Robertshaw Controls TX0669-0200 Centeron Radar Monitor User Manual 040070A0001 revA

Download:
Mirror Download [FCC.gov]
Document ID	281302
Application ID	ee/yjSGSGSdz8L/6FPuiqA==
Document Description	Page uncluding RF Exposure statement
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.42kB (42767 bits)
Date Submitted	2002-11-05 00:00:00
Date Available	2002-09-24 00:00:00
Creation Date	2002-11-04 11:20:42
Producing Software	Acrobat PDFWriter 4.05 for Windows NT
Document Lastmod	2002-11-04 11:42:28
Document Title	040070A0001_revA.PDF
Document Creator	040070A0001_revA.doc - Microsoft Word
Document Author:	KronauP

Centeron ® Flexible Probe Radar Monitor Instruction Manual
Centeron ® Flexible Probe Radar Monitor Instruction Manual
transmit more frequently than once every four hours and Monitors that are subjected to
prolonged exposure to extreme temperatures will exhibit reduced battery life.
all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
2.3
The following environmental specifications should be observed when installing the
Monitor:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
•
•
•
•
•
2.4.2
Safety and Regulatory
The Monitor is designed to comply with UL Standards for Intrinsically Safe Apparatus
for use in Class I, Division 1, Group D locations. The Monitor conforms to UL 913 and
has been certified to CAN/CSA Standard C22.2 No. 157 and Standard C22.2 No. 94.
•
Environmental Specifications
Operating Temperature Range: -40o C to +80o C (-40°F to +176°F)
The Monitor housing is designed to meet or exceed NEMA 3.
UV life: 10 years exposure to direct sunlight.
Shock: The unit will withstand a one-meter drop test per UL 913.
Chemical Exposure: The Centeron® Radar Monitor is designed for use in water,
ethylene glycol, oil, and common hydrocarbon fuels such as gasoline, gasoline /
ethanol blends, fuel oil, and diesel fuel. Wetted materials in this design include
polypropylene, 316 series stainless steel, Nitrile rubber, brass, and FEP Teflon. For
applications involving fluids other than those noted above contact the Robertshaw
Industrial Products Technical Support Group (refer to Section 5.5) before
installation.
Pressure: The Centeron® Radar Monitor is designed for use on vented storage tanks
only. The maximum pressure inside the tank must not exceed 3 PSI. A special
adapter (sold separately) is required for use in pressurized applications up to 50 PSI.
2.4
2.4.1
Certifications
AVERTISSEMENT: LA SUBSTITUTION DE COMPOSANTS PEUT
COMPROMETTRE LA SÉCURITÉ INTRINSÈQUE.
3.0 Installation
A Quick Installation Guide, which provides an overview of the Radar Monitor
installation procedure, was included with this product.
The following sections of this manual explain in detail the site selection and installation
process:
FCC Notice—Radio Frequency Communications
The Monitor generates and uses radio frequency energy. If not installed and used in
accordance with the manufacturer’s instructions, it may cause interference to radio and
television reception. The Monitor complies with the specifications in Part 15 of the FCC
Rules for Class B Computing Devices.
CAUTION: Robertshaw Industrial Products Division does not support field changes or
modifications to any of the Centeron® Level Monitoring System equipment unless they
are specifically covered in this manual. All adjustments must be made at the factory
under the specific guidelines set forth in our manufacturing processes. Any modification
to the equipment will void the manufacturer’s warranty and could void the user’s
authority to operate the equipment and render the equipment in violation of FCC Part 15,
Subpart C, 15.247.
CAUTION: This device is required to comply with FCC RF exposure requirements for
mobile transmitting devices. The FCC requires that the antenna(s) used for this
transmitter must be installed to provide a separation of at least 20 cm (8 inches) from
Robertshaw Industrial Products
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC
SAFETY.
Page 2
3.1
Radio Installation Guidelines
The Centeron® Radar Monitor contains sensitive measurement circuitry and a radio
transmitter. Large metal objects such as buildings and vehicles may affect the
transmission of radio signals. Electrical equipment may produce electronic noise that
could adversely affect signal quality.
§
Direct line of sight between the Centeron® Monitor and Controller will provide
optimum radio reception.
§
The Centeron® Monitor and Controller can communicate at distances up to one mile
under optimum line-of-sight conditions.
§
When obstructions such as walls, buildings, and vehicles exist between the
Centeron® Monitor and Controller the distance between these units should be limited
to less than 500 feet.
Robert shaw Industrial Products
Page 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : 040070A0001_revA.doc - Microsoft Word
Create Date                     : 2002:11:04 11:20:42
Title                           : 040070A0001_revA.PDF
Author                          : KronauP
Producer                        : Acrobat PDFWriter 4.05 for Windows NT
Modify Date                     : 2002:11:04 11:42:28-05:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools