Rockwell Sonicrafter Devicenet 1771 Sdn Users Manual 6.5.132, PLC 5 Scanner User

2015-02-06

• 1771-6.5.132, PLC-5 deviceNet Scanner User Manual
• Important User Information
• European Communities (EC) Directive Compliance
• About This User Manual
  • Introduction
  • Contents
  • Audience
  • The Example Application
  • Common Techniques Used in This Manual
  • Where to Find More Information
  • Terminology
  • Rockwell Automation Support
• Table of Contents
• 1 - Before You Begin
  • What This Chapter Contains
  • What You Need to Know
  • What Your 1771-SDN Module Does
  • Address Density and Discrete I/O
  • Communicating with Your Devices
  • Communicating with Your PLC-5 Processor
  • What 1771-SDN Module Data Tables Are and What They Do
  • RSNetWorx Software as a Configuration Tool
  • What’s Next?
• 2 - Planning Your Configuration and Data Mapping Your Devices
  • What You Need to Know
  • Beginning the Process
  • The Example Network
  • What’s Next?
• 3 - Hardware Setup
  • What This Chapter Contains
  • Installing the 1770-KFD Interface Module
  • Installing the PLC-5 Processor
  • Installing the 1785-ENET Ethernet Module
  • Installing the 1771-SDN Scanner Module
  • Installing the RediSTATION Operator Interface
  • Installing the Series 9000 Photoeye
  • How Your Example System Will Look
  • What’s Next?
• 4 - Configuring the DeviceNet Network
  • What This Chapter Contains
  • Installing the Software
  • Using RSLinx to Configure the DeviceNet Driver
  • Using RSNetWorx for DeviceNet to Configure the Scanlist
  • What’s Next?
• 5 - Communicating with DeviceNet from Another Network
  • What This Chapter Contains
  • Where to Find More Information
  • Communicating with DeviceNet from a ControlNet Network
  • Communicating with DeviceNet from an Ethernet Network
  • Communicating with DeviceNet from a DH+ Network
  • What’s Next?
• 6 - Creating and Running the Example Application Program
  • What This Chapter Contains
  • Installing the Software
  • Creating the Example Application Program
  • Downloading and Running the Program
  • What’s Next?
• 7 - Troubleshooting
  • What This Chapter Contains
  • Module Status Indicator
  • Network Status Indicator
  • Node/Error Code Indicator
• A - 1785-ENET Module Channel Configuration
  • Configuring the Communications Channel
• B - Installing and Configuring the ControlNet Communications Driver
  • Installing the 1784-KTCX15 Communication Interface Card
• C - Installing and Configuring the DH+ Communications Driver
  • Installing the 1784-KTX Communication Interface Card
  • Configuring the 1784-KTX Communications Driver
• D - Data Map Example
  • Example Input Mapping Scheme
  • Example Output Mapping Scheme
• Index
• Back Cover