/8
(1114) 92°
43-7/8
(1114) 94°
43-3/4
(1111) 97°
43-3/8
(1102) 100°
43-1/8
(1095) 103°
42-5/8
105°
(1083)
48" (1219)
"C"
Deg.
45-5/8
(1159) 92°
45-5/8
(1159) 94°
45-1/2
(1156) 97°
45-1/4
(1149) 99°
45"
(1143) 102°
44-1/2
104°
(1130)
Dimensions given in inches (mm).
58371-1/2 4" x 2-1/8" x 2-1/2" Deep
58371-3/4
(101.6 x 54 x 63.5)
A 4" (101mm) square outlet box with a 3/4" (19mm) or 1" (25mm) raised cover for single devices may also be used.
RIXSON
FM990 Door Release
Location Sheet
®
ASSA ABLOY
www.rixson.com
TEMPLATE NUMBER
DR100210B
DATE
07-13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2013:07:02 11:33:12-04:00 Modify Date : 2013:07:02 11:33:12-04:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Kim Creator : CorelDRAW X6 Title : Untitled-1EXIF Metadata provided by EXIF.tools