Robert Bosch RK225 Low Power Communication Device Transmitter User Manual gkflhma 1a p65

Download:
Mirror Download [FCC.gov]
Document ID	477672
Application ID	H7dMweDenxadVC2Xg6P7IA==
Document Description	User manual Pt3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.57kB (1619635 bits)
Date Submitted	2004-10-11 00:00:00
Date Available	2004-10-11 00:00:00
Creation Date	2004-09-08 08:39:22
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-09-17 13:31:49
Document Title	gkflhma-1a.p65
Document Creator	PageMaker 6.5
Document Author:	owners

1FEATURES OF YOUR HYUNDAI
34
INSTRUMENT CLUSTER AND INDICATOR LIGHTS
B260A02GK-AAT
B260A02GK-A
gkflhma-1a.p65
34
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
35
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Speedometer
Turn Signal Indicator Light
Odometer
Automatic Transaxle Position Indicator Light (If installed)
Coolant Temperature Gauge
Trip odometer
Fuel Gauge
Tachometer
Electronic Stability Program (ESP) Indicator Light (If installed)
Trip Odometer Reset Knob
Charging System Warning Light
Supplemental Restraint System (SRS) Service Reminder
Indicator (SRI)
gkflhma-1a.p65
35
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Seat Belt Warning Light
High Beam Indicator Light
Low Oil Pressure Warning Light
Malfunction Indicator Light (MIL)
Low Fuel Warning Light
Parking Brake/Low Brake Fluid Level Warning Light
CRUISE Indicator Light (If installed)
CRUISE SET Indicator Light (If installed)
Tail Gate Open Warning Light
Door Ajar Warning Light
ABS Service Reminder Indicator (SRI) (If installed)
9/8/04, 5:40 PM
1FEATURES OF YOUR HYUNDAI
36
WARNING AND INDICATOR LIGHTS
B260D01A-AAT
B260G01A-AAT
Turn Signal Indicator Lights
The blinking green arrows on the instrument
panel show the direction indicated by the turn
signals. If the arrow comes on but does not blink,
blinks more rapidly than normal, or does not
illuminate at all, a malfunction in the turn signal
system is indicated. Your dealer should be
consulted for repairs.
Low Oil Pressure Warning Light
WARNING:
If the both ABS SRI and Parking Brake/
Brake fluid level warning lights remain "ON"
or come on while driving, there may be a
problem with E.B.D (Electronic Brake Force
Distribution).
If this occurs, avoid sudden stops and have
your vehicle checked by your Hyundai dealer
as soon as possible.
B260P02Y-GAT
ABS Service Reminder Indicator (SRI) (If Installed)
When the key is turned to the "ON" position, the
Anti-Lock Brake System SRI will come on and
then go off in a few seconds. If the ABS SRI
remains on, comes on while driving, or does not
come on when the key is turned to the "ON"
position, this indicates that there may be a
problem with the ABS.
If this occurs, have your vehicle checked by
your Hyundai dealer as soon as possible. The
normal braking system will still be operational,
but without the assistance of the anti-lock brake
system.
gkflhma-1a.p65
36
B260F01A-AAT
High Beam Indicator Light
The high beam indicator light comes on whenever the headlights are switched to the high
beam or flash position.
CAUTION:
If the oil pressure warning light stays on
while the engine is running, serious engine
damage may result. The oil pressure warning light comes on whenever there is insufficient oil pressure. In normal operation, it
should come on when the ignition switch
is turned on, then go out when the engine
is started. If the oil pressure warning light
stays on while the engine is running, there
is a serious malfunction.
If this happens, stop the car as soon as it is
safe to do so, turn off the engine and check
the oil level. If the oil level is low, fill the
engine oil to the proper level and start the
engine again. If the light stays on with the
engine running, turn the engine off immediately. In any instance where the oil light
stays on when the engine is running, the
engine should be checked by a Hyundai
dealer before the car is driven again.
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
37
B260H01GK-AAT
Parking Brake/Low Brake Fluid
Level Warning Light
CAUITON:
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as
soon as possible. Driving your car with a
problem in either the brake electrical system or brake hydraulic system is dangerous, and could result in a serious injury or
death.
Warning Light Operation
The parking brake/low brake fluid level warning
light should come on when the parking brake is
applied and the ignition switch is turned to "ON"
or "START". After the engine is started, the light
should go out in three seconds.
If the parking brake is not applied, the warning
light should come on when the ignition switch is
turned to "ON" or "START", then go out in three
seconds. If the light comes on at any other time,
you should slow the vehicle and bring it to a
complete stop in a safe location off the roadway.
gkflhma-1a.p65
37
The brake fluid level warning light indicates that
the brake fluid level in the brake master cylinder
is low and hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications should be
added. After adding fluid, if no other trouble is
found, the car should be immediately and carefully driven to a Hyundai dealer for inspection.
If further trouble is experienced, the vehicle
should not be driven at all but taken to a dealer
by a professional towing service or some other
safe method.
Your Hyundai is equipped with dual-diagonal
braking systems. This means you still have
braking on two wheels even if one of the dual
systems should fail. With only one of the dual
systems working, more than normal pedal travel
and greater pedal pressure are required to stop
the car. Also, the car will not stop in as short a
distance with only half of the brake system
working. If the brakes fail while you are driving,
shift to a lower gear for additional engine braking
and stop the car as soon as it is safe to do so.
B260J01A-AAT
Charging System Warning Light
The charging system warning light should come
on when the ignition is turned on, then go out
when the engine is running. If the light stays on
while the engine is running, there is a malfunction in the electrical charging system. If the light
comes on while you are driving, stop, turn off the
engine and check under the hood. First, make
certain the generator drive belt is in place. If it is,
check the tension of the belt. Do this as shown
on page 6-23 by pushing down on the center of
the belt. Have the system checked by your
Hyundai dealer as soon as possible.
9/8/04, 5:40 PM
1FEATURES OF YOUR HYUNDAI
38
B260L02HP-GAT
B260K01F-AAT
Door Ajar Warning Light and
Chime (If Installed)
The door ajar warning light warns you that a door
is not completely closed and the chime warns
you that the key is in the ignition switch.
B260N02A-AAT
Tail Gate Open Warning Light
This light remains on unless the tail gate is
completely closed and latched.
NOTE :
The warning chime only sounds whenever
the key is in the ignition switch and the
driver's side front door is open simultaneously. The chime sounds until the key is
removed from the ignition switch or the
driver's side front door is closed.
B260M01A-AAT
Low Fuel Level Warning Light
The low fuel level warning light comes on when
the fuel tank is approaching empty. When it
comes on, you should add fuel as soon as
possible. Driving with the fuel level warning light
on or with the fuel level below "E" can cause the
engine to misfire and damage the catalytic
converter.
gkflhma-1a.p65
38
B260B01JM-AAT
SRS (Airbag) Service
Reminder Indicator (SRI)
The SRS service reminder indicator (SRI) comes
on for about 6 seconds after the ignition key is
turned to the "ON" position or after the engine
is started, after which it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,
or continuously remains on after coming on for
about 6 seconds when you turned the ignition
key to the "ON" position or started the engine,
or if it comes on while driving, have the SRS
inspected by an authorized Hyundai Dealer.
Malfunction Indicator
Light
This light illuminates when there is a malfunction
of an exhaust gas related component, and the
system is not functioning properly so that the
exhaust gas regulation values are not satisfied.
This light will also illuminate when the ignition key
is turned to the "ON" position, and then it will go
out in a few seconds after the engine is started.
If it illuminates while driving, or does not illuminate when the ignition key is turned to the "ON"
position, take your car to your nearest authorized Hyundai dealer and have the system
checked.
B260E01L-AAT
Seat Belt Reminder Light And
Chime
Seat belt reminder light comes and stays on until
the seat belt is fastened when the ignition key is
turned "ON" or "START".
And, the warning chime will also sound for about
6 seconds.
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
39
B260Q01E-GAT
B265C01LZ-AAT
CRUISE Indicator Light
(If Installed)
The cruise indicator light in the instrument cluster is illuminated when the cruise control main
switch on the end of the barrel is pushed.
The indicator light does not illuminate when the
cruise control main switch is pushed a second
time.
Information about the use of cruise control is
beginning on page 1-63.
B260R01E-GAT
CRUISE SET Indicator Light
(If installed)
B270A01A-AAT
Electronic Stability
Program Indicator Lights
(If installed)
BRAKE PAD WEAR WARNING SOUND
The electronic stability program indicators
change operation according to the ignition switch
position and whether the system is in operation
or not.
They will illuminate when the ignition key is
turned to the "ON" position, but should go out
after three seconds. If the ESP or ESP-OFF
indicator stays on, take your car to your authorized Hyundai dealer and have the system
checked. See section 2 for more information
about the ESP.
The front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed. The
sound may come and go or be heard all the time
when the vehicle is moving. It may also be heard
when the brake pedal is pushed down firmly.
Excessive rotor damage will result if the worn
pads are not replaced. See your Hyundai dealer
immediately.
The set indicator light in the instrument cluster
is illuminated when the cruise control switch is
pushed downward to "SET (COAST)".
The set indicator light does not illuminate when
the control switch is in the "CANCEL" position.
gkflhma-1a.p65
39
9/8/04, 5:40 PM
1FEATURES OF YOUR HYUNDAI
40
INSTRUMENT CLUSTER
B280A01A-AAT
B290A02A-AAT
FUEL GAUGE
ENGINE COOLANT TEMPERATURE
GAUGE
The needle on the engine coolant temperature
gauge should stay in the normal range. If it
moves across the dial to "H" (Hot), pull over and
stop as soon as possible and turn off the engine.
Then open the hood and after the engine has
cooled, check the coolant level and the water
pump drive belt. If you suspect cooling system
trouble, have your cooling system checked by
a Hyundai dealer as soon as possible.
B300A01A-AAT
SPEEDOMETER
HGK2059
The needle on the gauge indicates the approximate fuel level in the fuel tank. The fuel capacity
is given in Section 9.
HGK2060
WARNING:
Never remove the radiator cap when the
engine is hot. The engine coolant is under
pressure and could erupt and cause severe
burns. Wait until the engine is cool before
removing the radiator cap.
HGK2058A
Your Hyundai's speedometer is calibrated in
miles per hour (on the outer scale) and kilometers per hour (on the inner scale).
gkflhma-1a.p65
40
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
41
B330A03E-AAT
B310B01GK-GAT
TACHOMETER
Odometer/Trip odometer
Type A
Type A
Type B
HGK2061-1
B330A01GK
The tachometer registers the speed of your
engine in revolutions per minute (rpm).
HGK028B
Type B
Function of digital odometer/trip odometer
Pushing in the reset switch on the right side of
speedometer when the ignition switch is turned
"ON" will display the following sequence:
CAUTION:
The engine should not be raced to such a
speed that the needle enters the red zone
on the tachometer face. This can cause
severe engine damage and may void your
warranty.
HGK055C
gkflhma-1a.p65
41
9/8/04, 5:40 PM
1FEATURES OF YOUR HYUNDAI
MULTI GAUGE
42
B330C01GK-GAT
1. Odometer
(If installed)
The odometer records the total driving distance
in kilometers or miles, and is useful for keeping
a record for maintenance intervals.
Multi gauge is consists of torque gauge, instantaneous fuel consumption gauge and volt gauge.
NOTE:
Any alteration of the odometer may void
your warranty coverage.
2,3 Trip odometer
Records the distance of 2 trips in kilometers or
miles.
TRIP A: first distance you have traveled from
your origination point to a first destination.
TRIP B: Second distance from the first destination to the final destination.
To shift from TRIP A to TRIP B, press the reset
switch. When pressed for 1 second, it will reset
to 0.
gkflhma-1a.p65
42
B330C04GK
Instantaneous fuel Consumption gauge
B330C01GK
Torque gauge
It shows instantaneous fuel consumption according to the driving condition. The more indicated figure is low, the more it indicates efficient
driving situation.
It shows instantaneous change of the torque by
rpm.
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
MULTI-FUNCTION LIGHT SWITCH
B330C03GK
Volt gauge
It shows moment volt change and makes for
diver correspond to low volt situation.
gkflhma-1a.p65
43
43
B340A01A-AAT
B340B01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH
Turn Signal Operation
Lane Change Signal
Pulling down on the lever causes the turn
signals on the left side of the car to blink. Pushing
upwards on the lever causes the turn signals on
the right side of the car to blink. As the turn is
completed, the lever will automatically return to
the center position and turn off the turn signals
at the same time. If either turn signal indicator
light blinks more rapidly than usual, goes on but
does not blink, or does not go on at all, there is
a malfunction in the system. Check for a burnedout fuse or bulb or see your Hyundai dealer.
HGK2079
To indicate a lane change, move the lever up or
down to a point where it begins flashing.
The lever will automatically return to the center
position when released.
9/8/04, 5:40 PM
1FEATURES OF YOUR HYUNDAI
44
B340C03E-AAT
B340G01LZ-GAT
Parking light auto cut
Headlight Switch
Auto Light (If installed)
If you do not turn the parking lights "OFF" after
driving, the parking lights will automatically shut
"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn
the ignition key to the "ON" position.
B340D01A-AAT
High-beam Switch
HGK2074
To turn on the headlight high beams, push the
lever forward (away from you). The high beam
indicator light will come on at the same time. For
low beams, pull the lever back toward you.
HGK2075
To operate the headlights, turn the barrel on the
end of the multi-function switch. The first position turns on the parking lights, sidelights, tail
lights and instrument panel lights. The second
position turns on the headlights.
To operate the automatic light feature, turn the
barrel on the end of the multi-function switch. If
you set the multi-function switch to "AUTO", the
tail lights and headlights will be turned automatically on or off according to external illumination.
NOTE:
NOTE:
The ignition must be in the "ON" position
to turn on the headlight.
Switch on car light manually in foggy, cloudy
and rainy conditions.
gkflhma-1a.p65
44
9/8/04, 5:40 PM
FEATURES OF YOUR HYUNDAI
WINDSHIELD WIPER AND WASHER
SWITCH
B340E01A-AAT
B350A01A-AAT
Headlight Flasher
Auto Light Sensor
B340G01GK
HGK042A
NOTE:
o Never place anything over sensor located on the instrument panel, this will
ensure better auto light system control.
o Don't clean the sensor using a window
cleaner.
o If your vehicle has window tint or other
types of coating on the front windshield,
the AUTO light system may not work
properly.
gkflhma-1a.p65
45
HGK2077
To flash the headlights, pull the switch lever
toward you, then release it. The headlights can
be flashed even though the headlight switch is
in the "OFF" position.
The windshield wiper switch has three positions:
(1) Intermittent wiper operation
(2) Low-speed operation
(3) High-speed operation
NOTE:
To prevent damage to the wiper system, do
not attempt to wipe away heavy accumulations of snow or ice. Accumulated snow
and ice should be removed manually. If
there is only a light layer of snow or ice,
operate the heater in the defrost mode to
melt the snow or ice before using the wiper.
9/8/04, 5:40 PM
45
1FEATURES OF YOUR HYUNDAI
46
B350B01O-AAT
B350C01S-AAT
Mist Wiper Operation
Windshield Washer Operation
HGK044A
To use the windshield washer, pull the wiper/
washer lever toward the steering wheel. When
the washer lever is operated, the wipers automatically make two passes across the windshield. The washer continues to operate until
the lever is released.
Adjustable Intermittent Wiper Operation
HGK045A
If a single wipe is desired in mist, move the
windshield wiper and washer control lever up.
HGK043A
To use the intermittent wiper feature, place the
wiper switch in the "INT" position. With the
switch in this position, the interval between
wipes can be varied from 2 to 10 seconds by
turning the interval adjuster barrel.
NOTE:
o Do not operate the washer more than 15
seconds at a time or when the fluid
reservoir is empty.
o In icy or freezing weather, be sure the
wiper blades are not frozen to the glass
prior to operating the wipers.
o In areas where water freezes in winter,
use windshield washer antifreeze.
gkflhma-1a.p65
46
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
FRONT FOG LIGHT SWITCH
B390A01E-AAT
Rear Window Wiper And Washer Switch
Do not operate the washer continuously for
more than 15 seconds or when the fluid reservoir is empty; this could damage the system. Do
not operate the wiper when the window is dry;
this can result in scratching as well as premature wiper blade wear.
For the reason stated above,do not operate the
washer when the washer fluid reservoir is
empty.
: The rear window wiper starts to operate three times after the washer fluid
sprays onto the rear window.
(If Installed)
HGK142A
To turn on the front fog lights, push the switch.
They will light when the headlights are turned on.
2.OFF
3.INT : The interval between wipes operates
every 5 seconds intermittently.
4.ON : The rear window wiper starts to operate continuously.
5.
: The washer fluid will be sprayed onto
the rear window and the wiper operates
while the rear window wiper barrel is
placed in this position.
gkflhma-1a.p65
47
47
B360A01F-AAT
HGK046A
1.
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
48
HAZARD WARNING SYSTEM
REAR WINDOW DEFROSTER
SWITCH
B370A01A-AAT
NOTE:
B380A01A-AAT
The ignition must be in the "ON" position
for the rear window defroster to operate.
Type A
Type B
HGK2090-1
HGK140A
The hazard warning system should be used
whenever you find it necessary to stop the car
in a hazardous location. When you must make
such an emergency stop, always pull off the
road as far as possible.
The hazard warning lights are turned on by
pushing in the hazard switch. This causes all
turn signal lights to blink. The hazard warning
lights will operate even though the key is not in
the ignition.
To turn the hazard warning lights off, push the
switch a second time.
gkflhma-1a.p65
48
The rear window defroster and heated outside
rearview mirrors are turned on by pushing in the
switch. To turn the defroster off, push the switch
a second time. The rear window defroster
automatically turns itself off after about 15 minutes. To restart the defroster cycle, push in the
switch again after it has turned itself off.
CAUTION:
Do not clean the inner side of the rear
window glass with an abrasive type of glass
cleaner or use a scraper to remove foreign
deposits from the inner surface of the glass
as this may cause damage to the defroster
elements.
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
DIGITAL CLOCK
INSTRUMENT PANEL LIGHT
CONTROL (RHEOSTAT)
B400A01A-AAT
There are three control buttons for the digital
clock. Their functions are:
HOUR - Push "H" to advance the hour indicated.
MIN
- Push "M" to advance the minute indicated.
RESET - Push "R" to reset minutes to ":00" to
facilitate resetting the clock to the
correct time. When this is done:
gkflhma-1a.p65
10
11
11
12
: 30 and 11 : 29
: 00.
: 30 and 12 : 29
: 00.
49
HGK2150
The instrument panel lights can be made brighter
or dimmer by turning the instrument panel light
control knob.
HGK2118
For the cigarette lighter to work, the key must
be in the "ACC" position or the "ON" position.
To use the cigarette lighter, push it all the way
into its socket. When the element has heated,
the lighter will pop out to the "ready" position.
Do not hold the cigarette lighter pressed in. This
can damage the heating element and create a
fire hazard.
If it is necessary to replace the cigarette lighter,
use only a genuine Hyundai replacement or its
approved equivalent.
CAUTION:
Do not use electric accessories or equipment other than the Hyundai genuine parts
in the socket.
9/8/04, 5:41 PM
49
B420A02A-AAT
B410A01A-AAT
HGK143A
Pressing "R" between
changes the readout to
Pressing "R" between
changes the readout to
CIGARETTE LIGHTER
1FEATURES OF YOUR HYUNDAI
50
ASHTRAY
DRINK HOLDER
B430A01GK-AAT
B450A02GK-AAT
(If Installed)
Driver's
Passenger's
WARNING:
o Use caution when using the drink holders. A spilled beverage that is very hot
can injure you or your passengers. Spilled
liquids can damage interior trim and
electrical components.
o Do not place objects other than cups or
cans in the drink holder. Such objects
can be thrown out in the event of a
sudden stop or an accident, possibly
injuring the passengers in the vehicle.
HGK2120
The front ashtray may be opened by pushing
and releasing the ashtray door at its top edge.
To remove the ashtray in order to clean it, the
metal ash receptacle should be lifted out from
the ashtray door. Do not attempt to remove the
entire ashtray door assembly or damage will
result. To reinstall it, place it in the proper
position and press it down in the ashtray door.
The ashtray lamp will only illuminate when the
exterior body lights are switched on.
gkflhma-1a.p65
50
HGK2123
The drink holder is used for holding cups or
cans.
To use the passenger's drink holder, push the
drink holder.
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
SUNSHADE
SUNROOF
B470A01S-AAT
B460A01S-AAT
(If Installed)
(If Installed)
51
The sunroof can be operated with the ignition
key in the "ON" position.
B460B02GK-GAT
Opening the Sunroof System
HGK2026
HGK2022
WARNING:
gkflhma-1a.p65
51
CAUTION:
o Do not open the sunroof in severely cold
temperature or when it is covered with
ice or snow.
o Periodically remove any dirt that may
have accumulated on the guide rails.
The sunshade can be opened and closed by
sliding it forward or rearward when the sunroof
is closed. The sunshade will open automatically
when the sunroof is opened, but it must be
closed manually.
WARNING:
o Do not close a sunroof if anyone’s hands,
arms or body are between the sliding
glass and the sunroof sash, as this could
result in injury.
o Do not place your head or arms out of the
sunroof opening at any time.
Never adjust the sunshade while driving.
The sunroof can be electrically opened or closed
with the ignition key in the "ON" position. The
sunroof is moved to its fully open position by
pushing the " " switch, and to stop at the desired
position, push in any switches ( , , Up, Down).
To close, press and hold the " " button.
Release the button when the sunroof reaches
the desired position.
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
52
B460C01S-AAT
B460D03GK-AAT
Tilting the Sunroof System
Manual Operation of Sunroof
If the sunroof does not electrically operate:
HGK2025
HGK2023
The sunroof can be tilted by pushing the "UP"
button with the sunroof closed. Release the
button when the sunroof reaches the desired
position. To close the sunroof, press the
"DOWN" button.
HGK2024
1. Remove the cap located in the rear roof
panel by using a coin or screw driver.
2. Insert the hexagonal head wrench provided
with the vehicle into the socket. This wrench
can be found in the vehicle’s trunk or glove
box.
3. Push and turn the wrench clockwise to close
or counterclockwise to open the sunroof.
NOTE:
After washing the car or after there is rain,
be sure to wipe off any water that is on the
sunroof before operating it.
gkflhma-1a.p65
52
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
SPECTACLE CASE
INTERIOR LIGHT
B460E03GK-GAT
B480A01GK-GAT
Resetting the Sunroof System
MAP LIGHT
53
B491A01F-AAT
If the battery has been recharged, disconnected or is manually with operating the hexagonal head wrench, you may need to reset the
sunroof.
To do this;
1. Turn the ignition switch "OFF".
2. With pressing "
" "up" button at the same
time, turn the ignition switch "ON".
The resetting is failed when the ignition
key to the "OFF" within 1.5 seconds.
3. If the sunroof is set like this, the sunroof is
reset with tilting up/down automatically once
for all.
CAUTION:
If the sunroof is not reset, it may not operate
normally.
gkflhma-1a.p65
53
(3)
(1)
HGK2122
(2)
HGK2087
(1) Push in the map light switch to turn on the
driver side light.
(2) In the "DOOR" position, the interior courtesy light comes on when any door is
opened regardless of the ignition key position. The light goes out gradually 6 seconds
after the door is closed.
(3) Push in the map light switch to turn on the
driver side light.
The spectacle case is located on the front
overhead console.
Push the end of the cover to open or close the
spectacle case.
WARNING:
Do not open the spectacle case while the
vehicle is moving.
The rear view mirror of the vehicle can be
blocked by an open spectacle case.
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
54
GLOVE BOX
MIRROR
B500A01A-AAT
2. Next, adjust the mirror angle by depressing
the appropriate perimeter switch as illustrated.
B510B01A-AAT
OUTSIDE REAR VIEW MIRROR
Electric Type
CAUTION:
o Do not operate the switch continuously
for an unnecessary length of time.
o Scraping ice from the mirror face could
cause permanent damage. To remove
any ice, use a sponge, soft cloth or
approved deicer.
HGK2121
HGK2053
WARNING:
To avoid the possibility of injury in case of
an accident or a sudden stop, the glove box
door should be kept closed when the car is
in motion.
o To open the glove box, pull on the glove box
release lever.
The outside rearview mirrors can be adjusted
to your preferred rear vision, both directly behind the vehicle, and to the rear of the left and
right sides.
The remote control outside rearview mirror
switch controls the adjustments for both the
right and left outside mirror.
To adjust the position of either mirror:
1. Move the selecting switch to the right or left
to activate the adjustable mechanism for the
corresponding door mirror.
gkflhma-1a.p65
54
WARNING:
Be careful when judging the size or distance of any object seen in the passenger
side rear view mirror. It is a convex mirror
with a curved surface. Any objects seen in
this mirror are closer than they appear.
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
DAY/NIGHT INSIDE REAR VIEW
MIRROR
B510D01Y-AAT
B510C01A-AAT
OUTSIDE REARVIEW MIRROR HEATER
(If Installed)
FOLDING THE OUTSIDE REAR VIEW
MIRRORS
B520A01A-AAT
Type A
Type B
HGK2052
HGK2090-1
The outside rearview mirror heater is actuated
in connection with the rear window defroster. To
heat the outside rearview mirror glass, push in
the switch for the rear window defroster. The
rearview mirror glass will be heated for defrosting or defogging and will give you improved rear
vision in inclement weather conditions. Push the
switch again to turn the heater off. The outside
rearview mirror heater automatically turns itself
off after 15 minutes.
gkflhma-1a.p65
55
HGK2055
To fold the outside rear view mirrors, push them
toward the rear.
The outside rear view mirrors can be folded
rearward for parking in narrow areas.
Your Hyundai is equipped with a day/night inside
rear view mirror. The "night" position is selected
by flipping the tab at the bottom of the mirror
toward you. In the "night" position, the glare of
headlights of cars behind you is reduced.
WARNING:
Do not adjust or fold the outside rear view
mirrors while the vehicle is moving. This
could result in loss of control, and an accident which could cause death, serious injury or death.
9/8/04, 5:41 PM
55
1FEATURES OF YOUR HYUNDAI
PARKING BRAKE
56
B520B01O-GAT
HIGH-MOUNTED REAR STOP LIGHT
B530A01A-AAT
B550A01S-GAT
(Electric type) (If installed)
Type A
Sensor
HGK2051
The electric type day/night inside rearview mirror automatically controls the glare of headlights
of the car behind you. Adjust the rearview mirror
to the desired position.
In addition to the lower-mounted rear stoplights
on either side of the car, the high mounted rear
stoplight in the center of the rear window or
inserted in the rear spoiler also lights when the
brakes are applied.
o To engage the parking brake, pull the lever
up as far as possible.
o To release the parking brake, pull up the
lever and press the thumb button. Then,
while holding the button in, lower the brake
lever.
gkflhma-1a.p65
56
Type C
B550A02GK
HGK3019
Always engage the parking brake before leaving the car. This also turns on the parking brake
indicator light when the key is in the "ON" or
"START" position. Before driving away, be sure
that the parking brake is fully released and the
indicator light is off.
Type B
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
FRONT DOOR EDGE WARNING
LIGHT
B620A01S-AAT
HOOD RELEASE
57
2. Press the safety hook lever up and lift the
hood.
3. Raise the hood by hand.
B570A01GK-GAT
When closing the hood, slowly close the hood
and make sure it locks into place.
B620A01GK
A red light comes on when the front door is
opened. The purpose of this light is to assist
when you get in or out and also to warn passing
vehicles.
Hood Release Lever
HGK2019
1. Pull the release knob to unlatch the hood.
57
WARNING:
o Always double check to be sure that the
hood is firmly latched before driving
away. If it is not latched, the hood could
open while the vehicle is being driven,
causing a total loss of visibility, which
might result in an accident.
o Do not move the vehicle with the hood
in the raised position, as vision is obstructed and the hood could fall or be
damaged.
HGK2020
gkflhma-1a.p65
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
58
REMOTE FUEL-FILLER LID
RELEASE
B560A02JM-AAT
HGK2018Q
HGK2017
The fuel-filler lid may be opened from inside the
vehicle by pulling up on the fuel-filler lid opener
located on the front floor area on the left side of
the vehicle.
gkflhma-1a.p65
58
NOTE:
If the fuel-filler lid will not open because ice
has formed around it, tap lightly or push on
the lid to break the ice and release the lid. Do
not pry on the lid. If necessary, spray around
the lid with an approved deicer fluid (do not
use radiator anti-freeze) or move the vehicle to a warm place and allow the ice to
melt.
WARNING:
o The fuel cap must be tightened until cap
clicks, otherwise "
" light will
illuminate.
o Gasoline vapors are dangerous. Before
refueling, always stop the engine and
never allow sparks or open flames near
the filler area. If you need to replace the
filler cap, use a genuine Hyundai replacement part.
o If you open the fuel filler cap during high
ambient temperatures, a slight "pressure sound" may be heard. This is normal and not a cause for concern.
Whenever you open the fuel filler cap,
turn it slowly.
o Make sure the fuel filler cap is replaced
and securely seated after fueling. Failure
to replace or fully seat the fuel filler cap
will result in fuel vapors escaping into
the atmosphere and the MIL indicator
illuminating.
o Do not "TOP-OFF" after the first nozzle
shut off when refueling.
o Automotive fuels are flammable/explosive materials. When refueling, please
note the following guidelines carefully.
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
TAIL GATE
59
B540A01F-AAT
o Before touching the fuel nozzle or fuel
filler cap, have one's hands in contact
with metal parts away from the filler neck
to discharge static electricity.
o Do not get back in the vehicle while
refueling. Do not operate anything that
can produce static electricity. Static electricity discharge can ignite fuel vapors
resulting in explosion.
o When using a portable fuel container be
sure to place the container on the ground
while refueling. Static electricity discharge from the container can ignite fuel
vapors causing a fire. While starting refueling contact should be maintained
until the filling is complete.
o Do not use cellular phones around a gas
station. The electric current or electronic
interference from cellular phones can
ignite fuel vapors causing a fire.
o When refueling always shut the engine
off. Sparks by electrical equipment of
the engine can ignite fuel vapors causing a fire. After refueling, check to make
sure the fuel filler cap is securely closed,
and then start the engine.
o Do not smoke or try to light cigarettes
around a gas station. Automotive fuels
are flammable.
gkflhma-1a.p65
59
Remote Tail Gate Release
WARNING:
The tail gate should always be kept completely closed while the vehicle is in motion.
If it is left open or ajar, poisonous exhaust
gases may enter the car resulting in serious
illness or death to the occupants. See additional warnings concerning exhaust gases
on page 2-2.
HGK2012
To open the tail gate without using the key, pull
up the lid release lever located on the driver's
door panel.
To close, lower the tail gate, then press down on
it until it locks. To be sure the tail gate is securely
fastened, always try to pull it up again.
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
60
B540C01F-AAT
B540D01GK-GAT
To Unlock Using the Key
when you close the tailgate
WARNING:
Do not close an open tailgate (rear hatch)
while a person(s) is sitting upright on the
rear seat. The tailgate or tailgate glass may
contact the head of a person sitting upright
on the rear seat. Closing the tailgate onto a
person's head may cause serious injuries,
including death.
HGK2011
HGK1034
To open the tail gate, insert the key and turn it
clockwise to unlock. The tail gate compartment
light illuminates when the tail gate is opened.
HGK227
gkflhma-1a.p65
60
9/8/04, 5:41 PM
FEATURES OF YOUR HYUNDAI
SUN VISOR
STEERING WHEEL TILT LEVER
B580A02A-AAT
HORN
B600A01HP-AAT
61
B610A01S-GAT
(If installed)
Working Zone
Vanity mirror
HGK2050
HGK2119
Your Hyundai is equipped with sun visors to give
the driver and front passenger either frontal or
sideward shade. To reduce glare or to shut out
direct rays of the sun, turn the sun visor down.
A vanity mirror is provided on the back of the sun
visor for the front passenger.
HGK2049
To adjust the steering wheel:
1. Pull the lever toward you and hold it to unlock.
2. Raise or lower the steering wheel to the
desired position.
3. After adjustment, release the lever.
Press the pad on the steering wheel to sound the
horn.
NOTE:
The Supplemental Restraint System (SRS)
label containing useful information can be
found on the front of each sun visor.
WARNING:
WARNING:
Do not attempt to adjust the steering wheel
while driving as this may result in loss of
control of the vehicle and serious injury or
death.
Do not place the sun visor in such a manner
that it obscures visibility of the roadway,
traffic or other objects.
gkflhma-1a.p65
61
9/8/04, 5:41 PM
1FEATURES OF YOUR HYUNDAI
62
LUGGAGE NET
B540D02HP-GAT
(if installed)
Type A
Type B
WARNING:
Avoid eye injury. Do not overstretch. Always keep face and body out of recoil path.
Do not use when strap has visible signs of
wear or damage.
B990A03Y-AAT
Floor Mat Anchor
HGK2126
Some objects can be kept in the net in the
luggage compartment.
Use the luggage net on the floor(If installed) or
at the back of the luggage compartment to
prevent objects from sliding.
CAUTION:
To prevent damage to the goods or the
vehicle, care should be taken when carrying
fragile or bulky objects in the luggage compartment.
gkflhma-1a.p65
62
WARNING:
o Make sure the floor mat is properly placed
on the floor carpet. If the floor mat slips
and interferes with the movement of the
pedals during driving, it may cause an
accident.
o Don't put an additional floor mat on the
top of the anchored mat, otherwise the
additional mat may slide forward and
interfere with the movement of the pedals.
HGK129
When using a floor mat on the front floor carpet,
make sure it attaches to the floor mat anchor in
your vehicle. This keeps the floor mat from
sliding forward.
9/8/04, 5:42 PM
FEATURES OF YOUR HYUNDAI
CRUISE CONTROL
63
B660A01S-AAT
B660B01GK-AAT
(If Installed)
To Set the Cruise Speed
5. To momently increase speed, depress the
accelerator pedal enough for the vehicle to
exceed the preset speed. When you remove
your foot from the accelerator pedal, the
vehicle will return to the speed you have set.
WARNING:
To avoid accidental cruise control engagement, keep the cruise control main switch
off when not using the cruise control.
B660A01GK
The cruise control system provides automatic
speed control for your comfort when driving on
freeways, tollroads, or other noncongested
highways. This system is designed to function
above approximately 25 mph (40 km/h).
gkflhma-1a.p65
63
B660B01GK
1. Push in the cruise control main switch on the
end of the barrel. The "CRUISE" indicator
light in the instrument cluster will be illuminated. This turns the system on.
2. Accelerate to the desired cruising speed
above 25 mph (40 km/h).
3. Push the control switch downward to "SET
(COAST)" and release it.
The "SET" indicator light in the instrument
cluster will illuminate.
4. Remove your foot from the accelerator pedal
and the desired speed will automatically be
maintained.
9/8/04, 5:42 PM
1FEATURES OF YOUR HYUNDAI
64
B660C01GK-AAT
B660D01E-AAT
B660E01E-AAT
To Cancel the Cruise Speed
To Resume the Preset Speed
To Reset at a Faster Speed
1. Push the control switch upward to "RESUME (ACCEL)" position and hold it.
2. Accelerate to desired speed and release the
control switch. While the control switch is
held, the vehicle will gradually gain speed.
B660F02E-AAT
To Reset at a Slower Speed
B660C01GK
To disengage the cruise control system, pull the
control switch toward the steering wheel to
"CANCEL" position.
Additionally, the following actions will disengage
the system :
o Depress the brake pedal.
o Depress the clutch pedal (Manual transaxle).
o Shift the selector lever to "N" position (Automatic transaxle).
o Decrease the vehicle speed lower than the
memorized speed by 9 mph (15 km/h).
o Decrease the vehicle speed to less than 25
mph (40 km/h).
o Release the main switch.
gkflhma-1a.p65
64
B660D01GK
The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch upward to "RESUME (ACCEL)"
position and release it, providing the vehicle
speed is above 25 mph (40 km/h).
B660B01GK
1. Push the control switch downward to "SET
(COAST)" and hold it. The vehicle will decelerate.
2. When the desired speed is obtained, release
the control switch. While the control switch
is pushed, the vehicle speed will gradually
decrease.
9/8/04, 5:42 PM
FEATURES OF YOUR HYUNDAI
AUDIO REMOTE CONTROL
SWITCH
65
B610A01GK-GAT
WARNING:
o Keep the main switch off when not using
the cruise control.
o Use the cruise control system only when
traveling on open highways in good
weather.
o Do not use the cruise control when it
may not be safe to keep the car at a
constant speed, for instance, driving in
heavy or varying traffic, or on slippery
(rainy, icy or snow-covered) or winding
roads or over 6% up-hill or down-hill
roads.
o Pay particular attention to the driving
conditions whenever using the cruise
control system.
o During cruise-control driving with a
manual transaxle vehicle, do not shift
into neutral without depressing the
clutch pedal, or the engine will be
overrevved. If this happens, depress the
clutch pedal or release the main switch.
o With the cruise control engaged, when
the brake pedal is applied, it is normal to
hear the cruise control system deactivate. This is an indication of normal
system operation.
gkflhma-1a.p65
65
(If installed)
WARNING:
o During normal cruise control operation,
when the "SET(COAST)" is activated or
reactivated after applying the brakes,
the cruise control will energize after
approximately 3 seconds. This delay is
normal.
B610A01GK
The steering wheel audio remote control switch
is installed to promote safe driving.
POWER ON/OFF Switch
Press the POWER ON/OFF switch to select
Radio, Tape, CD (compact disc) and CDC
(compact disc changer).
Press the POWER ON/OFF switch once again
to cancel Radio, Tape, CD (compact disc) and
CDC (compact disc changer).
9/8/04, 5:42 PM
1FEATURES OF YOUR HYUNDAI
66
SEEK (UP / ) Switch
Press the SEEK UP (
) switch 1 sec. or more.
1. RADIO mode
When the SEEK UP ( ) switch is pressed, the
unit will automatically tune to the next higher
frequency.
2. TAPE mode
Pressing the SEEK UP ( ) switch will play the
beginning of the next music segment.
3. CD (compact disc)/CDC
(compact disc changer) mode
Press the SEEK UP (
) switch once to skip
forward to the beginning of the next track.
VOL (
) Switch
o Press the VOL (
volume.
o Press the VOL (
volume.
gkflhma-1a.p65
) button to increase
) button to decease
66
9/8/04, 5:42 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:09:08 08:39:22Z
Modify Date                     : 2004:09:17 13:31:49+10:00
Page Count                      : 33
Creation Date                   : 2004:09:08 08:39:22Z
Mod Date                        : 2004:09:17 13:31:49+10:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : owners
Metadata Date                   : 2004:09:17 13:31:49+10:00
Creator                         : owners
Title                           : gkflhma-1a.p65
Has XFA                         : No

EXIF Metadata provided by EXIF.tools