Roland At800 Users Manual AT 800_r_e

(Division Select). fig.RC-03.eps You can open the Division Select screen by touching the Division name indication (p. 199) in the Rhythm Customize screen. This is played at the end of a song. You can make a song more lively or more restrained by increasing or reducing played parts by Divisions. You can also modify a song by changing the voice of the parts in the Divisions. 1. 3. 4. Touch a Division name to select the Division. fig.RC-04.eps Bring up the Rhythm Customize screen (p. 199). fig.RC-01.eps This returns you to the Rhythm Customize screen. The name of the selected division now appears in the Rhythm Customize screen. You can touch < sounds. 200 > to hear how the Rhythm AT-800_e.book 201 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Loading the Rhythm Use the Rhythm Customize function to select the Rhythm you want to use as the base for the Rhythm you are creating. 1. 4. Touch Group/Media < Rhythm group. >< > to select fig.RC-06.eps Bring up the Rhythm Customize screen (p. 199). fig.RC-01.eps 5. Touch < > < > to switch the screen, then touch a Rhythm name to select the Rhythm. fig.RC-05-2.eps 2. Touch < > (Utility). The Utility screen appears. fig.RC-02.eps You can touch to hear how the Rhythm sounds. 6. 3. Touch . The Rhythm Load screen appears. fig.RC-05-1.eps Touch Division < > < > to select the Division you want to call up. Selecting “ALL” calls up all of the Divisions. 7. Use the Variation buttons of the panel to change the arrangement of the accompaniment. 8. Touch . The Rhythm is called up, and the Rhythm Customize screen returns to the display. Creating Original Accompaniment Rhythms 201 AT-800_e.book 202 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Making the Division Settings Independent “Drum Set,” “Beat,” and “Volume” settings can be made for each Division. 1. Changing the Drum Set 4. Touch the value set for Drum Set. fig.RC-12-1.eps Bring up the Rhythm Customize screen (p. 199). fig.RC-10.eps 5. 6. Touch < >< > to change the setting. Touch . The Division Options screen reappears. Changing the Beat 2. Touch < > (Utility). The Utility screen appears. fig.RC-11.eps 3. Touch

(Division Options). The Division Options screen appears. 7. Touch the Beat setting. fig.RC-12-2.eps 8. 9. Touch < >< > to change the setting. Touch . The Division Options screen reappears. fig.RC-12.eps Changing the Volume 10.Touch the Volume setting. fig.RC-12-3.eps 11.Touch < > < 12.Touch . > to change the setting. The Division Options screen reappears. 202 AT-800_e.book 203 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Creating the User Rhythm Deleting the Rhythm in a Selected Measure Editing the Rhythm 1. Bring up the Rhythm Customize screen (p. 199). 2. Touch (to copy the selected measure). Edit the internal Rhythm. Page What you can do Copying the Rhythm in a Selected Measure p. 203 Deleting the Rhythm in a Selected Measure p. 203 Erasing Sounds p. 204 Adding Sounds p. 204 Altering Voices p. 205 Changing the Velocity p. 205 Moving Sounds p. 205 fig.RC-10.eps Copying the Rhythm in a Selected Measure The following screen appears. fig.RC-14.eps 1. Bring up the Rhythm Customize screen (p. 199). 2. Touch (to copy the selected measure). fig.RC-10.eps To cancel operation, touch . 3. Touch . The selected measure is deleted. The following screen appears. fig.RC-13.eps Creating Original Accompaniment Rhythms To cancel operation, touch . 3. Touch . Copies the Rhythm in the displayed measure and adds it to the end of that measure. 203 AT-800_e.book 204 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Editing the Sounds Erasing Sounds You can add and erase sounds, alter voices, and change the velocity. 3. 1. Bring up the Rhythm Customize screen (p. 199). Touch < >< > to select the point where you want to erase the sound. fig.RC-16.eps fig.RC-10.eps 2. Touch the point on the screen where the sound you want to edit is located. When you touch the screen, a line appears at the point you touch. By holding your finger to the screen and moving it to the left or right, you can have the line move along with your finger. 4. When you touch , the selected sound is erased. Adding Sounds 5. fig.RC-15-2.eps Touch < >< > to select the point where you want to add the sound. fig.RC-16.eps The information on the location (Measure: Beat: Tick) of the line on the screen is displayed. When you remove your finger from the screen, the Note Edit screen opens, and the note positioned at the line in the Rhythm Customize screen is displayed. fig.RC-16.eps You can touch < > to open the Utility screen, and then touch in the Utility screen to open the Note Edit screen. 204 6. When you touch , the new sound is added after the selected sound. AT-800_e.book 205 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Altering Voices Moving Sounds 7. Touch < >< > to select the sound whose voice you want to change. 13.Touch < 8. Touch the Instrument name. 14.Touch the “Meas Beat Tick” setting. fig.RC-17.eps >< you want to move. > to select the sound The note-location display uses “Measure: Beat: Tick” as the format. A tick is a unit of time that’s shorter than a beat. fig.RC-16.eps 9. Touch <-8> <-1> <+1> <+8> to switch the voice. 15.Touch <-30> <-1> <+1> <+30> to move the Changing the Velocity 10.Touch < >< > to select the sound whose velocity you want to change. 11.Touch the Velocity setting. fig.RC-18.eps sound. With the Rhythm Customize function, note locations are expressed in terms of “Measure: Beat: Tick.” One tick is the smallest unit used in indicating the location of the note, and there are 120 ticks in a quarter note. Typical notes might be indicated as shown below. Quarter Note 8th Note fig.RC_tick-01.eps 1: 1: 0 1: 2: 0 1: 3: 0 1: 4: 0 1: 1: 0 1: 1: 60 1: 2: 0 1: 2: 60 (1 measure: 1 beat: 0 tick) 8th Note Triplet 16th Note fig.RC_tick-03.eps, fig.RC_tick-02.eps 3 1: 1: 0 1: 1: 40 1: 1: 80 1: 1: 0 1: 1: 30 1: 1: 60 1: 1: 90 velocity. The ticks for each note have the following characteristics. Note Tick Quarter Note 0 (Every 120 ticks) 8th Note 0, 60 (Every 60 ticks) 8th Note Triplet 0, 40, 80 (Every 40 ticks) 16the Note 0, 30, 60, 90 (Every 30 ticks) 205 Creating Original Accompaniment Rhythms 12.Touch <-10> <-1> <+1> <+10> to change the AT-800_e.book 206 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Changing and Deleting the Instruments Used 4. Touch . The following screen appears. You can change an instrument used in a Rhythm and replace it with another instrument. 1. Bring up the Rhythm Customize screen (p. 199). 2. Touch the section in the Rhythm Customize screen where the instrument names are displayed. fig.RC-10.eps 5. Touch < > < > to switch the screen, then touch the instrument name. The following screen appears. The Instrument Edit screen appears. fig.RC-20.eps To cancel operation, touch . 6. If you want to change the instrument, touch . The instrument is changed. You can open Instrument Edit screen using the following procedure. 1. Touch < > (Utility). The Utility screen appears. fig.RC-11.eps Deleting an Instrument You can delete an instrument used in a Rhythm. When an instrument is deleted, all of the sounds using that instrument are deleted from the Rhythm. 7. Touch < >< > in the screen to select the name of the instrument you want to delete. 8. Touch on the Instrument Edit screen. fig.DelInstrumentOK?.eps 2. Touch (Instrument Edit). The Instrument Edit screen appears. Changing the Instrument Used 3. Touch < >< > in the screen to select the name of the instrument you want to change. 206 To cancel operation, touch . 9. If you are sure that you wish to delete the instrument, touch . The selected instrument is deleted. AT-800_e.book 207 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Deleting Rhythms You Have Created 3. Touch . The Rhythm Save screen appears. fig.RC-19.eps This deletes User Rhythms created by partially editing the internal Rhythms. 1. Bring up the Rhythm Customize screen (p. 199). 2. Touch < > (Utility). The Utility screen appears. fig.RC-11.eps 4. Touch . The Rename screen appears. fig.RC-24.eps 3. Touch . The following screen appears. fig.RC-23.eps 5. Touch the character select button ( to switch among uppercase/lowercase/ symbols. ) Touch the character select button repeatedly to cycle through the available choices, like this: uppercase → lowercase → symbols → uppercase... To cancel operation, touch . 4. 6. The following characters can be selected. If you are sure that you wish to delete the Rhythm, touch . Saving the User Rhythm 2. ABCDEFGHIJKLMNOPQR STUVWXYZ Lowercase abcdefghijklmnopqrstu vwxyz Symbols !"#%&'()*+,-./:=?^_01 23456789 Delete a character. Bring up the Rhythm Customize screen (p. 199). Touch < Uppercase Insert a space. Move the cursor (the symbol that indicates the location at which characters will be input) to left or right. > (Utility). The Utility screen appears. To cancel operation, touch . 7. When you’re done making the settings, touch . 207 Creating Original Accompaniment Rhythms Changing the Name of a User Rhythm (Rename) 1. Touch the screen to specify the desired character. AT-800_e.book 208 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Creating Original Accompaniment Rhythms Saving User Rhythms to the User Memory or USB Memory You can take User Rhythms created with the Rhythm Customize function and save them in the ATELIER’s User memory and USB memory. 5. Touch < >< > to select the number of the save destination. Numbers which have not been used in the saving operation will be displayed as “- - - - -.” fig.RC-19-2.eps To call up Rhythms saved in User memory, press the [User] button. 1. Bring up the Rhythm Customize screen (p. 199). 2. Touch < > (Utility). The Utility screen appears. To cancel the save, touch to close the Rhythm Save screen. fig.RC-11.eps You can change the name of a Rhythm by touching . 6. Touch . The User Rhythms are saved to the User memory or to USB memory. You can save Rhythms after changing the tempo by touching the Tempo [ ][ ] button. 3. If the following screen appears Touch . The Rhythm Save screen appears. fig.RC-19.eps The following screen appears if you select a number to which a Rhythm has already been saved and then touch . fig.OverwriteRhythmOK?.eps If you wish to overwrite the Rhythm 4. Touch < > < destination. > to determine the save 1. Touch . The Rhythm will be rewritten. Select “Ext Memory” to save the data in USB memory, or “Favorites” to save it in user memory. If you wish to save new data instead of updating the Rhythm Select “Disk” to save the data in floppy disk. 1. Touch . Rewriting of the Rhythm will be canceled. 2. In the Rhythm Save screen, select the number that is displayed as “-----” (a number that currently does not contain Rhythm data). 3. Touch . When saving is complete, the saved User Rhythm name will be displayed. 208 AT-800_e.book 209 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Adjusting How the Instrument Responds Turning Aftertouch On/Off This switches the aftertouch setting for the Upper keyboard. Aftertouch applies vibrato when additional pressure is placed on the keys that are being played. Aftertouch can only be enabled for the Upper keyboard. NOTE 1. Adjusting the Depth of Aftertouch This adjusts the depth of the Aftertouch effect. Aftertouch can only be enabled for the Upper keyboard. NOTE 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Upper Keyboard screen appears. Touch on the Main screen. The Sound/Keyboard screen appears. 3. fig.VoiceList.eps Touch < > < Sensitivity. > to display the After Touch fig.09-01.eps 2. Touch . 3. Touch < >< > to display the After Touch. 4. Touch the After Touch Sensitivity value (1–10). fig.09-02.eps fig.09-01.eps 4. Touch the After Touch setting to switch between “ON” and “OFF.” 5. 6. Touch . Please note that not all the voices on the Upper keyboard are responsive to Aftertouch, even if the feature is set to ON. For details, refer to the Voice List (Appendix: separate booklet). 209 Various Other Settings Higher settings of this value will allow deeper vibrato to be applied when you apply pressure to the keyboard. ON, OFF NOTE > to edit the value. 1–10 Setting Touch . >< Setting Each time you touch the After Touch setting, it will alternate between “ON” and “OFF.” 5. Touch < AT-800_e.book 210 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Adjusting the Initial Touch Sensitivity This adjusts the amount of the Initial Touch effect applied. Initial Touch is a function that translates the force used in playing the keys into a directly proportional amount of volume. 1. Changing the Pedalboard Polyphony You can set the Bass Pedalboard to play simultaneous multiple notes or single notes only. 1. Touch on the Main screen. Touch on the Main screen. The Sound/Keyboard screen appears. The Sound/Keyboard screen appears. 2. 2. Touch either , or . Description Setting To change the initial touch setting of the Upper part Upper Touch < The Pedalboard screen appears. 3. Touch < Mode. >< > to display the PedalBass fig.09-04.eps To change the initial touch setting of the Lower part Lower 3. Touch . >< > to display the Initial Touch. fig.09-03.eps 4. 4. Touch the Initial Touch value (OFF, 1–10). 5. Touch < >< 6. Setting > to edit the value. 1–10 Initial Touch is on. Striking the keys more forcefully will produce correspondingly louder sounds. The change in volume when the keys are played forcefully increases as the value is increased. OFF Initial Touch is off. Volume remains constant regardless of how hard you play. Touch . 210 Each time you touch the PedalBass Mode setting, it will alternate between “MONOPHONIC” and “POLYPHONIC.” Description Setting Touch the PedalBass Mode setting to switch between “MONOPHONIC” and “POLYPHONIC.” 5. Description MONOPHONIC Only single notes can be played. POLYPHONIC Multiple notes can be played. Touch . AT-800_e.book 211 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Performance Function Settings Selecting the Keyboard Affected by the Damper Pedal You can specify which keyboard will be affected when you press the Damper (Sustain) pedal. 1. Touch . The Controller screen appears. 3. Specify how the Expression Pedal will function when your performance is being recorded and when ATELIER song files are being played back. Function During Recording Touch on the Main screen. The Sound/Keyboard screen appears. 2. Changing the Function of the Expression Pedal Touch < Pedal. >< > to display the Damper Specify whether Expression Pedal operations will be recorded or not while your performance is being recorded. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Controller screen appears. fig.09-08.eps 3. Touch < (Rec). >< > to display the Exp. Src fig.09-10.eps 4. Touch the Damper Pedal setting to switch between “to UPPER” and “to LOWER.” Each time you touch the Damper Pedal setting, it will alternate between “to UPPER” and “to LOWER.” 5. Setting Description to UPPER The effect is applied to the voices played on the Upper keyboard. to LOWER The effect is applied to the voices played on the Lower keyboard. 4. Touch the Exp. Src (Rec) setting to switch between “PEDAL” and “COMPOSER.” Each time you touch the Exp. Src (Rec) setting, it will alternate between “PEDAL” and “COMPOSER.” Setting Touch . PEDAL Expression Pedal movements will be recorded. The previous recording will be erased as new songs are recorded. COMPOSER Expression Pedal movements will not be recorded. The previous data will remain without being erased. Touch . 211 Various Other Settings 5. Description AT-800_e.book 212 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Function During Playback You can specify whether or not the Expression Pedal will function while ATELIER song files are being played back. 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . Choosing the Keyboard for which Pitch Bend and Vibrato will Apply This setting determines which keyboard will be controlled by the Pitch Bend/Vibrato lever. 1. Touch on the Main screen. The Sound/Keyboard screen appears. The Controller screen appears. 3. Touch < (Play). >< > to display the Exp. Src fig.09-10.eps 2. Touch . The Controller screen appears. 3. Touch < Vibrato. >< > to display the Bender/ fig.09-10.eps 4. Touch the Exp. Src (Play) setting. fig.09-12.eps 4. Touch the Bender/Vibrato setting. fig.09-13.eps 5. Touch < >< Setting Description PEDAL +COMPOSER The Expression Pedal will function. Expression Pedal recording within the song file will also be effective. COMPOSER The Expression Pedal will not function. The Expression Pedal recording within the song file will be effective. PEDAL 6. Touch . 212 > to change the setting. 5. The Expression Pedal will function. The Expression Pedal recording within the song file will be ignored. 6. Touch < >< > to change the setting. Setting Description to UPPER The effect is applied to the voices played on the Upper keyboard. to LOWER The effect is applied to the voices played on the Lower keyboard. to PEDAL The effect is applied to the voices played on the Pedalboard. Touch . AT-800_e.book 213 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Changing the Pitch Bend Range This setting allows you to choose the maximum amount of Pitch change (range) permissible when using Pitch Bend. The range can be set anywhere between 1–12 (in semitone units; with a maximum of one octave). 1. Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . Adjusting the Sensitivity of the D Beam Controller You can adjust the sensitivity of the D Beam controller. Increasing this setting will make the D Beam controller more responsive. The sensitivity of the D Beam controller can vary depending on the brightness of the surroundings. If it does not operate as you expect, please readjust the sensitivity. 1. The Controller screen appears. 3. Touch < Range. >< > to display the Pitch Bend Touch on the Main screen. The Sound/Keyboard screen appears. 2. Touch . The Controller screen appears. fig.09-14.eps 3. Touch < > < Sensitivity. > to display the D Beam fig.09-14.eps 4. Touch the Pitch Bend Range setting. fig.09-15.eps 4. Touch the D Beam Sensitivity setting. fig.09-15.eps 5. Touch < >< > to change the setting. Setting 1–12 (semitone steps) Touch < >< Setting Touch . NOTE Drums/SFX is fixed at one octave range, regardless of this setting. > to change the setting. Various Other Settings 6. 5. 1–10 6. Touch . This setting remains stored in memory even while power is turned off. 213 AT-800_e.book 214 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Rhythm Settings Changing the Intro Countdown Sound (Count Down Sound) Turning Chord Hold On/Off You can change the sound that is used for the count played at the end of the intro with the Intro Countdown function (p. 88). The Chord Hold function can be switched ON/OFF. When Chord Hold is ON, the Automatic Accompaniment will continue playing even when you lift your hand from the key to play a new chord. 1. 1. 2. Touch on the Main screen. The Rhythm screen appears. Touch < 3. > (Utility). > (Utility). Touch . The Rhythm Options screen appears. The Utility screen appears. 3. Touch < The Utility screen appears. The Rhythm screen appears. 2. Touch on the Main screen. 4. Touch . The Rhythm Options screen appears. Touch < Sound. >< > to display the Count Down fig.02-11.eps 4. Touch < >< > to display the Chord Hold. fig.02-11.eps 5. 5. Touch the Chord Hold setting to switch between “ON” and “OFF.” Each time you touch the Count Down Sound setting, it will alternate between “VOICE” and “STICK.” Each time you touch the Chord Hold setting, it will alternate between “ON” and “OFF.” Setting 6. ON OFF When you release the keys that you played in the Lower keyboard, the Automatic Accompaniment will stop (be muted). Only the Rhythm (drum) performance will continue. Touch . 214 Description Setting Description The Automatic Accompaniment determined by the chord played on the Lower keyboard is held (even if you release the keys). Touch the Count Down Sound setting to switch between “VOICE” and “STICK.” 6. VOICE Human voice count (One, two, three...) STICK Stick sound count Touch . AT-800_e.book 215 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Preventing Rhythm Tempos from Switching Automatically You can prevent Rhythm tempos from switching automatically when you switch Rhythms. 1. Touch on the Main screen. The Rhythm screen appears. Changing the Operation of [Intro], [Ending] Button and the Fill In Button You can change the operation of the Fill In [Auto] button, [Break] button, [Intro] button, and [Ending] button so that they work in the same way as on the S-series. 1. Touch on the Main screen. The Rhythm screen appears. 2. Touch < > (Utility). 2. The Utility screen appears. 3. Touch . Touch < > < > to display the Auto Std Tempo (Auto Standard Tempo). fig.02-11-2.eps 5. 3. Touch . The Rhythm Options screen appears. 4. Touch < Mode. >< > to display the Rhythm fig.02-11-2.eps Touch the Auto Std Tempo setting to switch between “ON” and “OFF.” 5. Touch the Rhythm Mode setting to switch between “ORIGINAL” and “S-SERIES.” Each time you touch the Rhythm Mode setting, it will alternate between “ORIGINAL” and “S-SERIES.” Each time you touch the Auto Std Tempo setting, it will alternate between “ON” and “OFF.” Setting Description ORIGINAL The function of the Fill In [Auto] button, [Break] button, [Intro] button, and [Ending] button will not change. Description Setting ON Switching the Rhythm while the Rhythm is stopped automatically changes the tempo settings to those in the new Rhythm. OFF The tempo settings are not changed automatically when the Rhythms are changed. The function of the Fill In [Auto] button, [Break] button, [Intro] button, and [Ending] button will change. S-SERIES [Break] button → Fill In [To Original] button Touch . This setting remains stored in memory even while power is turned off. Fill In [Auto] button → Fill In [To Variation] button [Intro] button → [Break] button [Ending] button → [Intro/Ending] button 6. Touch . This setting remains stored in memory even while power is turned off. 215 Various Other Settings 6. > (Utility). The Utility screen appears. The Rhythm Options screen appears. 4. Touch < AT-800_e.book 216 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Placing the Panel Overlay Sheet If you’ve set Rhythm Mode to “S-SERIES,” you can place the panel overlay sheet included with the ATELIER on the panel so that the button functions will be easy to see. 1. Place the panel overlay sheet as shown in the illustration below. Starting the Rhythm (if Rhythm Mode is “S-SERIES”) Starting with an Added Intro 1. Press the [Intro/Ending] button. The Intro is played and the Rhythm starts. While the Intro is playing, the [Intro/Ending] button indicator will light, until the Intro ends then the button indicator will go dark. Making the Intro Short 1. Press the Fill In [To Variation] or Fill In [To Original] button. [Start/Stop] button indicator will blink. The indicator for the Fill In [To Variation] or [To Original] button will blink. On the panel overlay sheet are printed the names of the buttons for when Rhythm Mode is set to “S-SERIES.” Button 2. Press the [Start/Stop] button. A short Intro is played and the Rhythm starts. Description Fill In [To Variation] button A fill-in (p. 89) will be played, and then an elaborate Rhythm pattern will play. Fill In [To Original] button A fill-in (p. 89) will be played, and then a basic Rhythm pattern will play. [Break] button Stop the Rhythm at the end of that measure (Break). [Intro/Ending] button This lets you start the Rhythm with an intro or stop the Rhythm with an ending. Starting Without an Intro 1. Press the [Start/Stop] button. The Rhythm starts without an Intro being played. Stopping the Rhythm (if Rhythm Mode is “S-SERIES”) Stopping with an Ending 1. Press the [Intro/Ending] button. An Ending is played, then the Rhythm stops. While the Ending is playing, the [Intro/Ending] button indicator will light, until the Ending finishes the button indicator will be turned off. Making the Ending Short 1. Press the [To Variation] or [To Original] button, and then press the [Start/Stop] button. A short Ending is played, then the Rhythm stops. Stopping without an Ending 1. Press the [Start/Stop] button. The Rhythm stops without an Ending being played. 216 AT-800_e.book 217 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Registration Settings Changing the Timing at Which Arranger Settings are Recalled Changing the Timing at Which Transposition Settings are Recalled You can specify how the transpose setting will be recalled when you press a Registration button. You can specify how the settings related to Rhythm performances and Automatic Accompaniment will be recalled when you press a Registration button. 1. 1. 2. Touch on the Main screen. The Registration Load screen appears. Touch < 3. > (Utility). Touch < > (Utility). The Utility screen appears. The Registration Load screen appears. 2. Touch on the Main screen. Touch . The Registration Options screen appears. The Utility screen appears. fig.03-07.eps 3. Touch . The Registration Options screen appears. fig.03-07.eps 4. 4. Each time you touch the Trans. Update setting, it will alternate between “DELAYED” and “INSTANT.” Touch the Arranger Update setting to switch between “DELAYED” and “INSTANT.” Each time you touch the Arranger Update setting, it will alternate between “DELAYED” and “INSTANT.” Setting Description DELAYED Settings related to Rhythm performances and Automatic Accompaniment will be recalled when you hold a Registration button for several seconds. If you quickly press the Registration button, only the panel settings (voice, etc.) that are not related to Rhythm and Automatic Accompaniment will be updated. 5. 5. Setting Description DELAYED Transpose settings will be recalled when you hold a Registration button for several seconds. INSTANT Transpose setting will be recalled the instant you press a button along with all other panel settings. Touch . This setting remains stored in memory even while power is turned off. Touch . This setting remains stored in memory even while power is turned off. 217 Various Other Settings INSTANT Settings related to Rhythm performances and Automatic Accompaniment will be recalled the instant you press a button along with all other panel settings. Touch the Trans. Update (Transpose Update) setting to switch between “DELAYED” and “INSTANT.” AT-800_e.book 218 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Composer Settings Switching the Display of Lyrics On or Off Some music files have Lyrics included and these Lyrics can be displayed on the screen. You can turn on or off the lyrics display of such music files. 1. 4. 1. Touch on the Main screen. The Rec/Play screen appears. 2. Touch < > (Utility). The Utility screen appears. Touch < > (Utility). The Utility screen appears. 3. SMF music files or a performance that you yourself recorded can be transposed for playback. Touch on the Main screen. The Rec/Play screen appears. 2. Changing the Key When Playing Back Songs (Playback Transpose) 3. Touch . The Rec/Play Options screen appears. Touch . The Rec/Play Options screen appears. 4. Touch < fig.09-16.eps >< > to display the Lyrics. Touch < > < Transpose. > to display the Playback fig.09-16.eps 5. 5. Touch the Lyrics setting to switch between “ON” and “OFF.” Touch the Playback Transpose setting. fig.09-17.eps Touch the setting to toggle the display of lyrics “ON” (visible) or “OFF” (hidden). 6. Touch . NOTE If you press a voice select button while playing back music files that contains lyrics, the display screen will switch, and the lyrics will no longer be displayed. To re-display the lyrics, touch on Rec/Play screen once again. This setting remains stored in memory even while power is turned off. 6. Touch < >< > to change the setting. The key is transposed by one semitone each time the < > or < > key is touched. Setting -6–0–5 (semitone steps) 7. 218 Touch . AT-800_e.book 219 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Changing the Metronome Setting Adjusting the Metronome Volume You can change the way in which the metronome will sound. You can adjust the volume of the metronome. 1. 1. Touch on the Main screen. The Rec/Play screen appears. 2. Touch < The Rec/Play screen appears. 2. > (Utility). The Utility screen appears. 3. 3. Touch . Touch < >< Touch < > (Utility). The Utility screen appears. The Rec/Play Options screen appears. 4. Touch on the Main screen. > to display the Metronome. Touch . The Rec/Play Options screen appears. 4. fig.09-16.eps Touch < > < > to display the Metronome Vol. (Metronome Volume). fig.09-19.eps 5. Touch the Metronome setting. 5. fig.09-18.eps Touch Metronome Vol. setting. fig.09-20.eps 6. Touch < >< Setting Description OFF Not heard at all REC Heard only while recording ON Heard constantly Touch . 6. Touch < >< > to change the setting. Setting 1–10 Various Other Settings 7. > to change the setting. Increasing the value will raise the volume of the metronome. 7. Touch . 219 AT-800_e.book 220 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Changing the Sound of the Metronome You can choose one of 4 different sounds for the metronome. 1. Touch on the Main screen. The Rec/Play screen appears. Setting the Beat This setting determines the beat to be used when recording performance songs. 1. Touch on the Main screen. The Rec/Play screen appears. 2. Touch < > (Utility). 2. The Utility screen appears. Touch < > (Utility). The Utility screen appears. 3. Touch . The Rec/Play Options screen appears. 3. Touch . The Rec/Play Options screen appears. 4. Touch < Sound. >< > to display the Metronome 5. 4. Touch < >< > to display the Beat. fig.09-19.eps fig.09-19.eps Touch the Metronome Sound setting. fig.09-21.eps 5. Touch the Beat setting. The time signature setting screen appears. fig.09-19-2.eps 6. Touch < >< Setting 7. > to change the setting. Description CLICK&BELL Conventional metronome sound ELECTRONIC Electronic metronome sound VOICE ENG. Human voice (English) VOICE JPN. Human voice (Japanese) Touch . This setting remains stored in memory even while power is turned off. 220 6. Touch the time signature that you wish to set. 7. Touch . If you’re using Rhythm performance or Automatic Accompaniment, the time signature will be specified automatically. NOTE You cannot change the beat of previously recorded songs. AT-800_e.book 221 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Setting the Type of CD To Be Played Back 6. Touch < Auto Type A Touch on the Main screen. Type B The Rec/Play screen appears. 2. Touch < > (Utility). STEREO The Utility screen appears. 3. Touch . The Rec/Play Options screen appears. 4. Touch < Type. >< > to display the CD/Audio NOTE 7. > to change the setting. Description Setting The ATELIER may be unable to correctly recognize the type of CD being used. In such instances, you can specify the type of CD manually. 1. >< The CD type is detected automatically. General CDs for Player Piano contain audio and MIDI data, and the data format may vary from one CD to the next. If the CD’s data format does not match the ATELIER’s settings, a “beep” will sound. Commercial Audio CD (CDs other than those designed for use with the piano player piano) Note that certain commercially available CDs cannot be played back on the ATELIER. Touch . fig.09-16.eps 5. Touch the CD/Audio Type setting. fig.09-18.eps Various Other Settings 221 AT-800_e.book 222 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Adjusting the Timing of a Player Piano CD’s Piano sound and accompaniment With some player piano CDs, the piano and accompaniment sounds may not be synchronized properly. In such instances, you can adjust the timing of the piano sounds so that they are in time with the accompaniment. 1. Touch on the Main screen. The Rec/Play screen appears. Other Settings Adjust the Standard Pitch (Master Tune) The basic pitch of an instrument is generally considered as the pitch of the middle A note. The “Master Tune” parameter lets you adjust this basic pitch to match the pitch of any other instruments that are playing together with the ATELIER. 1. Touch on the Main screen. The System screen appears. 2. Touch < > (Utility). The Utility screen appears. 2. Touch < >< > to display the Master Tune. fig.09-24.eps 3. Touch . The Rec/Play Options screen appears. 4. Touch < Sync. >< > to display the CD/Audio fig.09-16.eps 3. Touch the Master Tune setting. fig.09-25.eps 5. Touch the CD/Audio Sync setting. fig.09-18.eps 4. Touch < >< > to change the setting. Setting 415.3Hz–466.2Hz (0.1 Hz units) 6. 5. Touch < >< > to change the setting. Setting 0–100 7. Touch . 222 Touch . By touching < (440.0 Hz). >, you can restore the default setting This setting remains stored in memory even while power is turned off. AT-800_e.book 223 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Adjusting the Mic Echo You can adjust the mic echo that will apply to a connected microphone. Connecting the Microphone (p. 24) Enabling Transmission of PC Numbers Transmission of PC (Program Change) numbers can be switched ON/OFF when a Registration is selected. 1. Touch on the Main screen. The System screen appears. 1. 2. Touch on the Main screen. The System screen appears. 2. Touch < fig.00-37.eps >< > to display the Mic Echo. Touch < Switch. >< > to display the Send PC fig.09-24.eps 3. 3. Touch the Mic Echo setting. fig.09-26.eps Touch the Send PC Switch setting to switch between “ON” and “OFF.” Each time you touch the Send PC Switch setting, it will alternate between “ON” and “OFF.” Description Setting 4. ON PC numbers are transmitted OFF PC numbers are not transmitted Touch . This setting remains stored in memory even while power is turned off. 4. Touch < >< > to change the setting. Setting 0–12 5. Touch . This setting remains stored in memory even while power is turned off. Various Other Settings 223 AT-800_e.book 224 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Setting the PC Number MIDI IN Mode You can specify the Program Change number that will be transmitted from MIDI Out connector when a Registration is selected. 1. Touch on the Main screen. The System screen appears. 2. Touch < > < > to display the Bank MSB (Bank Select MSB), Bank LSB (Bank Select LSB), or PC Number (Program Change Number). fig.00-37.eps This instrument contains two sound generators: one for GM2/ GS data playback and one for keyboard performance. Normally, data received at the MIDI In connector will control only the sound generator for GM2/GS data playback. However by changing the MIDI IN Mode setting, you can also control the keyboard sound generator from MIDI In. 1. Touch on the Main screen. The System screen appears. 2. Touch < >< > to display the MIDI IN Mode. fig.09-24.eps 3. Touch either , , or setting. fig.09-28.eps 3. Touch the MIDI IN Mode setting to switch between “MODE 1” and “MODE 2.” Each time you touch the MIDI IN Mode setting, it will alternate between “Mode 1” and “Mode 2.” Description Setting 4. Touch < >< MODE 2 Channels 5 through 10 and Channels 12, 14, 15 are transmitted to the GS sound generator, and all other channels are transmitted to the keyboard sound generator. Channel Setting MODE 1 MODE 2 1 GS Solo 2 GS Pedal/GS * Bank MSB 0–127 3 GS Lower Bank LSB 0–127 4 GS Upper PC Number 1–128 5–10 GS GS 11 GS Drums/SFX 12 GS GS 13 GS Manual Percussion 14–15 GS GS 16 GS Control Touch . 224 Control the instrument as a GS sound generator > to change the setting. Menu 5. MODE 1 AT-800_e.book 225 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings * When the pedal part button is ON, data received at the MIDI In connector will control the pedal part of keyboard sound generator. When the pedal part button is OFF, data received at the MIDI In connector will control the GS sound generator. 4. Touch . This setting remains stored in memory even while power is turned off. Selecting the MIDI Transmit Channel When you use the MIDI connectors or the USB connector of the ATELIER to transmit musical data to external devices, for each keyboard (Upper, Lower, and Pedal) you can specify the channel on which your playing will be transmitted as MIDI messages. For details refer to “Connecting MIDI Devices” (p. 246). 2. Touch the part to change the MIDI Transmit Channel. Menu Part Tx MIDI Ch. Upper Upper Tx MIDI Ch. Lower Lower Tx MIDI Ch. Pedal Pedal Tx MIDI Ch. Solo Solo Tx MIDI Ch. Drums Drums/SFX Tx MIDI Ch. M.Perc Manual Percussion Tx MIDI Ch. Ctrl Control The Control part transmits Expression pedal data and PC numbers. 3. Touch < >< > to change the setting. fig.09-31-a.eps 1. Touch on the Main screen. The System screen appears. fig.09-24.eps Setting 1–16 fig.09-30.eps 4. Touch . NOTE MIDI messages for the Solo part will be transmitted only when the Solo [To Lower] button is ON. fig.10-11.eps Various Other Settings 225 AT-800_e.book 226 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Adjusting the Brightness of the Display You can adjust the brightness of the display. 1. Touch on the Main screen. The System screen appears. 2. Touch < > < Brightness. > to display the Display Eliminating the Bouncing Ball from the Main Screen You can set the main screen so that the bouncing ball does not appear. 1. The System screen appears. 2. fig.09-44.eps Touch on the Main screen. Touch < > < Bouncing Ball. > to display the Main fig.09-44.eps 3. Touch the Display Brightness setting. fig.09-45.eps 3. Touch the Main Bouncing Ball setting to switch between “ON” and “OFF.” Each time you touch the Main Bouncing Ball setting, it will alternate between “ON” and “OFF.” Description Setting 4. Touch < >< > to change the setting. ON The bouncing ball appears in the main screen. OFF The bouncing ball does not appear in the main screen. Higher values will make the screen brighter. Setting 1–3 5. Touch . This setting remains stored in memory even while power is turned off. 226 4. Touch . This setting remains stored in memory even while power is turned off. AT-800_e.book 227 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Switching the Background of the Main Screen You can change the color and pattern for the main screen’s background. 1. Touch on the Main screen. The System screen appears. 2. Touch < > < Background. > to display the Main Changing the Ext Drive Connector Setting In some cases, when CD Drive is connected to the Ext Drive connector, it may take longer for data to be loaded, or data may fail to be loaded successfully. If this occurs, you may be able to solve the problem by changing the Ext Drive connector setting. 1. Touch on the Main screen. The System screen appears. fig.09-44.eps 2. Touch < Mode. >< > to display the Ext Drive fig.09-44.eps 3. Touch the Main Background setting. 4. Touch < >< > to change the setting. fig.10-13.eps 3. Touch the Ext Drive Mode setting to switch between “MODE 1” and “MODE 2.” Each time you touch the Ext Drive Mode setting, it will alternate between “MODE 1” and “MODE 2.” Setting MODE 1, MODE 2 5. 4. Touch . 5. Turn on the power once again. Touch . The System screen appears. 6. Touch on the System Screen. The main screen appears with the selected background. Various Other Settings This setting remains stored in memory even while power is turned off. 227 AT-800_e.book 228 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Turning the Remote Function On/Off You can turn the Remote function on (enabled) or off (disabled). 1. Touch on the Main screen. Touch < Control. >< These let you change the functions that are assigned to the remote control’s [FUNC 1] button and [FUNC2] button. 1. The System screen appears. 2. Changing the Functions of the Remote Control’s Buttons Touch on the Main screen. The System screen appears. > to display the Remote 2. fig.10-12.eps Touch < > < > to display the “Remote Ctrl: FUNC1” or “Remote Ctrl: FUNC2.” fig.09-44.eps 3. Touch the Remote Control setting to switch between “ON” and “OFF.” Each time you touch the Remote Control setting, it will alternate between “ON” and “OFF.” Description Setting 4. ON The remote control unit will operate the ATELIER. OFF The remote control unit will be disabled. You will not be able to operate the ATELIER using the remote control. 3. Touch either setting. 4. Touch < >< > to change the setting. fig.10-13.eps Touch . This setting remains stored in memory even while power is turned off. Description Setting 5. MELODY MUTE Mutes the sound of the melody, or minimizes the vocal sounds of a music CD (p. 259, p. 264). MELODY GUIDE Lowers the volume of the melody (p. 259). LYRICS Switches display of lyrics on (displayed) or off (hidden) (p. 218). Touch . This setting remains stored in memory even while power is turned off. 228 AT-800_e.book 229 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Using the V-LINK Function The V-LINK function is turned on, and the V-LINK icon appears in the main screen. fig.09-41.eps Connecting the ATELIER to a V-LINK compatible image device allows you to control the images with the ATELIER. V-LINK V-LINK ( ) is a function that allows music and images to be performed together. By using MIDI to connect two or more V-LINK compatible devices, you can easily enjoy a wide range of visual effects that are linked to the expressive elements of a music performance. How to Use the V-LINK 1. The Send PC Switch settings is automatically switched to ON when V-LINK is on (MODE 1, MODE 2). When the VLINK function is switched off, the Send PC Switch setting reverts to the setting in effect before V-LINK was switched on. Touch on the Main screen. The System screen appears. 2. Touch < >< > to display the V-LINK. fig.10-14.eps When V-LINK is set to “MODE 1” When a Registration button is pressed, “Bank Select” and “Program Change Number” messages are transmitted from the MIDI Out connector as video control messages. At this time, the Control MIDI transmit channel setting is disregarded, and the messages are transmitted via Channel 16. When V-LINK is set to “MODE 2” 3. 4. Touch the V-LINK setting (OFF/MODE 1/MODE 2). Touch < >< Description Setting OFF The V-LINK function is switched off. MODE 1 The V-LINK function is switched on. You can now control the video images using the Registration buttons. In this case, the Lower and Solo MIDI transmit channel settings are disregarded, and the messages are transmitted via Channel 16. NOTE NOTE The MIDI transmit channel used for video control messages is fixed at channel 16. For more on switching video images, refer to the owner’s manual for the connected device. The V-LINK function is switched on. You can now control the video images using the twelve rightmost keys of the lower keyboard and Registration buttons. No sound is produced when you press any of the twelve keys at the right end of the keyboard. Various Other Settings MODE 2 5. > to change the setting. In addition to the functions of “MODE 1,” MODE 2 also sets the device to transmit “Note messages” as video control messages from the MIDI Out connector when one of the twelve rightmost keys in the Lower keyboard is pressed. Touch . 229 AT-800_e.book 230 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings You can also use the following procedure to turn the V-LINK function on. 1. Hold down the Composer [Reset] button and press either the Upper Organ [Full 1] button or the Upper Organ [Full 2] button. Holding down the Composer [Reset] button and pressing the Upper Organ [Full 1] button switches the instrument to “MODE 1” (p. 229). Holding down the Composer [Reset] button and pressing the Upper Organ [Full 2] button switches the instrument to “MODE 2” (p. 229). Repositioning the Touch Screen If you’ve been using the Touch Screen for some time, the pointer may be shifted, making the ATELIER react incorrectly. You should correct this displacement when necessary by performing calibration (repositioning). 1. Touch on the Main screen. The System screen appears. 2. In the System screen, touch . The Utility screen appears. fig.00-38.eps The display changes as shown below, and the ATELIER switches to Image Control mode. fig.09-42.eps The V-LINK function is turned on, and the V-LINK icon appears in the main screen. fig.09-41.eps 3. Touch . fig.00-38-2.eps A display will ask for confirmation. 2. To cancel the V-LINK function, once again hold down the Composer [Reset] button and press either the Upper Organ [Full 1] button or the Upper Organ [Full 2] button. If set to “MODE 1” (p. 229), holding down the Composer [Reset] button and pressing the Upper Organ [Full 1] button switches the V-LINK function off. If set to “MODE 2” (p. 229), holding down the Composer [Reset] button and pressing the Upper Organ [Full 2] button switches the V-LINK function off. 230 To cancel the operation, touch . 4. Touch on the screen. 5. Touch the points indicated on the touch screen. AT-800_e.book 231 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings NOTE fig.09-38-2.eps Do this carefully, because touching a location that’s different from the one indicated for the pointer may make the displacement even worse. Be sure to touch the pointer accurately. If the following display appears, perform the touch panel position adjustment once again. Restoring the User Memory to the Original Factory Settings You can restore the User memory to their original factory settings. This function is called “User Memory Reset.” What is User Memory? “User Memory” refers to an area inside the instrument where you can store the user Rhythms you create and the performances you record. Rhythms and SMF music files saved on USB memory can also be copied to user memory (p. 97). User memory is quite useful, since anything you place there will be retained even while the power is turned off. The following things are stored in User memory: • Songs you’ve registered in “Favorites” • Rhythms • Registration sets 1. Touch on the Main screen. The System screen appears. fig.00-37.eps 2. In the System screen, touch to open the Utility screen. fig.00-38.eps Various Other Settings 231 AT-800_e.book 232 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 3. In the Utility screen, touch . fig.00-43-1.eps Restoring All Settings Other Than the User Memory to the Original Factory Settings You can restore all of the settings other than the User memory (p. 82) to their original factory settings. This function is called “Panel Reset.” 1. Touch on the Main screen. The System screen appears. The confirmation message appears on screen. fig.00-37.eps fig.00-43-2.eps Touch to return to the System screen without resetting the user memory. 4. 2. Touch . The user memory will be reset to the factory-set state. NOTE In the System screen, touch to open the Utility screen. fig.00-38.eps Never switch off the power while this operation is in progress! fig.00-40-2.eps To reset all settings other than User memory to their original factory settings, refer to p. 232. If you want to reset all settings to their factory-set state, refer to p. 25. 232 3. In the Utility screen, touch . fig.00-43-1.eps AT-800_e.book 233 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings The confirmation message appears on screen. fig.00-43-2.eps Formatting a USB Memory (Format) The process of preparing USB memory or floppy disks so that they can be used with the ATELIER is called “initialization” (formatting). If you touch , the Panel Reset will not be performed, and you will return to the System screen. 4. Touch . In certain cases, particularly with floppy disks, the media is formatted for a specific type of device. If the media format does not match the ATELIER’s, you will not be able to use that media with the ATELIER. 1. The Panel Reset operation will begin, and the settings will return to the factory-set condition. NOTE Never switch off the power while this operation is in progress! fig.00-40-2.eps Connect the USB memory to the external memory connector If you want to initialize a floppy disk, connect your floppy disk drive (sold separately) to the Ext Drive connector, and insert the floppy disk. 2. Touch on the Main screen. 3. Touch . The Registration Save screen appears. 4. Touch < >< > to select the media. Choose “Ext Memory” if you want to initialize USB memory, or choose “Disk” if you want to initialize a floppy disk. To reset only the User memory to its original factory settings, refer to p. 231. If you want to reset all settings to their factory-set state, refer to p. 25. 5. You can also use the following method to open the Panel Reset confirmation screen. 1. Touch on the Main screen, to display the Quick Guide screen. 2. Press the [Harmony Intelligence] button. Touch < > (Utility). The Utility screen appears. 6. Touch . The Format screen appears. The Panel Reset confirmation screen appears. 7. Touch to start formatting. When the format is finished, the Registration Save screen returns. NOTE Never attempt to remove the USB memory until formatting is complete. 233 Various Other Settings If you touch , you will return to the Registration Save screen without formatting. AT-800_e.book 234 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings Displaying a Graphic at Power-up 6. Touch . The BMP Installer screen appears. fig.09-34.eps The ATELIER allows you to load a favorite graphic into internal memory, and have it be displayed when the power is turned on. 1. Use your computer to create a graphic image file that meets the following criteria: Size 800 x 480 pixels Color 24 bit colors Format Image saved in BMP format Name The following characters can be used to name an image. ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmnop qrstuvwxyz0123456789#$ %&‘()-@~{}^_! NOTE 2. 3. 01–03 Images stored in internal memory For numbers at which no image is saved, “(Blank)” is shown. View The image stored in the ATELIER will be shown for a few seconds, allowing you to check the image. Load... Load an image from external media into internal memory. Clear... Delete an image from internal memory. If you use a character that cannot be used in a name, it will be replaced by another character when displayed. Using your computer, save the image that you want to load into the ATELIER on external media. Description Display 1–8 characters in length (lowercase is ok). A filename extension of “.BMP” must be added after the name. The ATELIER can store up to three images. If two or more images are stored in internal memory, those images will be displayed consecutively after the power is turned on. 7. In the screen, touch <01>–<03> to select the destination at which the image is to be saved. fig.09-35.eps Connect the external media containing the image to the ATELIER. If you’re using USB memory, connect it to the external memory connector. If you’re using a floppy disk, connect the separately purchased floppy disk drive to the Ext Drive connector. 4. Touch on the Main screen. The System screen appears. 5. In the System screen, touch . fig.00-38.eps 234 8. Touch . The following screen appears. fig.09-36.eps AT-800_e.book 235 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 9. Touch < >< > to select the media. Choose “Ext Memory” to load an image from USB memory, or choose “Disk” to load an image from floppy disk. The destination will show the names of the images saved on the external media. 10.Touch < > < > to select the image that you want to load into internal memory. Deleting an Image Stored in Internal Memory 1. Touch on the Main screen. The System screen appears. 2. In the System screen, touch . fig.00-38.eps You can touch to verify the image. 11.Touch . The image will be loaded. NOTE If an image is already stored at the load destination, the following screen will appear. fig.09-37.eps 3. Touch . fig.09-32.eps To erase the currently loaded image, and load the new image 1. Touch . The BMP Installer screen appears. fig.09-34.eps To cancel image loading 1. Touch . NOTE If the image cannot be loaded, the following screen will appear. fig.09-38.eps In the screen, touch <01>–<03> to select the image that you wish to delete. You can touch to verify the image. Numbers for which “(Blank)” is shown have no image. 235 Various Other Settings 4. AT-800_e.book 236 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 5. Touch . The following screen appears. fig.09-39.eps Copying Data from a Floppy Disk to USB Memory All songs and Registration data saved on a floppy disk can be copied to USB memory. NOTE Rhythms and image data cannot be copied. NOTE Songs and Registrations inside folders will not be copied. If you want to copy this data, move the song or Registration data out of the folder. To cancel without deleting the image, touch . 6. Touch . 1. Make preparations for the copy. Connect the floppy disk drive to the Ext Memory connector. Into the floppy disk drive, insert the floppy disk containing the data you want to copy. The image will be deleted. Once the image has been deleted, the screen will indicate “(Blank).” Connect your USB memory to the external memory connector. 2. Touch on the Main screen. The System screen appears. 3. In the System screen, touch . fig.00-38.eps 4. Touch . The following screen appears. If you decide to stop the data copy operation, touch . 236 AT-800_e.book 237 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 5. 9. Touch . A screen like the one below appears, allowing you to specify a name for the folder. Touch . The data from floppy disk will be copied to USB memory. When the copy is completed, a message will indicate “Completed,” and you will return to the System screen. NOTE If the floppy disk drive or USB memory is not connected correctly, a screen like the following will appear. fig.++-+++ If you’re copying all songs and Registrations to USB memory, a folder will be created in the USB memory, and the data will be saved in this folder. 6. 7. Touch the character select button ( to switch among uppercase/numbers. ) Touch the character select button repeatedly to cycle through the available choices, like this: uppercase → numbers → uppercase... Video-related Settings Touch the screen to specify the desired character. Specifying the Television Format The following characters can be selected. Set the ATELIER’s television format to match the television format of the television that is connected. Uppercase ABCDEFGHIJKLMNOPQR STUVWXYZ Change this setting if the image is not correctly shown on the television. Symbols _0123456789 Set this to the broadcast format used in your area. Delete a character. 1. Move the cursor (the symbol that indicates the location at which characters will be input) to left or right. Touch on the Main screen. The System screen appears. 2. Touch . fig.00-38.eps To cancel the operation, touch . 8. When you’re done making the settings, touch . The folder name has been assigned. The following screen appears. Various Other Settings 237 AT-800_e.book 238 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 3. Touch . The VIMA TUNES screen appears. Selecting the Aspect Ratio of the Video Output This setting changes the proportional relationship between the vertical and horizontal dimensions of the image that is output from the ATELIER to the television or display connected to the Video Output [Video] jack. The ATELIER’s display screen has a horizontal/vertical ratio of 16:9. Televisions and displays have screen sizes with a horizontal/vertical ratio of 4:3 or 16:9 (wide screen). NOTE 4. Touch . The Video Option screen appears. You can’t change the aspect ratio of the image that is output from the Video Output [RGB] connector to an external display or a television. If you’re viewing images on a television or display connected to the Video Output [Video] jack, change this setting as appropriate for the aspect ratio of the television or display you’ve connected. 1. Touch on the Main screen. The System screen appears. 2. Touch . fig.00-38.eps 5. Touch the NTSC/PAL setting to switch between “NTSC” and “PAL.” Setting NTSC, PAL NTSC and PAL Both of these are the names of color television broadcast standards. NTSC is used in North America and a number of other countries including Japan. PAL is used in many regions, including Europe and Asia. 6. Touch . This setting remains stored in memory even while power is turned off. 238 3. Touch . The VIMA TUNES screen appears. AT-800_e.book 239 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 4. Touch . Selecting the Type of Slide Show The Video Option screen appears. You can specify how transitions between images are to occur when you play back a slide show (p. 260). 1. Touch on the Main screen. The System screen appears. 2. Touch . fig.00-38.eps 5. Touch the Aspect Ratio setting to switch between “16:9” and “4:3.” Description Setting 16:9 Use this setting if the connected television or display has a screen aspect ratio of 16:9. 4:3 Use this setting if the connected television or display has a screen aspect ratio of 4:3. 3. Touch . The VIMA TUNES screen appears. 6. Touch . This setting remains stored in memory even while power is turned off. Image is displayed correctly Aspect Ratio 4:3 4:3 Television 4. Original image Touch . The Video Option screen appears. 16:9 16:9 Television Image is distorted Various Other Settings NOTE Image is not completely visible If the image is still not shown correctly even though you have adjusted the ATELIER’s aspect ratio to match the television or display you’ve connected, please change the settings of the connected television or display. 239 AT-800_e.book 240 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 5. Touch the Slide Show Type setting. Selecting the Interval at which Images will Change You can specify the interval at which images will change when you play back a slide show (p. 260). 1. Touch on the Main screen. The System screen appears. 2. Touch . fig.00-38.eps 6. Touch < >< Setting 7. > to change the setting. Description SIMPLE One photo will simply fade-out while the next photo fades-in. BLOCK The photo will be divided into blocks that change separately. POP The photo will switch using rapid movement and color combination. MIX Simple, block, and pop types will be combined. 3. Touch . The VIMA TUNES screen appears. Touch . 4. Touch . The Video Option screen appears. 240 AT-800_e.book 241 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Various Other Settings 5. Touch the Slide Show Interval setting. Viewing the Contents of the ATELIER’s Screen on a Television or external Display You can use your television or external display to view the contents of the ATELIER’s built-in screen. 1. Touch on the Main screen. The System screen appears. 2. 6. Touch < >< > to change the setting. Touch < >< > to display the Screen Out. fig.10-12.eps Setting 5 SECONDS, 8 SECONDS, 12 SECONDS, 4 MEASURES, 6 MEASURES, 8 MEASURES 7. Touch . 3. Touch the Screen Out setting to switch between “ON” and “OFF.” Description Setting NOTE 4. ON The contents of the ATELIER’s screen will be shown on your television or external display. OFF The contents of the ATELIER’s screen will not be shown on your television or external display. The ATELIER logo will be shown. I If the Slide Show setting is on, the slide show will be shown on your television or external display. Touch . Various Other Settings 241 AT-800_e.book 242 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Name and Functions of Jack and Connectors 1 6 7 2 8 3 4 9 10 5 11 12 The functions of the jacks on the bottom of the keyboard are described below. 1. Phones Jacks → p. 23 7. Connect headphones here. 2. 3. You can connect an external speaker or a reverb unit to obtain a more spacious reverb. Mic Volume Knob → p. 24 This adjusts the volume when a microphone is connected. Mic Jack → p. 24 If you set Aux Out mode to “SEPARATE,” the drum sound will be output from these jacks (p. 249). 8. 5. MIDI Out/In Connectors → p. 246 Input You can connect external MIDI devices to the ATELIER and exchange performance data between them. 9. USB Connector → p. 244 Used for connecting a computer to the ATELIER using a USB cable. Output 6. Bass Jack If you set Aux Out mode to “SEPARATE,” the bass sound will be output from this jack (p. 249). Connect microphone here. 4. Aux/Drums L/Mono, R Jacks Main L/Mono, R Jacks These jacks can be connected to your audio system to enjoy more powerful sound. If the Aux Out mode is set to “SEPARATE,” sounds other than drums and bass will be output from these jacks (p. 249). Input L/Mono, R Jacks Using these jacks, you can connect other sound generating devices or audio equipment and play sounds from other devices through the ATELIER’s speaker. Video Out 10.RGB Connector → p. 247 You can connect an external display here to view a slide show. 11.Video Jack → p. 248 You can connect a television here to view a slide show. 12.Illumination Switch Press this switch to turn on the illumination. 242 AT-800_e.book 243 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Connecting to Audio Equipment You can connect audio devices to play the sound of the ATELIER through the speakers of your audio system, or to record your performance on a tape recorder or other recording device. When connecting, please use an audio cable with a standard phone plug, such as the PCS-100PW (sold separately). Connecting Speakers to the ATELIER and Outputting Sounds * When connection cables with resistors are used, the volume level of equipment connected to the input jacks may be low. If this happens, use connection cables that do not contain resistors. * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Turning Off the Power 1. Turn the volume all the way down on the ATELIER and on the speaker you’re about to connect. 2. Turn off the connected speaker. 3. Turn off the ATELIER. Playing Sounds from Audio Equipment Through the ATELIER Input (Line In) jack Turn the volume all the way down on the ATELIER and on the speaker you’re about to connect. 2. Turn off the power to the ATELIER and the speaker. 3. Use audio cables (sold separately) to make the connection. 4. Switch on the ATELIER. 5. Switch on the connected speaker. 6. Adjust the volume level on the ATELIER and the connected speaker. Connecting with External Device 1. Stereo Set etc. Output (Line Out) jack 1. Turn the volume all the way down on the ATELIER and on the audio device you’re about to connect. When you play the ATELIER’s keyboard, the sound is played from the connected speakers. 243 AT-800_e.book 244 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device 2. Turn off the power to the ATELIER and the audio device. 3. Use audio cables (sold separately) to make the connection. 4. Switch on the audio device. 5. Switch on the ATELIER. 6. Adjust the volume level on the ATELIER and the audio device. The sounds from the connected audio device are played by the ATELIER. Turning Off the Power 1. Turn the volume all the way down on the ATELIER and on the audio device you’re about to connect. 2. Turn off the ATELIER. 3. Turn off the audio device. Connecting a Computer The following become possible once you connect a USB cable (available separately) between the USB connector located to the lower left of the ATELIER and the USB connector of your computer. • You can use the ATELIER to play sounds from SMF music files played back with MIDI software. • By exchanging MIDI data with sequencer software, you can save songs recorded with the ATELIER to your computer, and enjoy a variety of musical control and editing features. Connect the ATELIER to your computer as shown below. USB Cable USB Connector Computer * Refer to the Roland website for system requirements. Roland website: http://www.roland.com/ 244 AT-800_e.book 245 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device If connection to your computer is unsuccessful... Normally, you don’t need to install a driver in order to connect the ATELIER to your computer. However, if some problem occurs, or if the performance is poor, using the Roland original driver may solve the problem. Specify the USB driver you want to use, and then install the driver.For details on downloading and installing the Roland original driver, refer to the Roland website. Making the Settings for the USB Driver 1. Touch on the Main screen. The System screen appears. 2. Touch < >< > to display the USB Driver. fig.10-12.eps Roland website: http://www.roland.com/ Specify the USB driver you want to use for the ATELIER, and then install the driver. Caution • To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 3. Touch the USB Driver setting to switch between “GENERIC” and “ORIGINAL.” Each time you touch the USB Driver setting, it will alternate between “GENERIC” and “ORIGINAL.” • Only MIDI data can be transmitted using USB. • USB cables are not included. Consult your Roland dealer if you need to purchase. Setting • Turn on the power to the ATELIER before starting up MIDI applications on the computer. Do not turn the ATELIER on or off while any MIDI application is running. 4. Description GENERIC Choose this if you want to use the standard USB driver that was included with your computer. Normally, you should use this mode. ORIGINAL Choose this if you want to use a USB driver downloaded from the Roland website. This setting remains stored in memory even while power is turned off. 245 Connecting with External Device Turn the ATELIER’s volume to the minimum level, switch off the power, then turn it back on again. AT-800_e.book 246 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device By connecting an external MIDI device and exchanging performance data, you can control the performances on one device from the other. For instance, you can output sound from the other instrument or switch Tones on the other instrument. The ATELIER contains two sound generators: one sound generator for its own keyboards and one GM2/GS sound generator (p. 275). Normally, musical data transmitted from an external device to the MIDI In connector is sent to the GM2/GS sound generator, but you can also set the “MIDI IN Mode” parameter (p. 224) so that the keyboard sound generator is controlled. What’s MIDI? Making the Connections Connecting MIDI Devices MIDI, short for “Musical Instrument Digital Interface,” was developed as a standard for the exchange of performance data between electronic instruments and computers. The ATELIER is equipped with MIDI connectors to let it exchange performance data with external devices. These connectors can be used to connect the ATELIER to an external device for even greater versatility. About MIDI Connectors NOTE 1. Turn the volume all the way down on the ATELIER and on the device you’re about to connect. 2. Switch off the power to the ATELIER and the device you’re about to connect. 3. Use a MIDI cable (sold separately) to connect the MIDI connectors to each other. 4. Switch on the power to the ATELIER and the connected device. 5. Adjust the volume level on the ATELIER and the connected device. 6. You should also set the MIDI send channel as needed (p. 225). The ATELIER has two kinds of MIDI connectors. Connecting these to the MIDI connectors on a MIDI instrument makes it possible for the two instruments to control each other. For instance, you can output sound from the other instrument or switch tones on the other instrument. You should also set the MIDI send channel as needed. fig.10-09.eps MIDI Out Connector Connect the external MIDI device to the MIDI IN connector with an optional MIDI cable. The notes played on the keyboard, movements of the Damper pedal, Expression data, data indicating that a Registration button, etc., was pressed will be transmitted to the external MIDI connector. The Solo voice will be transmitted only if the Solo [To Lower] button is ON. MIDI In Connector Connect the external MIDI device to the MIDI out connector with an optional MIDI cable. Performance messages from an external MIDI device are received here. These incoming messages may instruct the receiving MIDI instrument to play sounds or switch voices. 246 When connecting, turn on power to your various devices in the order specified. Failure to follow these steps in the order given could cause a malfunction and/or damage to speakers or other equipment. AT-800_e.book 247 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Connecting an External Display or Television Connecting an External Display Display Cable (commercial available) External Display Displays That Can Be Connected to This Instrument NOTE In general, a great many of the VGA monitors and multiscan monitors that are available on the market are compatible with this instrument. However, before you connect any monitor, make sure it meets the following specifications: 800 x 480 pixels Horizontal scan frequency 31.5 kHz Vertical scan frequency 60 Hz Connector 3-row, 15-pin D-Sub type Signal Analog NOTE Confirm that the display to be used is compatible with the frequencies mentioned above. Using a display that is not compatible with the above frequencies may result in incorrect image output when images move, and in certain cases may even damage the display. NOTE To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 1. Turn off the power to the ATELIER and the display to be connected (p. 23). 2. Connect your display to the ATELIER. Connecting with External Device Resolution Making the Connections Use display cable (sold separately) to connect the display to the Video Out “RGB” connector on the ATELIER. 3. Switch on the ATELIER (p. 22). 4. Switch on the connected display. For more on handling the external display, refer to your display’s owner’s manual. 247 AT-800_e.book 248 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Connecting a Television Video Cable (commercial available) Television Making the Connections NOTE To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. 1. Turn off the power to the ATELIER and the television to be connected (p. 23). 2. Connect your television to the ATELIER. Use a video cable (sold separately) to connect the ATELIER Video Out [Video] jack with the television’s video input jack. 3. Switch on the ATELIER (p. 22). 4. Switch on the connected display. 5. (As necessary) Specify the television output format (p. 237). 6. Specify the aspect ratio (ratio between width and height) for your television (p. 238). 248 Switching Off Your Television or External Display You must turn off the power of the television or external display in the following order. 1. Minimize the volume of the ATELIER (p. 23). 2. Switch off the connected television or display. 3. Switch off the ATELIER (p. 23). AT-800_e.book 249 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Changing the settings when external speakers are connected The ATELIER has an Aux/Drums Output jack and Bass Output jack on the bottom of the instrument. By using this Aux/Drums Output jack to connect external speakers or audio set, you can sound the reverb (reverberation) from the speakers. An external reverb unit can also be connected and used to apply reverb. Switching the Aux Out Mode 1. Touch on the Main screen. The System screen appears. 2. Touch < Mode. 3. Touch the Aux Out Mode setting. >< > to display the Aux Out fig.10-11.eps By making connections to the Aux/Drums Output jacks or Bass Output jack, you can output the drums or bass sounds separately. This is convenient when you’ve connected the ATELIER to a mixer so that the overall volume balance can be adjusted on the mixer. Switching the Aux Out On/OFF 1. Touch on the Main screen. The System screen appears. fig.10-11.eps 2. 3. Touch < >< 4. Touch < AMBIENCE Play the RSS reverb sound from the external speakers The reverb sound applied by the ATELIER will be output. TO EFFECTOR Connect an external reverb processor and use it to apply the desired reverb. The direct sound is output for applying reverb. SEPARATE Use a connected mixer to adjust the volume balance Bass, drums, and other sounds will be output separately. If the vintage organ type is “Flute,” the bass sound will not be output from the Bass bass output jack. The bass sound will be output from the Main Output jacks. ENSEMBLE The accompaniment and Rhythm will be heard from external speakers, creating the sensation that you’re playing with an orchestra The sounds you play on the keyboard will be heard from the ATELIER’s own speakers, and the accompaniment will be heard from the speakers that are connected to the Aux/ Drums Output connector. Touch the Aux Out setting to switch between “ON” and “OFF.” This setting remains stored in memory even while power is turned off. 5. Touch . You can change the depth of Reverb for each part (p. 152). This setting remains stored in memory even while power is turned off. 249 Connecting with External Device Effects > to display the Aux Out. Touch . > to change the setting. Setting Each time you touch the Aux Out setting, it will alternate between “ON” and “OFF.” 4. >< AT-800_e.book 250 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Aux-Setting1.eps A Setup for a Small Hall or Home Speakers are placed at the back to produce the RSS reverb sound. This setup lets you enjoy the sensation of being enveloped by sound, even while in your own living room. Aux Out : ON Aux Out Mode: AMBIENCE AT-800 Aux/Drums Output Rear Speaker L Rear Speaker R Powered Speaker Powered Speaker A Setup for a Mid-sized Hall Speakers are placed in front and in the back to produce the RSS reverb sound. AT-800 Front Speaker L Main Output Aux Out : ON Aux Out Mode: AMBIENCE Front Speaker R Aux/Drums Output Amplifier Rear Speaker L Rear Speaker R Amplifier 250 AT-800_e.book 251 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Aux-Setting2.eps Settings for Using an External Reverb Processor You can use an external reverb processor to apply reverb to the ATELIER’s sound. Aux Out : ON Aux Out Mode: TO EFFECTOR AT-800 Front Speaker L Front Speaker R Aux/Drums Output Main Output Amplifier Line Input 1 External Reverb Device 6dB MIN MAX MIN LINE AUX INPUT LEVEL MAX VALUE EXIT ( PUSH ) 12dB 40 Hz 700 Hz MIN USER PROGRAM 2 3 MUTE S1 S2 S3 S4 ROOM WALL TIME LEVEL F1 F2 F3 F4 MAX ROLL-OFF FREQ LEVEL LOW - FREQ OUTPUT SETUP / CHECK POWER Line Output Amplifier Connecting with External Device Rear Speaker L Rear Speaker R 251 AT-800_e.book 252 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device A Setup for a Recital Bass, drums, and other sounds are output separately, and a mixer is used to adjust the volume balance. Aux Out : ON Aux Out Mode: SEPARATE AT-800 Main Output Bass Output Aux/Drums Output Speaker L Speaker R Mixer Amplifier A Setup for Enjoying Ensemble Performance By producing the accompaniment and rhythm from external speakers, you can enjoy the sensation of performing together with an orchestra. Aux Out : ON Aux Out Mode: ENSEMBLE AT-800 Aux/Drums Output Acc om and panim rhy ent thm L Powered Speaker 252 t men i n pa thm om Acc nd rhy a R Powered Speaker AT-800_e.book 253 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Using the Remote You can use the included remote control to conveniently play/stop a song or to select songs. You can also use the remote to switch the image of the external display or television, or assign frequently used functions to the remote buttons. For details on how the remote control’s buttons function, refer to “Remote Control Buttons” (p. 255) Installing Batteries in the Remote Install the included batteries (two) into the remote control unit. 1. Remote (Rear) 2. 3. Remote Cover 1. Slide the cover located on the rear of the remote to open it. 2. Insert the two AA batteries in the orientation shown on the remote. 3. Slide the cover closed. NOTE Be sure to observe the correct polarity (+, -) for each battery. Connecting with External Device 253 AT-800_e.book 254 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Using the Remote When using the remote, point it toward the remote sensor on the ATELIER, and stay within the allowable operating range described below. Front View Remote Sensor Over View Operating range for the remote Distance: 4 meters or less Angle: 40 degrees or less (to left or right) Remote Cautions when using the remote • You can’t operate two or more of the remote’s buttons simultaneously. • Even if the remote is within the operating range, it may not work if there are obstacles between it and the remote sensor, or if the angle is poor. • Malfunctions may occur if you use the remote near a device that produces infrared light, or if you use another infrared remote control nearby. • The battery life will depend on the conditions of use. The operating range will decrease as the batteries run down. Replace the batteries if this occurs. • If you won’t be using the remote for an extended period, remove the batteries. • If a strong light such as a spotlight strikes the remote sensor, the remote control may respond sluggishly. 254 AT-800_e.book 255 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Remote Control Buttons You can use the buttons of the remote control to perform the following functions. 3 1 4 2 5 6 7 8 10 9 11 Button name Description [EJECT] button If a CD drive is connected, this ejects the CD or opens/closes the tray. 2 [VOCAL] button Adjusts the depth of mic echo. Each time you press the button, the mic echo depth will change. 4 → 8 → 12 → 0 → 4 ... 3 [VIDEO] button Switches a slide show shown in the connected external display or television (p. 260). 4 [CANCEL] button If you have used the [VOCAL] button, [VIDEO] button, or [TONE] button to change the settings, this will return the settings to their factory-set state. 5 [TONE] button The reverb depth will change each time you press the button. Connecting with External Device 1 255 AT-800_e.book 256 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Connecting with External Device Button name SONG [INTERNAL] button The demo screen will be displayed. SONG [FAVORITES] button Selects songs from “Favorites.” SONG [EXTERNAL] button Selects songs from an external media (USB memory or floppy disk). If external media is connected both to the external memory connector and to the Ext Drive connector, pressing this button toggles you between these two sources of media. In this case, “Ext Memory1” is indicated for the external media connected to the external media connector, and “Ext Memory2” is indicated for the external media connected to the Ext Drive connector. * This button won’t work if no external media is connected. [ ] button Pressing the [ [ ] button Plays/stops the song. Press the remote [ ] button to toggle the song between playing and stopped. When you press the remote [ ] button, songs will play back consecutively from the selected song. All songs in the selected location (favorites or external media) will play back in succession. Playback will stop when you press the remote [ ] button once again. [ ] button Press the [ 6 7 ] button selects the preceding song. ] button to select the next song. VOLUME [MUTE] button Temporarily mutes all sounds. VOLUME [-] [+] buttons Adjust the overall volume of the Atelier. Pressing the VOLUME [-] button decreases the volume, and pressing the VOLUME [+] button increases the volume. [FUNC 1] button Executes the function you’ve assigned to this button. You can change the function that’s assigned to the button (p. 228). With the factory settings, “LYRICS” is assigned to this button. [FUNC 2] button Executes the function you’ve assigned to this button. You can change the function that’s assigned to this button (p. 228). With the factory settings, “Melody Mute” is assigned to this button. 10 TEMPO [-] [+] buttons Adjust the tempo of the song. Pressing the TEMPO [-] button slows down the tempo, and pressing the TEMPO [+] button speeds up the tempo. * You can’t change the tempo of a music CD. 11 KEY CTRL (key control) [-] [+] buttons Change the key of the song that’s playing. Pressing the KEY CTRL [-] button will lower the key, and pressing the KEY CTRL [+] button will raise the key. → Playback Transpose (p. 218) 8 9 256 Description AT-800_e.book 257 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video You can connect an external display or television to the ATELIER, and use it to view images from a device connected to the ATELIER. You can also connect a CD drive (commercially available) and play back VIMA TUNES (sold separately). While playing a VIMA TUNES song, you can use the external display or television to view a slide show suitable for the character of the song, or play along using recommended tones. VIMA TUNES Screen In the System Utility screen, touch to access the “VIMA TUNES screen” shown below. Mute the melody portion, or reduce the volume. Change the key of the song that’s playing VIMA TUNES is a Roland specification for music files that contains image and lyric data, allowing you to enjoy songs with lyrics and images simultaneously. When data bearing the “VIMA TUNES” logo is played back on a device that bears the same logo, lyrics can be shown on the screen of a connected external display or television, letting you enjoy karaoke or watch a slide show. You can also access the “VIMA TUNES screen” from the “Rec/ Play screen”(p. 164). Sounds appropriate for the currently playing VIMA TUNES song will be selected automatically. Enjoying Music and Video 257 AT-800_e.book 258 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video Enjoying VIMA TUNES Songs Listening to a VIMA TUNES Song You can connect a CD drive (commercially available) and play back VIMA TUNES (sold separately). While playing a VIMA TUNES song, you can use the external display or television to view a slide show suitable for the character of the song, or play along using recommended tones. 1. Connect a commercially available CD drive to the Ext Drive connector, and insert the VIMA TUNES disc into the CD drive. 2. Touch on the Main screen. If you want to use a CD or the CD drive, refer to “Connecting a CD Drive”(p. 28). The System screen appears. 3. Touch . 4. Touch . The VIMA TUNES screen appears. You can also press the panel’s [Song] button and choose a VIMA TUNES song from Song Select screen. NOTE It will take a certain amount of time until VIMA TUNES song can be selected. 258 AT-800_e.book 259 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video 5. Touch < >< 6. Touch < > to start playing back the song. > to select the song you want to play. You can touch Playback Transpose < >< > to change the key of the song. When you touch Melody in the screen, the melody will be muted. You can mute the melody, and play the melody yourself. When you touch Melody in the screen, the volume of the melody will be lowered. You can leave the melody playing at a lowered volume and play along until you’ve learned the melody. Since you will still be able to hear the melody, you can use it as a guide during practice. 7. Touch < > to stop playing back the song. Enjoying Music and Video 259 AT-800_e.book 260 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video Displaying a Slide Show while the Song Plays While playing back a VIMA CD-ROM (VIMA TUNES), you can view a slide show of images that match the mood of the song. Songs on a CD-ROM created for VIMA (VIMA TUNES) contain slide show images suitable for those songs, making it easy for you to enjoy a slide show without having to prepare your own images (photos). 1. Connect a commercially available CD drive to the Ext Drive connector, and insert the VIMA TUNES disc into the CD drive. 2. Touch on the Main screen. The System screen appears. 3. Touch . 4. Touch . The VIMA TUNES screen appears. 5. 260 Touch so it’s lit. You can also press the panel’s [Song] button and choose a VIMA TUNES song from Song Select screen. AT-800_e.book 261 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video 6. 7. Touch < Touch < >< > to select the song you want to play. > to start playing back the song. NOTE It will take a certain amount of time until VIMA TUNES song can be selected. A slide show suitable for the character of the song will be shown on the external display or television connected to the ATELIER. 8. Touch < > to stop playing back the song. Viewing the ATELIER’s screen to check the image that’s shown on your external display You can view the ATELIER’s screen to check the image that’s shown on your external display. 1. Press the [Video Monitor] button, getting its indicator to light up. The [Video Monitor] button indicator will alternate between on (lit) and off (dark) each time it is pressed. fig.01-32_AT-900.eps The ATELIER’s display will show the same image as shown on your external display. Enjoying Music and Video 261 AT-800_e.book 262 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video Performing with Sounds that Match the Song (Recommended Tones) When playing along on the keyboard while listening to a CD-ROM made for the VIMA (VIMA TUNES), this function lets you play using instrumental sounds that are appropriate for the atmosphere of the selected song. If you select a song from a CD-ROM created for VIMA (VIMA TUNES), three recommended tones will automatically be selected in the VIMA TUNES screen. You can use these three sounds to perform sounds that will match the character of that song. When you want to select a song from a CD-ROM made for the VIMA (VIMA TUNES), insert the CD-ROM into the CD drive. 1. Select the song of VIMA CD-ROM (p. 263). 2. Touch on the Main screen. The System screen appears. 3. Touch . 4. Touch . The VIMA TUNES screen appears. The three recommended tones are shown in the lower part of the screen. 5. Touch one of the recommended tones in the screen to select a tone. 6. Touch < 7. > to start playing back the song. Play along with the song. The tones you play will be suitable for the character of the song. 8. 262 Touch < > to stop playing back the song. AT-800_e.book 263 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video Listening to Songs from Music CD You can connect a CD drive to the ATELIER and use it to play music CDs. This lets you perform or sing along with the backing of a music CD. 1. Connect a commercially available CD drive to the Ext Drive connector, and insert the music CD into the CD drive. If you want to use a CD or the CD drive, refer to “Connecting a CD Drive”(p. 28). NOTE 2. You can’t copy music CD songs to “Favorites.” Press the [Song] button. The Song Select screen appears. NOTE It will take a certain amount of time until a music CD can be selected. 3. Touch < >< 4. Touch < >< 5. Touch < >( ) to start playing back the song. 6. Touch < >( ) to stop playing back the song. > to select the “CD.” > to select the song you want to play. NOTE You can also play or stop the music data by touching or in the Rec/Play screen, and you can touch or to rewind or fast-forward the playback. Enjoying Music and Video 263 AT-800_e.book 264 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Enjoying Music and Video Enjoying Karaoke with a Music CD (Center Cancel) You can minimize the vocal sounds of a commercially available music CD, and sing the vocal part yourself. This is a convenient way to enjoy karaoke or practice soloing with a favorite music CD. 1. Connect a commercially available CD drive to the Ext Drive connector. 2. Insert the music CD you want to use into the CD drive, and select the song you want to sing (p. 263). 3. Touch on the Main screen. NOTE For some songs, the vocal sound may not be eliminated completely. The System screen appears. 4. Touch . 5. Touch . The VIMA TUNES screen appears. 6. Touch the Melody on the screen. The Center Cancel function is active. 7. Touch < > to start playing back the song. When you play back the song, the sound of the melody or vocal will be minimized. This lets you song the melody portion yourself. Transposing the Song to a Comfortable Key for Singing You can transpose the song to a key that is more comfortable for you to sing. If you or someone else will be singing along with a song, you can change the key of the song so it’s appropriate for the singer’s range. 1. Touch Playback Transpose < screen. Each time you touch Playback Transpose < >< > on the VIMA Tunes >< >, the key is changed by one semitone. Touch < > to lower the key, or touch < > to raise the key. This can be set in a range of -6–0–+5 (semitone steps). The VIMA TUNES screen shows the value you’ve specified. 2. 264 If you touch Playback Transpose < Key Control will be turned off. >< > to select “0,” If you select a different song, the playback transpose settings will return to their factory-set state. AT-800_e.book 265 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting Power does not Turn On When you press the [Power On] switch, the power doesn’t come on Check Power cord is not connected correctly. Solution Connect the power cord correctly. Page p. 22 Problems with the Screen Display Check Solution Page The Bouncing Ball display is turned off. Turn the Main Bouncing Ball setting ON. p. 226 Can’t view the main screen The [Video Monitor] button is lit. If the [Video Monitor] button is lit, the ATELIER’s display will show the same image as the device connected to the ATELIER. Press the [Video Monitor] button so it’s turned off. p. 18 It appears as though there are vertical stripes in the screen This is due to the nature of a liquid crystal display, and is not a malfunction. This is not a malfunction. --- With some music files, the lyrics cannot be displayed correctly. This is not a malfunction. --- In the Notation screen, some lyrics or notes could extend beyond the edges of the screen, and not be displayed. This is not a malfunction. --- A button was pressed while the lyrics were being shown in the display. During the display of lyrics, you could be taken to a different screen if you press a button. If you want to have the lyrics be displayed again, touch on the Rec/Play screen. In the Notation screen, some lyrics or notes could extend beyond the edges of the screen, and not be displayed. This is not a malfunction. --- The Notation display feature is particularly unsuitable for the display of difficult, complex musical works that demand accurate notation. This is not a malfunction. p. 173 If you select a part that does not contain performance data, notes will not be displayed in the notation. Change the part that is displayed. p. 172 Problem Bouncing Ball is not shown Lyrics are not indicated properly in the display Lyrics are not indicated properly in the display Notation is not indicated properly in the display Nothing appears on screen The ATELIER uses a liquid-crystal screen, so text may not be displayed when the ambient temperature is below freezing. This is not a malfunction. p. 218 --- 265 Troubleshooting Problem Appendices If the ATELIER does not function in the way you except, first check the following chart. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. AT-800_e.book 266 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting No Sound is Heard Check Problem Solution Page The [Master Volume] slider is set too low. Turn the [Master Volume] knob toward “Max.” p. 22 Headphones are connected. When you connect the headphones, the sound is heard only through the headphones. If you want sound to be output from the speakers, disconnect the headphones. p. 23 The plug is still plugged into the headphone jack. Disconnect the plug from the headphone jack. p. 23 The volume is set too low on the Level [▲] [▼] buttons. Press the Level [▲][▼] buttons to raise the volume. p. 72 The volume is set too low on the Expression Pedal. Advance the expression pedal. p. 136 You do not have a Voice selected. Press a voice button to select a voice. Voices that have their button indicator lit can be played. p. 48 “Percussion Set 3” has been selected for the Upper keyboard. When “Percussion Set 3” is selected, some keys may have no sound assigned to them. For the upper keyboard, select a voice other than “Percussion Set 3.” p. 49 Drums/SFX are selected for the Lower keyboard, but you are playing a key to which no drum sound is assigned. Turn the Drums/SFX off or play keys to which drums sounds are assigned. p. 76 The Lower keyboard will not produce sound while an Intro or Ending is being played. This is not a malfunction. No sound is heard (when external devices are connected) The power of the connected external devices is not turned on. Use the correct procedure to turn on the power of the connected external devices. p. 243 – p. 249 There is no sound from the twelve keys at the right of the lower keyboard The V-LINK function is set Mode 2. When V-LINK setting is Mode 2, the group of twelve keys starting at the very right of the lower keyboard are used for controlling video images. Therefore, no sounds are played even when you press these keys. Turn the V-LINK function off, or select Mode 1 for the V-LINK function. p. 229 No sound is heard No sound is heard (by the Upper keyboard) No sound is heard (by the Lower keyboard) --- Problems with the Sound Problem Solution Page Bass is heard even though you are not playing the Bass Pedalboard The Pedal [To Lower] button or the [Bass Split] button is ON. When the Pedal [To Lower] button is ON, the Bass will be sounded by the Lower keyboard. In the Pedal part, press the Pedal [To Lower] button or [Bass Split] button to turn the button off (dark). p. 161 p. 163 Chorus effect does not apply Some sounds do not allow the chorus effect to be applied. This is not a malfunction. Harmony Intelligence is at ON. Turn “Harmony Intelligence” off. p. 138 Chord Intelligence is turned ON. Turn “Chord Intelligence” off. p. 90 Even though you press only one key, a multiple number of notes sound 266 Check --- AT-800_e.book 267 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting Solution Page If there is a cell phone nearby, you may hear noise from the ATELIER when an incoming call or outgoing call occurs, or during a conversation. Keep the phone as far away as possible, or turn off its power. --- Transpose is in effect. Simultaneously press the Transpose [-] [+] buttons to cancel the transposition (the Transpose [-][+] buttons’ indicators will go out). p. 130 The tuning is incorrect. Adjust the standard pitch. p. 222 While set for an octave shift, you are playing keys beyond the recommended range. This does not indicate a malfunction. Adjust the Octave Shift setting. p. 74 Pressing the expression pedal while playing back ATELIER performance data produces a crackling noise The expression pedal function is set to “PEDAL+COMPOSER” during playback of ATELIER performance data. When this setting is used, moving the expression pedal while playing back ATELIER performance data may create a difference between the expression pedal information in the performance data and the volume as set with the expression pedal, which can result in this kind of sound being produced. Set the expression pedal function to “PEDAL” during playback. p. 212 Rotary effect is not be applied Some sounds do not allow the rotary effect to be applied. This is not a malfunction. --- Some keys (of certain keyboard parts) sound strange You are playing notes outside the recommended range of the voice. This is not a malfunction. --- The Part Balance volume of each part is too high. Press the Part Balance button to lower the volume. p. 72 The Reverb volume has been raised when the volume of each Part Balance button is already raised. Either lower the Reverb volume, or adjust the Part Balance of each part. p. 72 p. 149 The [Master Volume] slider has been used to raise the overall volume excessively. Use the [Master Volume] slider to lower the overall volume. p. 22 You have selected a “Marimba Treml” or “Banjo Treml” sound. This is not a malfunction. If you select a “Marimba Treml” or “Banjo Treml” sound, a sound will also be produced when you take your finger off the key. --- When listening through speakers: Playing at loud volumes may cause instruments near the ATELIER to resonate. Resonance can also occur with fluorescent light tubes, glass doors, and other objects. In particular, this problem occurs more easily when the bass component is increased, and when the sound is played at higher volumes. Use the following measures to suppress such resonance. •Place speakers so they are 10-15 cm from walls and other surfaces. •Reduce the volume. •Move the speakers away from any resonating objects. --- When listening through headphones: Here, a different cause (such as resonance produced by the ATELIER) would be suspect. Consult your Roland dealer or nearest Roland Service Center. --- Noise is heard in the sound Pitch is off Sound is distorted/cracked Sound is produced when you take your finger off a key The Bass Range Sounds Odd, or There Is a Vibrating Resonance 267 Troubleshooting Check Appendices Problem AT-800_e.book 268 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting Problem Check Solution Page The sound is not played correctly If you layer the same type of sound (for example, Strings 1 and Strings 5), or play an octave-shifted organ sound, the timing at which you play a note or the phase relationship between the two sounds may affect the way in which the sounds are heard, but this is not a malfunction. You are layering sounds of the same type (e.g., Strings 1 and Strings 5). Alternatively, you are playing an organ sound with Octave Shift. This is not a malfunction. --- The volume level of the instrument connected to ATELIER is too low. Could you be using a connection cable that contains a resistor? Use a connection cable that does not contain a resistor. p. 243 When playing the same sound in the Upper keyboard and Lower keyboard, the volume is different On one of the keyboards, “Initial Touch” is turned ON. Set the initial touch settings of the Upper keyboard and the Lower keyboard to both On, or both Off. p. 210 When the human voice “Jazz Scat” is selected, playing dynamics do not change the sound The setting of “Initial Touch” is turned OFF. Turn “Initial Touch” on. p. 210 When you release your fingers from keys in the Lower keyboard, the notes continue sounding The Lower Voice [Hold] button is at ON. Press the Lower Voice [Hold] button to turn it off (dark). p. 80 Registrations do not Switch Correctly Problem The Rhythm or Tempo does not change when you press the Registration buttons Check The settings at which Registrations are recalled (Registration Arranger Update) has been set to “DELAYED.” Solution Set the timing at which the arranger settings are called up (Registration Arranger Update) to “INSTANT.” Page p. 109 p. 217 Rhythm or Automatic Accompaniment does not Sound Right Problem Check Solution Page The keys for a chord were not pressed simultaneously. Either turn on the Chord Intelligence function, or play the chord correctly. p. 90 When Chord Intelligence is OFF, the chord is not being pressed correctly. Either turn on the Chord Intelligence function, or play the chord correctly. p. 90 When performance data from a device other than the ATELIER is being played together with the Automatic Accompaniment, the Automatic Accompaniment may not be sounded correctly. This is not a malfunction. Can’t use Chord Intelligence function Chord Intelligence is at OFF. Turn “Chord Intelligence” on. Rhythm sounds odd When performance data from a device other than the ATELIER is being played together with the Automatic Accompaniment, the Rhythm performance may not be sounded correctly. This is not a malfunction. Automatic Accompaniment sounds odd 268 --- p. 90 --- AT-800_e.book 269 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting Check Solution Turn “Auto Std Tempo” off. The bass note of the Automatic Accompaniment does not sound When a voice is selected for the Pedal Bass part, the bass of the Automatic Accompaniment will not sound. This is not a malfunction. Chord Hold is at OFF. Turn “Chord Hold” on. The Automatic Accompaniment will play while you press a chord. If Chord Hold is turned ON, the Automatic Accompaniment will continue playing with the Rhythm even when you take your hand off of the Lower keyboard. When you release your fingers from keys in the Lower keyboard while Automatic Accompaniment and Rhythm are playing, the Rhythm performance only remains playing p. 215 --- p. 214 Song does not Play Correctly Problem Check Solution Page Certain instrument are not heard while playing a song The track is muted. Turn off track muting. p. 168 p. 170 The volume changes during playback of performance data When recording is performed repeatedly while changing the Part Balance volume, the previouslyrecorded Part Balance data remains in the Control track. If you wish to get rid of the volume changes, use the Erase function to delete the Part Balance data. p. 193 Check Solution Page Press the track button for the desired track to make that button blink before you begin recording. Press the track button for the desired track to make that button indicator blink before you begin recording. p. 177 Touch the track button for the track you want to record in the Rec/Play screen, stopping the button from flashing. On Rec/Play screen, touch the track button for the desired track to make that button indicator blink before you begin recording. p. 177 Any performance that has been recorded is deleted when the power to the unit is turned off. It is not possible to recover performance data that has been lost. Before you turn off the power, save the performance data in the Favorites (user memory), USB memory, or a floppy disk. p. 180 - Recording is not Possible Problem Recording is not possible (If you wish to erase a previouslyrecorded track and then rerecord.) The recorded performance has disappeared 269 Troubleshooting Tempo not changing even when the source tempo is reselected (when arranging Rhythms using the Rhythm Customize function) Auto Std Tempo (Auto Standard Tempo) is set to on. When the Auto Std Tempo setting is set to ON and Rhythms are switched while the Rhythm is stopped, the tempo is automatically set to the tempo for that Rhythm. The tempo setting does not change automatically, even if the Rhythms are switched with the Auto Std Tempo setting set to OFF and the Rhythm stopped. Page Appendices Problem AT-800_e.book 270 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Troubleshooting - Problems with Playback Functions Problem Check Moving your hand over the D Beam controller does not produce a sound If a D Beam button is lit in red, moving your hand above the D Beam controller will apply an effect to the sound you play from the Upper keyboard. Press the D Beam button once again so the button is lit in green. p. 155 Can’t use the function assigned to the foot switch If “Registration Shift” (change Registrations) is “RIGHT,” “LEFT,” or “RIGHT + Load Next,” the foot switch will be dedicated to switching the Registration. Turn “Registration Shift” off. p. 135 The damper pedal affects only the Lower keyboard and Upper keyboard. The damper pedal does not affect the Bass pedalboard. You can change the settings so that the damper pedal affects the Upper keyboard. p. 212 The damper pedal does not affect the Solo voice. This is not a malfunction. The function of the Expression Pedal during recording or the function during playback has been set to “COMPOSER.” Set the expression pedal function during recording to “PEDAL,” and during playback to “PEDAL” or “PEDAL+COMPOSER.” p. 211 Check Solution Page Could you be using USB memory not made by Roland? We cannot guarantee operation if you’re using USB memory not made by Roland. --- The external memory setting is incorrect. Change the external memory setting. p. 227 Remote control does not work Could the Remote function be turned off? If the Remote function is turned off, data from the remote control will not be received. Refer to “Turning the Remote function on/ off.” p. 228 The Touch Screen doesn’t respond correctly The positioning of the Touch Screen may become displaced if some time has passed since it was last used. Reposition the Touch screen. p. 230 Unable to save created Rhythm to the User Memory “Memory Full” appears in the display. The available memory remaining in the ATELIER is not sufficient. First delete some other Rhythm saved to the user memory, then save the Rhythm you have created to the user memory once again. p. 207 p. 208 Damper Pedal does not operate Expression Pedal does not operate Solution Page --- Other Problems Problem Can’t read/write USB memory 270 AT-800_e.book 271 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Error Message Appendices Meanings Error Message To protect the copyright, this music file cannot be saved as SMF format. Write-Protected Media. The protect tab of the storage media is set to the Protect (write prohibit) position. Move the tab to the Write (write permit) position and try the operation again. Can’t Save This Song. You can only play the music data. It cannot be saved on a storage media. Master Disk This storage media does not allow initialization or saving. Insert a different storage media and try the operation again. Read Only File. You cannot overwrite-save or delete a file on this storage media. No Media Storage media is not connected. Please connect storage media. Media Full Saving is not possible because the storage media does not have enough space. Please use other storage media that has been formatted by the ATELIER. Unknown Media This storage media cannot be used. Please format it. Media Ejected The storage media was disconnected while it was being accessed. Please try the operation again. Damaged Media A damaged area was found on the storage media. Can’t Read This data cannot be read. Can’t Play Playback was halted because the song could not be read fast enough. The song could not be read from the storage media fast enough for playback. Press the [Reset] button, then press the [Play/Stop] button once again. No Rhythm Designated positions are incorrect. Error Message Copy Protected. Can’t Save. There is no Rhythm in user memory. The Rhythm used by the selected Registration was deleted from user memory, or its order was changed. When calibrating the touch panel, the appropriate point was not touched correctly. If you touch a location other than the specified point, the discrepancy may become severe. Please be sure to touch the correct point. The song data is excessively large, and cannot be loaded. Memory Full The performance data is excessively large, and cannot be loaded. Recording or editing is not possible because the memory of the ATELIER is full. MIDI Buffer Full Communication Error The ATELIER cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the amount of MIDI data sent to the ATELIER. A MIDI cable or computer cable has been disconnected. Connect it properly and securely. The ATELIER is unable to handle the data that was sent. Please send data that the ATELIER is able to handle. A MIDI transmission error has occurred. Data transfer failed. Please transfer the data again. Memory Error An error occurred in internal memory. Please perform the operation again. If this indication appears even after you’ve repeated the operation several times, please contact Roland service. Not found A Rhythm or Registration that meets the conditions was not found. This is registration data of a type that is not supported. This instrument cannot use this Registration. The Ext Memory port was subjected to excessive current. USB memory not supported by the ATELIER was connected. This USB memory cannot be used with the ATELIER. 271 AT-800_e.book 272 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Chord List ● symbol: Indicates the constituent not of chord. ★ symbol: Chord shown with an “★”can be played by pressing just the key marked with the “★.” Chord 1.eps 272 C C# D E E F Cmaj7 C#maj7 Dmaj7 E maj7 Emaj7 Fmaj7 C7 C#7 D7 E 7 E7 F7 Cm C#m Dm E m Em Fm Cm7 C#m7 Dm7 E m7 Em7 Fm7 Cdim C#dim Ddim E dim Edim Fdim Cm7 5 C#m7 5 Dm7 5 E m7 5 Em7 5 Fm7 5 Caug C#aug Daug E aug Eaug Faug Csus4 C#sus4 Dsus4 E sus4 Esus4 Fsus4 C7sus4 C#7sus4 D7sus4 E 7sus4 E7sus4 F7sus4 C6 C#6 D6 E 6 E6 F6 Cm6 C#m6 Dm6 E m6 Em6 Fm6 AT-800_e.book 273 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Chord List Appendices ● symbol: Indicates the constituent not of chord. ★ symbol: Chord shown with an “★”can be played by pressing just the key marked with the “★.” Chord 2.eps G A A B B F#maj7 Gmaj7 A maj7 Amaj7 B maj7 Bmaj7 F#7 G7 A 7 A7 B 7 B7 F#m Gm A m Am B m Bm F#m7 Gm7 A m7 Am7 B m7 Bm7 F#dim Gdim A dim Adim B dim Bdim F#m7 5 Gm7 5 A m7 5 Am7 5 B m7 5 Bm7 5 F#aug Gaug A aug Aaug B aug Baug F#sus4 Gsus4 A sus4 Asus4 B sus4 Bsus4 F#7sus4 G7sus4 A 7sus4 A7sus4 B 7sus4 B7sus4 F#6 G6 A 6 A6 B 6 B6 F#m6 Gm6 A m6 Am6 B m6 Bm6 Chord List F# 273 AT-800_e.book 274 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Glossary Arrangement Panel Settings This refers to changes that have been made in an original tune, by adding a new accompaniment or by changing the instruments used. Settings such as sound selections, tempo, Rotary fast/slow. Automatic Accompaniment An effect that smoothly raises or lowers the pitch. Automatic Accompaniment is Automatic Accompaniment when just a few keys in the lower section of the keyboard are pressed to specify the chord. Registration Basic Chord This refers to the most commonly used types of chord, which are generally the following six types: major chords, minor chords, minor seventh chords, minor seventh (5) chords, dominant seventh chords, and diminished seventh chords. Chord Notes of two or more pitches sounded simultaneously. Chords consisting of three notes are called “triads,” and are the most basic type of chord. Chorus An effect that adds spaciousness and richness to the sound. Ending This is the last part of the accompaniment. When you stop playing the Automatic Accompaniment, the ATELIER plays an Ending appropriate for the Rhythm. Pitch Bend A set of data that specifies the state of the instrument when performing, including sounds and panel settings. Reverb An effect that simulates the reverberation of a room or concert hall. Root Note The root note is the basis of a chord. All chords are built on a root note, which is the part of the chord name given in uppercase letters. Rotary An effect which simulates the modulation given to the sound when a rotating speaker is used. The Rotary effect produces two types of modulation: fast or slow. Sound Generator This is the section that produces the sound. The ATELIER series uses a sound generator that is compatible with GM2/GS. Glide Split An effect that temporarily lowers the pitch and then gradually returns it to normal. A function which allows the keyboard to be divided into two or more areas, and a different sound assigned to each area. The point at which the keyboard is divided is called the “Split Point.” Intro This is the introductory portion of an Automatic Accompaniment performance. When Automatic Accompaniment begins, the ATELIER can add an appropriate intro for each Rhythm. Inversion When the lowest note of a chord is the root, the chord is said to be in “root position.” In contrast, forms of a chord in which other notes are the lowest pitch are called “inversions.” Mute To silence a sound. The ATELIER provides a Track Mute function that allows you to turn off the track button indicator of a track on which music data has been recorded, so that the corresponding track will temporarily be silenced. 274 Sustain An effect that adds a decay to each note. The ATELIER allows sustain to be applied to the voices of the upper part, lower part, and pedal part. Vibrato An effect that cyclically modulates the pitch. Voice The ATELIER is able to produce the sounds of various instruments. These sounds are called “Voices.” AT-800_e.book 275 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Music Files That the ATELIER Can Use Regarding Copyright Use of the internal songs and audio files for any purpose other than private, personal enjoyment without the permission of the copyright holder is prohibited by law. Additionally, this data must not be copied, nor used in a secondary copyrighted work without the permission of the copyright holder. Please be aware that if you create derivative works that are based on existing copyrighted material, such as commercially available SMF music files, such works may violate copyright law if used for any purpose other than personal enjoyment. Roland takes no responsibility for any copyright violation you may commit by creating such works. ■ The ATELIER Allows You To Use the Following Music Files VIMA TUNES VIMA TUNES is a Roland specification for music files that contains image and lyric data, allowing you to enjoy songs with lyrics and images simultaneously. When data bearing the “VIMA TUNES” logo is played back on a device that bears the same logo, lyrics can be shown on the screen of a connected external display or television, letting you enjoy karaoke or watch a slide show. SMF Music Files SMFs (Standard MIDI Files) use a standard format for music file that was formulated so that files containing music file could be widely compatible, regardless of the manufacturer of the listening device. An enormous variety of music is available, whether it be for listening, for practicing musical instruments, for Karaoke, etc. SMF with Lyrics “SMF with Lyrics” refers to SMF (Standard MIDI File) that contains the lyrics. When Music Files carrying the “SMF with Lyrics” logo are played back on a compatible device (one bearing the same logo), the lyrics will appear in its display. The ATELIER come equipped with GM 2/GS sound generators. ■ About the ATELIER Sound Generator The ATELIER come equipped with GM 2/GS sound generators. General MIDI The General MIDI is a set of recommendations which seeks to provide a way to go beyond the limitations of proprietary designs, and standardize the MIDI capabilities of sound generating devices. Sound generating devices and music files that meets the General MIDI standard bears the General MIDI logo. Music files bearing the General MIDI logo can be played back using any General MIDI sound generating unit to produce essentially the same musical performance. General MIDI 2 The upwardly compatible General MIDI 2 recommendations pick up where the original General MIDI left off, offering enhanced expressive capabilities, and even greater compatibility. Issues that were not covered by the original General MIDI recommendations, such as how sounds are to be edited, and how effects should be handled, have now been precisely defined. Moreover, the available sounds have been expanded. General MIDI 2 compliant sound generators are capable of reliably playing back music files that carry either the General MIDI or General MIDI 2 logo. In some cases, the conventional form of General MIDI, which does not include the new enhancements, is referred to as “General MIDI 1” as a way of distinguishing it from General MIDI 2. GS Format The GS Format is Roland’s set of specifications for standardizing the performance of sound generating devices. In addition to including support for everything defined by the General MIDI, the highly compatible GS Format additionally offers an expanded number of sounds, provides for the editing of sounds, and spells out many details for a wide range of extra features, including effects such as reverb and chorus. Designed with the future in mind, the GS Format can readily include new sounds and support new hardware features when they arrive. Since it is upwardly compatible with the General MIDI, Roland’s GS Format is capable of reliably playing back GM Scores equally as well as it performs GS music files (music files that have been created with the GS Format in mind). This product supports both the General MIDI 2 and the GS Format, and can be used to play back music data carrying either of these logos. XGlite XG is a tone generator format of YAMAHA Corporation, that defines the ways in which voices are expanded or edited and the structure and type of effects, in addition to the General MIDI specification. XGlite is a simplified version of XG tone generation format. You can play back any XG music files using an XGlite tone generator. However, keep in mind that some music files may play back differently compared to the original files, due to the reduced set of control parameters and effects. 275 Music Files That the ATELIER Can Use Music files contains musical information such as how long the key for a corresponding pitch is played, the force applied to the key played, and other such information. Performance data is transmitted to the ATELIER from music files saved in USB memory and CD-ROM, and played back without change as songs. This is different than a audio CD, since the music file does not contain a recording of the sound itself. This makes it possible to change tempos and keys freely, allowing you to use it in many different ways. Appendices What Are Music Files? AT-800_e.book 276 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Settings That Are Stored After the Power Is Turned Off Settings That Are Stored After the Power Is Turned Off Arranger Update Aspect Ratio Auto Std Tempo (Auto Standard Tempo) Aux Out Mode D Beam Sensitivity Display Brightness Exp. Curve (Expression Curve) Lyrics Main Background Main Bouncing Ball Master Tune Metronome Sound Mic Echo MIDI IN Mode NTSC/PAL Registration Shift Remote Control Remote Control: FUNC1, 2 Rhythm Mode Rotary Color Rotary Speed Send PC Switch Trans. Update (Transpose Update) USB Driver Registration Name EZ Touch Settings That Are Stored In the Registration Buttons Registration Name Registration Shift Arranger Update Trans. Update (Transpose Update) Exp. Curve (Expression Curve) Rhythm Mode Settings That Are Stored In the Individual Registration Buttons Reverb Type Reverb Depth Solo [To Lower] button (ON/OFF) Pedal [To Lower] button (ON/OFF) Transpose [-] [+] buttons (Key Transpose) L Foot Switch Assignment (Left Foot Switch Assignment) R Foot Switch Assignment (Right Foot Switch Assignment) Damper Pedal (Damper Pedal Assignment) 276 [Harmony Intelligence] buttons (ON/OFF) Harmony Intelligence Type Rotary [Fast/Slow] button (ON/OFF) Rotary [On/Off] button (ON/OFF) Bender/Vibrato Pitch Bend Range Pedal Bass Mode Solo Mode Solo To Lower Mode Solo Split Point [Bass Split] button (ON/OFF) Bass Split Point Sustain ON/OFF Sustain Length Tx MIDI Channel After Touch ON/OFF After Touch Sens (After Touch Sensitivity) Initial Touch (Initial Touch Sensitivity) Vintage Organ Type Vintage Flute Volume PC Number (Program Change Number) Bank LSB (Bank Select LSB) Bank MSB (Bank Select MSB) Wall Type The Voices assigned for each part Level [ ▲ ][ ▼ ] buttons (Part Balance Volume) The Reverb depth for each part The Chorus settings (ON/OFF) for each part The Octave shift settings for each part The voices assigned to the [Others] buttons for each part [Drums/SFX] button (ON/OFF) Drum/SFX Set [Manual Percussion] button (ON/OFF) Manual Percussion Set Selected Rhythm [Intro] button (ON/OFF) [Ending] button (ON/OFF) [Sync Start] button (ON/OFF) Variation Chord Intelligence ON/OFF Chord Hold ON/OFF Leading Bass ON/OFF Arranger [ON/OFF] button (ON/OFF) Lower Voice [Hold] button (ON/OFF) Tempo setting Volume of the Rhythm Accompaniment part Reverb depth of the Rhythm Accompaniment part Volume of the Rhythm drum part Reverb depth of the Rhythm drum part Volume of the Rhythm bass part Reverb depth of the Rhythm bass part AT-800_e.book 277 ページ ２００８年１０月１５日　水曜日　午前９時３７分 MIDI Implementation Chart Roland Organ MIDI Implementation Chart Model AT-800 Transmitted Function... 1 2 3 4 11 13 16 Default Recognized (Solo) (Pedal) (Lower) (Upper) (Drums/SFX) (Manual Percussion) (Expression, PC, V-LINK) 1 (Solo) 2 (Pedal) 3 (Lower) 4 (Upper) 11 (Drums/SFX) 13 (Manual Percussion) 16 (Expression) 1–16 (GM2/GS) X Changed 1–16 Mode Default Messages Altered x x ************** Mode 3 Mode 3, 4 (M=1) Note Number : True Voice 24–110 ************** 0–127 0–127 Velocity Note ON Note OFF O x 8n v=64 After Touch Key's Ch's x x Pitch Bend 0, 32 1 5 6, 38 7 10 11 16 64 65 66 67 71 72 73 74 75 76 77 84 91 93 98, 99 100, 101 Control Change Prog Change : True # System Exclusive Version : 1.00 *1 Remarks Appendices Basic Channel Date: July 1, 2007 *5 *5 *5 *5 *5 *5 *5 *6 * 10 O x O O *2, 8 *2, 7, 8, 9 O *11 O *2, 7, 8, 9 O x x x O x O x O x x x x x x O x x x x x x x x *1 O O O O O O O O O O O O O O O O O O O O O O O O *3, *2, *2, *2, *2, *3, *3, *4 *3, *3, *2, *2, *7 *7 *7 *7 *7 *7 *7 *2, *3, *3, *3, *2, 0–127 ************** *1 O 0–127 *3, 7, 8, 9 O *11 *11 *11 7, 7, 7, 7, 7, 7, 7, 8 8, 8 8, 8, 8, 8, 7, 7, 7, 7, 8, 9 8 8 8 9 9 9 9 9 8 7, 8 7, 8 8 7, 8, 9 x x x x x x System Real Time : Clock : Commands O O x x : : : : : : x x x x O x O (120, 126, 127) *7, 8 O *7, 8 x *7, 8, 9 O (123–125) O x Notes Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY * * * * * * 1 2 3 4 5 6 O x is selectable. O x is selectable by SysEx. (GS Part) Not received in the keyboard part Can be received in the keyboard part With MIDI IN Mode 2 With MIDI IN Mode 1 Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO Hold 1 Portamento Sostenuto Soft Resonance Release Time Attack Time Cutoff Decay Time Vibrato Rate Vibrato Depth Portamento control Effect1 depth Effect3 depth NRPN LSB, MSB RPN LSB, MSB O : Song Pos : Song Sel : Tune All sound off Reset all controllers Local Control All Notes OFF Active Sense Reset General purpose controller 1 (Glide) Program number 1–128 System Common Aux Message Bank select Modulation Portamento time Data entry Volume Panpot Expression * * * * * 7 8 9 10 11 Received in GM2 mode Received in GS mode Received in General MIDI mode Recognize as M=1 even if M≠1. V-LINK O : Yes X : No 277 AT-800_e.book 278 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Demo Song List Song Title Composer Player Copyright Art.Violin Hector Olivera Hector Olivera © 2007 Roland Corporation Jazz Organ Akio Sasaki Akio Sasaki © 2007 Roland Corporation Art.Cello Hector Olivera Hector Olivera © 2007 Roland Corporation Donau Wellen Iosif Ivanovici Yuri Tachibana © 2007 Roland Corporation Art.Trombone Hector Olivera Hector Olivera © 2007 Roland Corporation Film Score Hector Olivera Hector Olivera © 2004 Roland Corporation VivaTheater! Tony Fenelon Tony Fenelon © 2004 Roland Corporation Accordions Ralf Schink Ralf Schink © 2004 Roland Corporation Greensleeves Traditional Yuri Tachibana © 2004 Roland Corporation Pop Organ Ralf Schink Ralf Schink © 2004 Roland Corporation Pops Orch. Hector Olivera Hector Olivera © 2004 Roland Corporation Jazz Combo Ric Iannone Ric Iannone © 2003 Roland Corporation Slow Waltz Ric Iannone Ric Iannone © 2003 Roland Corporation Hawaiian Ric Iannone Ric Iannone © 2003 Roland Corporation Dixieland Ric Iannone Ric Iannone © 2003 Roland Corporation Soft Gospel Ric Iannone Ric Iannone © 2001 Roland Corporation Pipe Organ Hector Olivera Hector Olivera © 1999 Roland Corporation Orchestra Hector Olivera Hector Olivera © 2001 Roland Corporation Soprano W.A.Mozart Hector Olivera © 2001 Roland Corporation Tenor Ric Iannone Ric Iannone © 1999 Roland Corporation Jazz Scat Ric Iannone Ric Iannone © 1999 Roland Corporation * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. * No data for the music that is played will be output from MIDI Out connector. 278 AT-800_e.book 279 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Demo Song List Appendices Profile Demo Song List Akio Sasaki After graduating from the Berklee College of Music in Boston as a principle, Akio has been active as a top jazz organ player in Japan. He performs live throughout the country, and also teaches at the Senzoku Gakuen College of Music and at the Kyoto Musical Academy. Additionally, he has published numerous arrangements, works of music theory, and music education books. In 2005 he released his own trio’s CD album “Glide in Blue,” receiving high praise not only from organ fans but also from many jazz fans. In 2007 he released his new album “Fly by Night,” and his musical career continues to expand. Hector Olivera Hector Olivera was born in Argentina. He received his education at the Conservatory and the University of Buenos Aires followed by a scholarship at the famous Juilliard School of Music in New York. Olivera has performed extensively throughout the world including concerts at prestigious places such as the Notre Dame Cathedral in Paris and Carnegie Hall in New York. Hector Olivera’s expertise involves both the traditional pipe organ and the electronic organ. Presently Olivera tours internationally playing some of the world’s most magnificent pipe organs as well as his preferred electronic organ, the Roland ATELIER for which he continues to collaborate with its development. Ralf Schink Ralf Schink was born in Germany and began playing the electronic organ at the age of 9. After completing his formal education Ralf went on to study at the renowned Swiss Jazz School in Bern, Switzerland as well as the Berklee College of Music in Boston. Since then, his energetic, contemporary style has won him many accolades throughout Europe and around the world. Ralf regularly performs at the Frankfurt Musik Messe, the largest musical fair in Europe. A tremendously versatile and gifted musician, Ralf is comfortable with all types of music. From pop to jazz, Ralf’s repertoire appeals to all age groups. Since 1992 Ralf has been working and touring for Roland Europe as demonstrator and product consultant. He regularly tours Europe, Asia and Canada. Ric Iannone Ric Iannone began playing the piano and accordion at the age of two and a half. By the time he was seven, he was performing public and private engagements with his musician father. For more than 20 years Ric has performed and traveled extensively throughout the United States and Europe, delighting audiences with his unique playing style and music arrangements. He is equally comfortable playing the organ, piano or keyboard, as a concert artist and product demonstrator. 279 AT-800_e.book 280 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Demo Song List Tony Fenelon Tony Fenelon studied at the Conservatory of Music in Melbourne, Australia under famed teacher Roy Shepard. An internationally acclaimed artist, Tony has completed eighteen major concert tours overseas including the United States, U.K. and Japan. He has released seventeen albums, including four gold records. Tony has also been featured regularly as a solo pianist with the Australian Philharmonic Orchestra and the Australian Pops Orchestra. In June of 2003, Tony learned that he had been awarded the distinction of “Organist for the Year 2002” by the American Theatre Organ Society, and 2004 was awarded the distinction of the Medal of the Order of Australia in Queen Elizabeth’s Birthday Honours List for his contributions in music. Yuri Tachibana Although Yuri Tachibana began playing the piano at age 3, she switched completely to the organ after winning First Prize in an organ competition. She has expanded her work to include a variety of activities, releasing two albums on Columbia Records and performing organ regularly on the “11 PM” TV program for four years. She further contributes articles on a wide range of musical genres, including classical and jazz, is an accomplished arranger, and has published numerous scores. In 2002, King Records released Yuri’s album “Organ Chat,” all songs of which were performed and recorded using the Roland Organ Music ATELIER. The album was acclaimed for its unique arrangements and sure playing, prompting the release of “Organ Chat 2” in 2005. Currently, her musical activities range beyond Japan to include the United States, Europe, China, and Southeast Asia, and she has appeared on numerous CDs from King Records and other record companies as a recording arranger. 280 AT-800_e.book 281 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Short Cut List Short Cut Screen/Setting Short Cut List While the Quick Guide screen is displayed, Appendices Quick Guide Function Expression Pedal Controller screen/Exp. Curve (Expression Curve) [Bender/Vibrato] lever Controller screen Bender/Vibrato Upper Keyboard Upper Keyboard screen/After Touch Lower Keyboard Split Point screen Pedalboard Pedalboard screen/Pedal Bass Mode Left Foot Switch Right Foot Switch Controller screen/ L Foot Switch (Left Foot Switch) R Foot Switch (Right Foot Switch) Damper Pedal Controller screen/Damper Pedal [Solo To Lower] button Split Point screen [Bass Split] button Split Point screen Sustain [Pedal] button Pedalboard screen/Sustain Length Rotary [On/Off] button Effect screen/Rotary Color Rotary [Slow/Fast] button Effect screen/Rotary Speed [Count Down] button Rhythm Options screen/Count Down Sound Upper Voice select buttons Solo Voice select buttons [Alternate] button Upper Keyboard screen Lower Voice select buttons [Alternate] button Lower Keyboard screen Pedal Voice select buttons Pedalboard screen Registration [Write] button Registration Options screen/Arranger Update [One Touch Program] button Factory Reset screen [Harmony Intelligence] buttons Panel Reset screen [Song] button Song Clear screen (If the performance data has never been saved to a USB memory or “Favorites,” the Song Clear screen appears.) 281 AT-800_e.book 282 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Main Specifications AT-800: MUSIC ATELIER Keyboard Sound Generator Rhythm Upper 56 keys (C3–G7) Lower 76 keys (Waterfall keyboard, E1–G7) Pedal 20 keys (C2–G3) Initial Touch Upper, Lower (10 levels for each) After Touch Upper (10 levels) Sound Generator Conforms to GENERAL MIDI Level 2, GENERAL MIDI System, GS and XGlite format Max.Polyphony 384 Voice 450 Voices (Included 4 Articulation Voices and 31 Active Expression Voices) Upper Part Organ, Symphonic, Orchestral Lower Part Organ, Symphonic, Orchestral Solo Part Solo Pedal Part Organ, Orchestral Vintage Organ Flute (with harmonic bars), Pipe, Theater Rhythm 250 Rhythms in 10 groups x 4 variations User Rhythm 99 Rhythms Rhythm Customize Pattern editing of the internal Rhythms (Drum Set, Beat, Tempo, Note) Arranger Function Tempo, Arranger On/Off, Start/Stop, Sync Start, Intro, Ending, Intro Count Down, Break, Auto Fill In, Variation (4 variations), One Touch Program, Chord Intelligence, Chord Hold, Leading Bass, Auto Standard Tempo, Rhythm Mode Music Assistant 525 titles x 4 variations One Touch Program 250 Rhythms x 2 groups x 4 variations Quick Registration 216 settings in 11 groups Drums/SFX Sets 18 Drum Sets + 1 SFX Set Manual Percussion Sets 14 sets Harmony Intelligence 25 types Master Tuning 415.3 Hz–466.2 Hz (0.1 Hz steps) Key Transpose -4–+7 (in semitones) Playback Transpose -6–+5 (in semitones) Effects Rotary Sound, Chorus, RSS Reverb, Sustain, Vibrato, Pitch Bend, Glide Registration 282 Registration 12 memories Function Load Next, File Edit AT-800_e.book 283 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Main Specifications Note Storage Approx. 40,000 notes Song Length Max. 999 measures Tempo 20–500 Resolution 120 ticks per quarter note Recording Realtime (Replace, Punch In/Out, Loop) Edit Function Delete Measure, Delete Track, Erase, Copy, Quantize DigiScore (Expanded Display, Lyrics Display, Change of Part Displayed, Note Name Display, Change Clef) Media File Storage Rated Power Output Speaker USB flash memory, floppy disk (in the case of using optional USB floppy disk drive FD-01A) Save Format MUSIC ATELIER original format, SMF format 0 Songs Max. 99 songs for each folder 10 W+10 W+60 W+60 W+100 W Full-range (small) 8 cm x 2 Full-range (large) 16 cm x 4 Woofer 30 cm x 1 Display Graphic 800 x 480 dots backlit color LCD with touch screen Pedals, Switches Damper Pedal, Expression Pedal, Foot Switch: 2 pcs. (on the expression pedal, function assignable) Connectors Main Specifications Score Display 7 tracks Appendices Composer Tracks Audio Output Jacks (L/mono, R), Aux/Drums Output Jacks (L/mono, R), Bass Output Jack (mono), Audio Input Jacks (L/mono, R), Video Output Jacks (Analog RGB, Video), Phones Jacks (stereo) x 2, Mic Input Jack, MIDI Connectors (In, Out), USB Jack, External Memory Connector (USB Flash Memory Connector), Ext Drive Connector, AC Inlet Power Supply AC 117 V, 230 V, 240 V Power Consumption 420 W Finish Satin Walnut Console (included Music Rest) Stand Dimensions Total Bench 1,350 (W) x 694 (D) x 610 (H) mm 53-3/16 (W) x 27-3/8 (D) x 24-1/16 (H) inches 1,329 (W) x 641 (D) x 755 (H) mm 52-3/8 (W) x 25-1/4 (D) x 29-3/4 (H) inches 1,350 (W) x 694 (D) x 1,328 (H) mm 53-3/16 (W) x 27-3/8 (D) x 52-5/16 (H) inches 700 (W) x 350 (D) x 600 (H) mm 27-9/16 (W) x 13-13/16 (D) x 23-5/8 (H) inches 283 AT-800_e.book 284 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Main Specifications Weight Accessories Console 78 kg / 172 lbs Stand 68 kg / 150 lbs Total 146 kg / 322 lbs Bench 8.5 kg / 19 lbs Music Rest, 2 screws for the Music Rest, Code Hook, Panel Sheet, Power Code, Pedalboard, Bench, Remote Controller, Dry-cell Battery x 2, Owner’s Manual, Voice & Rhythm Guide Stereo Headphones USB Flash Memory Options USB Floppy Disk Drive CD Drive Holder (DH-01) Microphone * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 284 AT-800_e.book 285 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Index B Basic Chord .................................................................. 274 Bass ................................................................................ 242 Bass Split ....................................................................... 161 Bender/Vibrato ............................................................ 212 BMP Installer ................................................................. 234 Bouncing Ball .................................................................. 29 Break ........................................................................ 89, 134 Brightness Rotary Effect ............................................................ 143 Brilliance ........................................................................ 131 C Calibration Touch Screen ........................................................... 230 CD-DA ............................................................................ 263 Chord ............................................................................. 274 Chord Hold ................................................................... 214 Chord Intelligence .......................................................... 90 Chord Name Main Screen .............................................................. 29 Chorus ........................................................................... 274 Chorus Effect ................................................................. 144 code hook ....................................................................... 24 Composer ...................................................................... 164 Computer ....................................................................... 244 Connecting Audio Equipment .................................................... 243 Computer ................................................................. 244 Copying Measure ................................................................... 195 D D Beam Controller ........................................................ 154 D Beam Controller sensitivity ...................................... 213 Damper Pedal ....................................................... 131, 211 Decay ............................................................................. 131 Delete Graphic .................................................................... 235 Measure ................................................................... 190 Performance Songs ................................................. 182 Registrations ............................................................ 122 Rhythms Stored in User Memory ........................... 104 Track ......................................................................... 191 Demo Song ...................................................................... 33 Demo Song List ............................................................. 278 Depth Expression Pedal ..................................................... 137 Disk Rhythm ..................................................................... 96 Drums/SFX ...................................................................... 76 Drums/SFX Sets .............................................................. 77 E Editing ............................................................................ 190 Performance Data ................................................... 190 Effects ............................................................................. 138 Ending ............................................................................ 274 Erase Performance Song .................................................. 178 Erase Event .................................................................... 193 Exp. Curve ..................................................................... 137 Exp. Src (Play) ............................................................... 212 Exp. Src (Rec) ................................................................ 211 Expression Pedal .......................................................... 136 Function .................................................................... 211 External Display Connecting .............................................................. 247 EZ One Finger ................................................................ 44 EZ Touch .......................................................................... 44 F Factory Reset ................................................................... 25 Favorites ........................................................................ 256 Feet ................................................................................... 55 285 Index Active Expression Voice ................................................ 69 AEx Voice ........................................................................ 69 Aftertouch ...................................................................... 209 Alternate .......................................................................... 48 Arrangement ................................................................. 274 Arranger function ........................................................... 88 Arranger Update .......................................................... 217 Art.Cello .......................................................................... 66 Art.TenorSax ................................................................... 68 Art.Trombone .................................................................. 67 Art.Violin ......................................................................... 66 Articulation Voice ............................................... 61–62, 64 Aspect Ratio .................................................................. 238 Audio CD ...................................................................... 263 Auto Standard Tempo .................................................. 215 Automatic Accompaniment ................................... 88, 274 Aux Out ......................................................................... 249 Aux Out Mode .............................................................. 249 Aux/Drums .................................................................... 242 Performance Song .................................................. 188 Registration ...................................................... 126, 128 Rhythm .................................................................. 97, 99 Rhythms on Disks into User Memory .............. 97, 188 Correct Timing .............................................................. 196 Count Down .................................................................... 88 Count Down Sound ...................................................... 214 Count In ......................................................................... 175 Count-In Recording ....................................................... 187 Appendices A AT-800_e.book 286 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Index File Edit ............................................................ 45, 124, 126 Fill In ................................................................................. 89 Foot Switch ............................................................ 133–134 Format ............................................................................ 233 G General MIDI ................................................................ 275 General MIDI 2 ............................................................ 275 Glide ...................................................................... 134, 274 Gloal Settings EZ One Finger ........................................................... 44 EZ Touch .................................................................... 44 Global Settings ............................................................... 44 GS .................................................................................. 275 GS Format ..................................................................... 275 H Harmony Intelligence ................................................... 138 H-Bar Manual .................................................................. 58 Headphones .................................................................... 23 Hold ................................................................................. 80 Human Voice .................................................................. 70 I Illumination .................................................................... Initial Touch Sensitivity ................................................. Input ............................................................................... Intro ................................................................................ Inversion ........................................................................ 242 210 242 274 274 K Key Transpose .............................................................. 130 L Leading Bass ........................................................... 92, 134 Load Individual Registration ............................................ 117 Performance Songs ................................................. 181 Set of Registrations ................................................. 116 Load Next Registrations ............................................... 120 Loop Recording ............................................................. 186 Lower Voice .............................................................. 49, 80 Lower Voice Hold ........................................................... 80 Lyrics .............................................................................. 218 M Main ............................................................................... 242 Main Screen .................................................................... 29 Background ............................................................. 227 Bouncing Ball .......................................................... 226 Manual Perc .................................................................... 78 286 Manual Percussion ......................................................... 78 Manual Percussion Sets ................................................. 79 Master Tune ................................................................... 222 Master Volume ................................................................ 23 Measure Copy ......................................................................... 195 Delete ....................................................................... 190 Metronome .................................................................... 219 Metronome Beat ........................................................... 220 Metronome Sound ........................................................ 220 Metronome Volume ...................................................... 219 Mic ................................................................................. 242 jack ............................................................................. 24 Mic Echo ........................................................................ 223 Mic Volume ..................................................................... 24 Microphone ..................................................................... 24 MIDI ................................................................................ 246 MIDI Devices Connecting .............................................................. 246 MIDI IN Mode ............................................................... 224 MIDI In/Out ................................................................... 242 Music Assistant ............................................................... 37 Main Screen .............................................................. 29 Music Assistant Search .................................................. 39 Music CD ............................................................... 263–264 Music Files ..................................................................... 275 Mute ............................................................................... 274 N Notation ......................................................................... 171 O Octave Shift ..................................................................... 74 One Touch Program ................................................. 94–95 Output ............................................................................ 242 P Panel Reset .................................................................... 232 Panel Settings ................................................................ 274 Part Balance .................................................................... 72 Part Balance Monitor ..................................................... 73 PC Number ................................................................... 224 Pedal ................................................................................ 50 Pedal Bass Voice ............................................................ 50 Pedal To Lower ............................................................. 163 PedalBass Mode ........................................................... 210 Pedalboard Polyphony ................................................ 210 Percussion ........................................................................ 57 Performance Recommended Tones .............................................. 262 Phones ............................................................................ 242 jack ............................................................................. 23 AT-800_e.book 287 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Index 41 42 30 35 29 R Rec/Play Main Screen .............................................................. 30 Recall Registration .............................................................. 108 Recommend Tone ......................................................... 262 Recording ...................................................................... 164 Each Part Separately .............................................. 176 Performance ............................................................ 174 Re-Recording ........................................................... 177 Recording onto SMF .................................................... 183 Registration ................................................................... 274 Arranger Update .................................................... 109 Main Screen .............................................................. 30 Recall ........................................................................ 108 Rename .................................................................... 124 Storing Registrations ............................................... 107 Registration Shift ........................................................... 135 Remote Control ..................................................... 253, 256 Rename Performance Song .................................................. 178 Registration ...................................................... 111, 124 Saved Rhythms ........................................................ 102 Re-Recording ................................................................. 177 Reverb ............................................................................ 274 Reverb Effect ................................................................. 149 Depth of the Reverb ........................................ 152–153 Reverb Type ............................................................. 150 Wall Type ................................................................ 151 RGB ................................................................................ 242 Rhythm ............................................................................. 81 S Saving Performance Songs ................................................. 180 Registration Sets ...................................................... 113 User Rhythms ........................................................... 208 Search Rhythm ........................................................................ 83 Send PC Switch ............................................................ 223 Sensitivity Aftertouch ................................................................. 209 Slide Show .................................................................... 239 SMF Music Files .................................................... 167, 275 SMF with Lyrics ............................................................. 275 Solo .................................................................................. 51 Alternate ..................................................................... 51 To Lower ................................................................... 158 Solo Mode ..................................................................... 159 Solo To Lower ............................................................... 158 Solo Voice ....................................................................... 51 Sort Registration .............................................................. 124 Sound Generator .................................................. 274–275 Sound/KBD Main Screen .............................................................. 30 Split ................................................................................ 274 Split Point Bass Split Point ........................................................ 162 Solo Split Point ........................................................ 160 Sub-window ............................................................... 31–32 Sustain ........................................................................... 274 Sustain Effect ................................................................. 146 Sustain Length ......................................................... 148 Sync Start ......................................................................... 86 System Main Screen .............................................................. 30 T Television Connecting .............................................................. 247 Television Format .......................................................... 237 Tempo .............................................................................. 87 287 Index Q Quick Guide ................................................................... Index menu ................................................................ Main Screen .............................................................. Quick Registration .......................................................... Main Screen .............................................................. Count Down ............................................................... 88 Customize ................................................................ 198 fill-in ............................................................................ 89 Main Screen .............................................................. 29 One Touch Program ................................................. 95 Rhythm Mode ................................................................ 215 Rotary ............................................................................. 274 Rotary Effect .......................................................... 134, 141 Rotary Color ............................................................ 143 Rotary Speed ........................................................... 142 Appendices Pitch Bend ...................................................................... 274 Pitch Bend Range ......................................................... 213 Pitch Bend/Vibrato ....................................................... 132 Playback Transpose ..................................................... 218 Playing Demo Song ................................................................ 33 Performance Song .................................................. 175 Performance Songs Stored on Floppy Disk ......... 167 Rhythm ........................................................................ 85 Power On ........................................................................ 22 Produce a Sound Effect D Beam Controller .................................................. 155 Punch-in Recording ....................................................... 185 AT-800_e.book 288 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Index Touch Screen .................................................................. 29 Tr. Mute (Track Mute) ................................................... 170 Track Delete ....................................................................... 191 Track Button .................................................................. 165 Track Mute .................................................................... 168 Track Mute button ......................................................... 170 Transpose Key Transpose ......................................................... 130 Main Screen .............................................................. 29 Playback Transpose ................................................ 218 Update ..................................................................... 217 Tx MIDI Ch. (MIDI Transmit Channel ......................... 225 Type of Slide Show ...................................................... 239 U Upper Voice .................................................................... 49 Upper/Lower .................................................................. 48 Alternate .................................................................... 48 USB ........................................................................ 242, 244 USB (MIDI) connector ................................................... 244 USB Driver ..................................................................... 245 User Memory .......................................................... 82, 231 User Memory Reset ...................................................... 231 User Rhythm .................................................................. 198 Save ......................................................................... 208 V VARIATION ................................................................... 134 Variation .......................................................................... 89 Vibrato ........................................................................... 274 Video ............................................................................. 242 Video Monitor ............................................................... 261 VIMA TUNES ........................................................ 258, 275 Vintage Organ ................................................................ 56 Voice ........................................................................ 47, 274 Volume Part Balance .............................................................. 72 X XGlite ............................................................................. 275 288 AT-800_e.book 289 ページ ２００８年１０月１５日　水曜日　午前９時３７分 MEMO 289 AT-800_e.book 290 ページ ２００８年１０月１５日　水曜日　午前９時３７分 Information AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-418-5531 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 SOUTH AFRICA T.O.M.S. Sound & Music (Pty)Ltd. 2 ASTRON ROAD DENVER JOHANNESBURG ZA 2195, SOUTH AFRICA TEL: (011)417 3400 Paul Bothner(PTY)Ltd. Royal Cape Park, Unit 24 Londonderry Road, Ottery 7800 Cape Town, SOUTH AFRICA TEL: (021) 799 4900 When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. PHILIPPINES CURACAO URUGUAY NORWAY JORDAN G.A. Yupangco & Co. Inc. 339 Gil J. Puyat Avenue Makati, Metro Manila 1200, PHILIPPINES TEL: (02) 899 9801 Zeelandia Music Center Inc. Orionweg 30 Curacao, Netherland Antilles TEL:(305)5926866 Todo Musica S.A. Francisco Acuna de Figueroa 1771 C.P.: 11.800 Montevideo, URUGUAY TEL: (02) 924-2335 Roland Scandinavia Avd. Kontor Norge Lilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAY TEL: 2273 0074 MUSIC HOUSE CO. LTD. FREDDY FOR MUSIC P. O. Box 922846 Amman 11192 JORDAN TEL: (06) 5692696 VENEZUELA POLAND Instrumentos Musicales Allegro,C.A. Av.las industrias edf.Guitar import #7 zona Industrial de Turumo Caracas, Venezuela TEL: (212) 244-1122 ROLAND POLSKA SP. Z O.O. UL. Gibraltarska 4. PL-03 664 Warszawa POLAND TEL: (022) 679 4419 EASA HUSAIN AL-YOUSIFI & SONS CO. Al-Yousifi Service Center P.O.Box 126 (Safat) 13002 KUWAIT TEL: 00 965 802929 PORTUGAL LEBANON Roland Iberia, S.L. Portugal Office Cais das Pedras, 8/9-1 Dto 4050-465, Porto, PORTUGAL TEL: 22 608 00 60 Chahine S.A.L. George Zeidan St., Chahine Bldg., Achrafieh, P.O.Box: 165857 Beirut, LEBANON TEL: (01) 20-1441 SINGAPORE Instrumentos Fernando Giraldez Calle Proyecto Central No.3 Ens.La Esperilla Santo Domingo, Dominican Republic TEL:(809) 683 0305 TAIWAN ECUADOR ROLAND TAIWAN ENTERPRISE CO., LTD. Room 5, 9fl. No. 112 Chung Shan N.Road Sec.2, Taipei, TAIWAN, R.O.C. TEL: (02) 2561 3339 Mas Musika Rumichaca 822 y Zaruma Guayaquil - Ecuador TEL:(593-4)2302364 THAILAND Theera Music Co. , Ltd. 100-108 Soi Verng Nakornkasem, New Road,Sumpantawongse, Bangkok 10100 THAILAND TEL: (02) 224-8821 AUSTRALIA/ NEW ZEALAND ASIA CHINA Roland Shanghai Electronics Co.,Ltd. 5F. No.1500 Pingliang Road Shanghai 200090, CHINA TEL: (021) 5580-0800 Roland Shanghai Electronics Co.,Ltd. (BEIJING OFFICE) 10F. No.18 3 Section Anhuaxili Chaoyang District Beijing 100011 CHINA TEL: (010) 6426-5050 HONG KONG Tom Lee Music Co., Ltd. Service Division 22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONG TEL: 2415 0911 Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T.S.T, Kowloon, HONG KONG TEL: 2333 1863 INDIA Rivera Digitec (India) Pvt. Ltd. 411, Nirman Kendra Mahalaxmi Flats Compound Off. Dr. Edwin Moses Road, Mumbai-400011, INDIA TEL: (022) 2493 9051 INDONESIA PT Citra IntiRama Jl. Cideng Timur No. 15J-15O Jakarta Pusat INDONESIA TEL: (021) 6324170 KOREA Cosmos Corporation 1461-9, Seocho-Dong, Seocho Ku, Seoul, KOREA TEL: (02) 3486-8855 MALAYSIA Roland Asia Pacific Sdn. Bhd. 45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIA TEL: (03) 7805-3263 VIET NAM Suoi Nhac Company, Ltd 370 Cach Mang Thang Tam St. Dist.3, Ho Chi Minh City, VIET NAM TEL: 9316540 DOMINICAN REPUBLIC SWEE LEE MUSIC COMPANY PTE. LTD. 150 Sims Drive, SINGAPORE 387381 TEL: 6846-3676 AUSTRALIA/ NEW ZEALAND Roland Corporation Australia Pty.,Ltd. 38 Campbell Avenue Dee Why West. NSW 2099 AUSTRALIA For Australia Tel: (02) 9982 8266 For New Zealand Tel: (09) 3098 715 CENTRAL/LATIN AMERICA EL SALVADOR OMNI MUSIC 75 Avenida Norte y Final Alameda Juan Pablo II, Edificio No.4010 San Salvador, EL SALVADOR TEL: 262-0788 GUATEMALA Casa Instrumental Calzada Roosevelt 34-01,zona 11 Ciudad de Guatemala Guatemala TEL:(502) 599-2888 HONDURAS Almacen Pajaro Azul S.A. de C.V. BO.Paz Barahona 3 Ave.11 Calle S.O San Pedro Sula, Honduras TEL: (504) 553-2029 MARTINIQUE Musique & Son Z.I.Les Mangle 97232 Le Lamantin Martinique F.W.I. TEL: 596 596 426860 Gigamusic SARL 10 Rte De La Folie 97200 Fort De France Martinique F.W.I. TEL: 596 596 715222 ARGENTINA MEXICO Instrumentos Musicales S.A. Av.Santa Fe 2055 (1123) Buenos Aires ARGENTINA TEL: (011) 4508-2700 Casa Veerkamp, s.a. de c.v. Av. Toluca No. 323, Col. Olivar de los Padres 01780 Mexico D.F. MEXICO TEL: (55) 5668-6699 BARBADOS NICARAGUA A&B Music Supplies LTD 12 Webster Industrial Park Wildey, St.Michael, Barbados TEL: (246)430-1100 Bansbach Instrumentos Musicales Nicaragua Altamira D'Este Calle Principal de la Farmacia 5ta.Avenida 1 Cuadra al Lago.#503 Managua, Nicaragua TEL: (505)277-2557 BRAZIL Roland Brasil Ltda. Rua San Jose, 780 Sala B Parque Industrial San Jose Cotia - Sao Paulo - SP, BRAZIL TEL: (011) 4615 5666 CHILE Comercial Fancy II S.A. Rut.: 96.919.420-1 Nataniel Cox #739, 4th Floor Santiago - Centro, CHILE TEL: (02) 688-9540 COLOMBIA Centro Musical Ltda. Cra 43 B No 25 A 41 Bododega 9 Medellin, Colombia TEL: (574)3812529 COSTA RICA JUAN Bansbach Instrumentos Musicales Ave.1. Calle 11, Apartado 10237, San Jose, COSTA RICA TEL: 258-0211 PANAMA SUPRO MUNDIAL, S.A. Boulevard Andrews, Albrook, Panama City, REP. DE PANAMA TEL: 315-0101 PARAGUAY Distribuidora De Instrumentos Musicales J.E. Olear y ESQ. Manduvira Asuncion PARAGUAY TEL: (595) 21 492147 PERU Audionet Distribuciones Musicales SAC Juan Fanning 530 Miraflores Lima - Peru TEL: (511) 4461388 TRINIDAD AMR Ltd Ground Floor Maritime Plaza Barataria Trinidad W.I. TEL: (868) 638 6385 EUROPE AUSTRIA Roland Elektronische Musikinstrumente HmbH. Austrian Office Eduard-Bodem-Gasse 8, A-6020 Innsbruck, AUSTRIA TEL: (0512) 26 44 260 BELGIUM/FRANCE/ HOLLAND/ LUXEMBOURG Roland Central Europe N.V. Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 CROATIA ART-CENTAR Degenova 3. HR - 10000 Zagreb TEL: (1) 466 8493 CZECH REP. CZECH REPUBLIC DISTRIBUTOR s.r.o Voctárova 247/16 CZ - 180 00 PRAHA 8, CZECH REP. TEL: (2) 830 20270 DENMARK Roland Scandinavia A/S Nordhavnsvej 7, Postbox 880, DK-2100 Copenhagen DENMARK TEL: 3916 6200 FINLAND Roland Scandinavia As, Filial Finland Elannontie 5 FIN-01510 Vantaa, FINLAND TEL: (0)9 68 24 020 GERMANY Roland Elektronische Musikinstrumente HmbH. Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090 GREECE/CYPRUS STOLLAS S.A. Music Sound Light 155, New National Road Patras 26442, GREECE TEL: 2610 435400 HUNGARY Roland East Europe Ltd. Warehouse Area ‘DEPO’ Pf.83 H-2046 Torokbalint, HUNGARY TEL: (23) 511011 IRELAND Roland Ireland G2 Calmount Park, Calmount Avenue, Dublin 12 Republic of IRELAND TEL: (01) 4294444 ITALY Roland Italy S. p. A. Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300 ROMANIA KUWAIT OMAN FBS LINES Piata Libertatii 1, 535500 Gheorgheni, ROMANIA TEL: (266) 364 609 TALENTZ CENTRE L.L.C. Malatan House No.1 Al Noor Street, Ruwi SULTANATE OF OMAN TEL: 2478 3443 RUSSIA MuTek Dorozhnaya ul.3,korp.6 117 545 Moscow, RUSSIA TEL: (095) 981-4967 SLOVAKIA DAN Acoustic s.r.o. Povazská 18. SK - 940 01 Nové Zámky TEL: (035) 6424 330 SPAIN Roland Iberia, S.L. Paseo García Faria, 33-35 08005 Barcelona SPAIN TEL: 93 493 91 00 SWEDEN Roland Scandinavia A/S SWEDISH SALES OFFICE Danvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20 SWITZERLAND Roland (Switzerland) AG Landstrasse 5, Postfach, CH-4452 Itingen, SWITZERLAND TEL: (061) 927-8383 UKRAINE EURHYTHMICS Ltd. P.O.Box: 37-a. Nedecey Str. 30 UA - 89600 Mukachevo, UKRAINE TEL: (03131) 414-40 UNITED KINGDOM Roland (U.K.) Ltd. Atlantic Close, Swansea Enterprise Park, SWANSEA SA7 9FJ, UNITED KINGDOM TEL: (01792) 702701 MIDDLE EAST BAHRAIN Moon Stores No.1231&1249 Rumaytha Building Road 3931, Manama 339 BAHRAIN TEL: 17 813 942 IRAN MOCO INC. No.41 Nike St., Dr.Shariyati Ave., Roberoye Cerahe Mirdamad Tehran, IRAN TEL: (021)-2285-4169 ISRAEL QATAR Al Emadi Co. (Badie Studio & Stores) P.O. Box 62, Doha, QATAR TEL: 4423-554 SAUDI ARABIA aDawliah Universal Electronics APL Behind Pizza Inn Prince Turkey Street aDawliah Building, PO BOX 2154, Alkhobar 31952 SAUDI ARABIA TEL: (03) 8643601 SYRIA Technical Light & Sound Center Rawda, Abdul Qader Jazairi St. Bldg. No. 21, P.O.BOX 13520, Damascus, SYRIA TEL: (011) 223-5384 TURKEY ZUHAL DIS TICARET A.S. Galip Dede Cad. No.37 Beyoglu - Istanbul / TURKEY TEL: (0212) 249 85 10 U.A.E. Zak Electronics & Musical Instruments Co. L.L.C. Zabeel Road, Al Sherooq Bldg., No. 14, Ground Floor, Dubai, U.A.E. TEL: (04) 3360715 NORTH AMERICA CANADA Roland Canada Ltd. (Head Office) 5480 Parkwood Way Richmond B. C., V6V 2M4 CANADA TEL: (604) 270 6626 Roland Canada Ltd. (Toronto Office) 170 Admiral Boulevard Mississauga On L5T 2N6 CANADA TEL: (905) 362 9707 U. S. A. Roland Corporation U.S. 5100 S. Eastern Avenue Los Angeles, CA 90040-2938, U. S. A. TEL: (323) 890 3700 Halilit P. Greenspoon & Sons Ltd. 8 Retzif Ha'alia Hashnia St. Tel-Aviv-Yafo ISRAEL TEL: (03) 6823666 As of Oct. 1, 2007 (ROLAND) AT-800_e.book 291 ページ ２００８年１０月１５日　水曜日　午前９時３７分 For EU Countries For China AT-800_e.book 292 ページ ２００８年１０月１５日　水曜日　午前９時３７分 For EU Countries This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized changes or modification to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit. For Canada NOTICE This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. AVIS Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. For C.A. US (Proposition 65) WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead. For the USA DECLARATION OF CONFORMITY Compliance Information Statement Model Name : Type of Equipment : Responsible Party : Address : Telephone : AT-800 Digital Organ Roland Corporation U.S. 5100 S. Eastern Avenue, Los Angeles, CA 90040-2938 (323) 890-3700