Rixson IS EM19U Side Jamb Pivot 3/4 Offset Handed
User Manual: Rixson Side Jamb Pivot 3/4 Offset - Handed Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2003, 2009, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 1/8 (3.2) or 3/16 (4.8) See Note 5. Bevel Heel Edge of Door 1/8" in 2" (3.2 in 50.8) See Note 5. 5/16 (8) 13/16 (20.6) Jamb Shim Door Shim 3/4 (19) 3/8 (9.5) 1-7/16 (36.5) Door Leaf 5/16 (8) 1/4 (6.4) 3/4 (19) Jamb Leaf 1-15/16 (49.2) 2-1/2 (63.5) 3-9/16 (90.5) 3/16 (4.8) 1/8 (3.2) Min. Clearance 7/16 (11.1) 1-1/8 (28.6) 1-17/32 (38.9) 2-1/2 (63.5) 3-15/32 (88.1) 3-7/8 (98.4) 4-5/8 (117.5) 4-9/16 (116) 5 (127) 5 (127) 5/16 (7.93) 13/16 (20.63) 1-1/8 (28.6) Notes: 4-1/4 1. Do not scale drawing. (104.7) 2. Dimensions are given in inches (mm). 3. Pivot drilled for 5/8" x 1/4-20 FHMS 4. Right hand shown. 5. For hollow metal use 1/8" (3.2) shims (by Rixson) Door: 652001 Jamb: 652003 For aluminum use 3/16" (4.8) shims (by Rixson) Door: 652002 Jamb: 652004 6. See templates T-EM19U-A and T-EM19-HM for door and frame prep. 5/16 (7.93) 13/16 (20.63) 1-1/8 (28.6) RIXSON Side Jamb Pivot 3/4" Offset – Handed ® ASSA ABLOY www.rixson.com TEMPLATE NUMBER IS-EM19U DATE 07-09 Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2003, 2009, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. Handed EM19U Side Jamb Pivot Installation Instructions 3/4” Offset IMPORTANT: Prepare door and frame per instructions on reverse side. Door must be hung before the pivot is installed. The EM-19U pivot cannot take the downward load (weight) of the door. The door weight must be carried by a floor closer, bottom pivot or additional M-19 or M190 side jamb pivots. ALIGNMENT: To insure proper installation , the centerline of the side jamb pivot must be in line with the centerline of the top and bottom pivot points. See illustration. PIVOT INSTALLATION: NOTE: Door and jamb portion of EM-19U are assembled in the factory. They cannot be separated and must be installed as assembled. IMPORTANT: Use plumb line to make sure that center line of top pivot pin lines up with center line of bottom spindle Open door and connect wires on the jamb portion to the wires in the frame. Push the wires back into the frame as the jamb portion is set into place in the frame mortise. Install the 5 jamb screws. Connect the wires on the door portion to the door wires. Push the wires back into the door as the door portion is set into place in the door mortise. Install 5 door screws. Test the electrical installation for proper operation of the wired door devices. ELECTRICAL RATINGS: Low voltage only Current ratings each wire: 2 amp. continuous. How To Determine Hand of Door LH RH Face a door swinging open away from you. If it opens to the right, it is right hand. If it opens to the left, it is left hand. RIXSON Side Jamb Pivot 3/4" Offset – Handed ® ASSA ABLOY www.rixson.com TEMPLATE NUMBER IS-EM19U DATE 07-09
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : AdobePS5.dll Version 5.0.1 Modify Date : 2009:07:07 10:09:44-04:00 Create Date : 2009:07:07 10:09:44-04:00 Format : application/pdf Title : IS-EM19U.cdr Document ID : uuid:023fe21a-4f4b-49f5-8898-6d8c85764abc Instance ID : uuid:fbd9c298-948c-49a4-babe-3bf31adfd43c Page Count : 2 Creator : AdobePS5.dll Version 5.0.1EXIF Metadata provided by EXIF.tools