Rixson IS (F)M19(0) X 1.5 M19, FM19, M190, FM190 Intermediate Pivot 1 1/2' Offset FM190x1.5

User Manual: Rixson M19, FM19, M190, FM190 Intermediate Pivot 1-1/2' offset Installation Instructions

Open the PDF directly: View PDF PDF.
Page Count: 2

M19, FM19, M190, and FM190
Intermediate Pivot
1-1/2" Offset
IS- ( ) x 1.5(F)M19 0
Notes:
1. Do not scale drawing.
2. Dimensions are given in inches (mm).
3. Pivot drilled for 1/4-20 x 5/8" FHMS or #14 x 1-1/2" FHWS.
4. Right hand shown.
5. Template drawing for reference only.
5-3/4
(146)
1-1/8
(28.6)
5
(127)
1-1/2
(38)
13/16
(20.6)
5/16
(8)
5/16
(8)
3/4
(19)
1/4
(6.4)
1/8 (3.2) Min. Clearance
3/16
(4.8)
Bevel Heel Edge
of Door 1/8" in 2"
(3.2 in 50.8)
4-5/8
(117.5)
3-9/16
(90.5)
2-1/2
(63.5)
1-15/16
(49.2)
1-7/16
(36.5)
3/8
(9.5)
Door Leaf
13/16
(20.6)
5/16
(7.9)
1-1/8
(28.6)
13/16
(20.6)
5/16
(7.9)
Jamb Leaf
5
(127)
4-9/16
(116)
3-7/8
(98.4)
2-1/2
(63.5)
3-15/32
(88.1)
1-17/32
(38.9)
1-1/8
(28.6)
7/16
(11.1)
www.rixson.com
ASSA ABLOY
RIXSON®
DATE
TEMPLATE NUMBER
07-09
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2006, 2009, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
M19, FM19, M190, and FM190
Intermediate Pivot
1-1/2" Offset
IS- ( ) x 1.5(F)M19 0
M19, M190 & FM190 Side Jamb PivotFM19,
Handed 1-1/2” Offset
Installation Instructions
Door should already be hung with top pivot and bottom pivot (or floor closer)
1. Mortise door & frame
per template on reverse side.
2. Affix pivot to door & frame.
3. Align pivot point from top
pivot to bottom arm.
(See diagram)
4. Loosen arm screw*.
5. Remove hex cap.
6. Turn stud screw clockwise.
Raise the door to the desired
height.
7. Using shims furnished with
bottom arm, fill gap between arm
and base.
8. Turn stud screw
counterclockwise until
door rests on shims.
9.
Replace hex cap.
10.
Tighten arm screw
on spindle. Open and
close door several times
Re-tighten arm screw.
How To Determine
Hand of Door
LH RH
Face a door swinging open away from
you. If it opens to the right, it is right hand.
If it opens to the left, it is left hand.
* If bottom arm is for a Uni-
Chek 67/68 or 117 pivot,
make sure the arm is
sitting all the way down
on the base. Make NO
adjustments to the M19.
www.rixson.com
ASSA ABLOY
RIXSON®
DATE
TEMPLATE NUMBER
07-09
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2006, 2009, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

Navigation menu