Rosslare 20A302 Proximity Card Reader used for access control User Manual AY Q12 Series Prox Reader I I

Download:
Mirror Download [FCC.gov]
Document ID	239111
Application ID	XrTC38mWCPJFBbl+5/kPyQ==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.19kB (77324 bits)
Date Submitted	2002-04-25 00:00:00
Date Available	2002-04-25 00:00:00
Creation Date	2002-03-26 02:00:39
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-04-25 13:17:38
Document Title	AY-Q12 Series Prox Reader I.I...
Document Creator	Pscript.dll Version 5.0
Document Author:	ilan

Rosslare
03/02
Installation Instructions
Model Series AY-Q12
The AY-Q12 Prox Reader is a weather and
vandal resistant RFID proximity card
reader, to be installed for use with access
control systems.
These Installation Instructions contain the
following information:
* Mounting Instructions
* Wiring Instructions
* Operation Instructions
To mount the Reader, perform the following:
1. Determine an appropriate mounting position for the Reader.
2. Peel off the back of the self-stick mounting label template
included with the unit and place at the desired mounting position.
3. Using the template as a guide, drill two holes (hole size is
indicated on mounting template) for mounting the Reader to the
surface. Drill a 7/16" (10mm) hole for the cable. If mounting on
metal, place a grommet around the edge of the hole.
4. Remove the case screw and slide the rear case away from the front
case. (See diagram below)
5. Drill holes into the back of the rear metal case according to how
you want to mount the reader. (See Diagram below)
6. Attach the reader to the controller.
7. Screw the readers rear case to its mounting location and return the
front case onto the mounted rear case.
8. Secure the front cover by using the supplied security screw in the
controllers accessories kit. An-1L-Shaped tool is provided for use
when tightening the security screw.
1. Prepare the Reader cable by cutting the cable jacket back 11/4
inches and strip the wires 1/2 inch.
2. Prepare the Controller cable by cutting the cable jacket back 11/4
inches and strip the wires 1/2 inch.
3. Splice the Reader pigtail wires to the corresponding Controller
wires and cover each connection (see Figure 2).
4. If the tamper output is being utilized, connect the purple wire to
the correct input on the Controller.
5. Trim and cover all conductors that are not used.
COLOR
Red
Black
White
Green
Brown
Purple
WIEGAND
OUTPUT
DC+Input
Ground
Data 1
Data 0
LED Control
Tamper
Figure 2
Cable Notes:
1. The individual wires coming out of the reader are color coded according
to the recommended Wiegand standard.
2. When using a separate power supply for the Reader, this supply and the
Controller's power supply must have a common ground.
3. The cable shield wire on the Reader should be attached to an Earth
ground (best) or signal ground connection at the panel or power supply
end of the cable. This configuration is best for shielding the Reader
cable from external interference.
SPECIFICATIONS
Power Supply Type
Operating Voltage Range
Linear type recommended
5 - 16 VDC
Maximum Input Current
Standby : 35 mA
Read : 100 mA
Tamper Output
Open collector, active low,
max. sink current is 16 mA
Maximum Cable Distance
to Controller
150 meters (500 ft.)
RF Modulation
ASK
Output Modulation
26-Bit Wiegand
*Card Read Distance:
Regulatory Approvals:
2” (55mm)
USA : UL 294 & FCC Part 15B
Europe : CE Listed
-31oC to 63oC (-25oF to 145oF)
Operating Temp. Range:
0 to 95% (non condensing)
Operating Humidity:
Dimensions:
4.72” (120mm) L x 3” (76mm) W x 1” (27mm) D
Measured using Rosslare Proximity Card (P/N AT-11/14) or
equivalent. Range also depends on electrical environment and/or
proximity to metal.
OPERATION INSTRUCTION
CAUTION!
DO NOT DRILL
This is the Tamper Lens
-1-
The Prox Reader is supplied with an 18-inch pigtail, having a 6conductor cable. To connect the Reader to the Controller, perform
the following steps:
3. After the card data is processed by the Controller, the Controller
can then turn the LED green. Refer to the Controller description
of the LED operation if the Reader LED is controlled by the
Controller.
The Reader should be tested after wiring it to a power supply and the
Controller. Do this by performing the following steps:
1. Power up the Reader. The LED and Beeper will activate three
times. This indicates that the Reader is working properly.
2. Present the appropriate type of proximity card to the Reader. The
LED will momentarily flash green and a short beep will be
emitted. This indicates that the card was read properly by the Prox
Reader..
-2-
0706-0820022-00
4 Screw Custom
There are four indicators
on the back. (Shown
marked as B)
WIRING INSTRUCTION
Figure 2 below shows how you should wire the Reader to the
Controller.
MOUNTING INSTRUCTION
US Gang Box
There are two hole
indicators on the back of
the metal cover
specifically for the US
Gang Box. (Shown
marked as A)
Card Readers are to be used with control panels whose power
supply is UL Listed Class 2 or equivalent.
Suitable for outdoor use
UL File Number: BP9264
-3-
Rosslare
03/02
Installation Instructions
Model Series AY-Q14
The AY-Q14 Prox Reader is a weather and
vandal resistant RFID proximity card
reader, to be installed for use with access
control systems.
These Installation Instructions contain the
following information:
* Mounting Instructions
* Wiring Instructions
* Operation Instructions
To mount the Reader, perform the following:
1. Determine an appropriate mounting position for the Reader.
2. Peel off the back of the self-stick mounting label template
included with the unit and place at the desired mounting position.
3. Using the template as a guide, drill two holes (hole size is
indicated on mounting template) for mounting the Reader to the
surface. Drill a 7/16" (10mm) hole for the cable. If mounting on
metal, place a grommet around the edge of the hole.
4. Remove the case screw and slide the rear case away from the front
case. (See diagram below)
5. Drill holes into the back of the rear metal case according to how
you want to mount the reader. (See Diagram below)
6. Attach the reader to the controller.
7. Screw the readers rear case to its mounting location and return the
front case onto the mounted rear case.
8. Secure the front cover by using the supplied security screw in the
controllers accessories kit. An-1L-Shaped tool is provided for use
when tightening the security screw.
1. Prepare the Reader cable by cutting the cable jacket back 11/4
inches and strip the wires 1/2 inch.
2. Prepare the Controller cable by cutting the cable jacket back 11/4
inches and strip the wires 1/2 inch.
3. Splice the Reader pigtail wires to the corresponding Controller
wires and cover each connection (see Figure 2).
4. If the tamper output is being utilized, connect the purple wire to
the correct input on the Controller.
5. Trim and cover all conductors that are not used.
COLOR
Red
Black
White
Green
Brown
Purple
CLOCK & DATA
OUTPUT
DC+Input
Ground
Clock
Data
LED Control
Tamper
Figure 2
Cable Notes:
1. The individual wires coming out of the reader are color coded according
to the recommended Wiegand standard.
2. When using a separate power supply for the Reader, this supply and the
Controller's power supply must have a common ground.
3. The cable shield wire on the Reader should be attached to an Earth
ground (best) or signal ground connection at the panel or power supply
end of the cable. This configuration is best for shielding the Reader
cable from external interference.
SPECIFICATIONS
Power Supply Type
Operating Voltage Range
Linear type recommended
5 - 16 VDC
Maximum Input Current
Standby : 35 mA
Read : 100 mA
Tamper Output
Open collector, active low,
max. sink current is 16 mA
Maximum Cable Distance
to Controller
150 meters (500 ft.)
RF Modulation
ASK
Output Modulation
Clock and Data
*Card Read Distance:
Regulatory Approvals:
2” (55mm)
USA : UL 294 & FCC Part 15B
Europe : CE Listed
-31oC to 63oC (-25oF to 145oF)
Operating Temp. Range:
0 to 95% (non condensing)
Operating Humidity:
Dimensions:
4.72” (120mm) L x 3” (76mm) W x 1” (27mm) D
Measured using Rosslare Proximity Card (P/N AT-11/14) or
equivalent. Range also depends on electrical environment and/or
proximity to metal.
OPERATION INSTRUCTION
CAUTION!
DO NOT DRILL
This is the Tamper Lens
-1-
The Prox Reader is supplied with an 18-inch pigtail, having a 6conductor cable. To connect the Reader to the Controller, perform
the following steps:
3. After the card data is processed by the Controller, the Controller
can then turn the LED green. Refer to the Controller description
of the LED operation if the Reader LED is controlled by the
Controller.
The Reader should be tested after wiring it to a power supply and the
Controller. Do this by performing the following steps:
1. Power up the Reader. The LED and Beeper will activate three
times. This indicates that the Reader is working properly.
2. Present the appropriate type of proximity card to the Reader. The
LED will momentarily flash green and a short beep will be
emitted. This indicates that the card was read properly by the Prox
Reader..
-2-
0706-0820023-00
4 Screw Custom
There are four indicators
on the back. (Shown
marked as B)
WIRING INSTRUCTION
Figure 2 below shows how you should wire the Reader to the
Controller.
MOUNTING INSTRUCTION
US Gang Box
There are two hole
indicators on the back of
the metal cover
specifically for the US
Gang Box. (Shown
marked as A)
Card Readers are to be used with control panels whose power
supply is UL Listed Class 2 or equivalent.
Suitable for outdoor use
UL File Number: BP9264
-3-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2002:03:26 02:00:39Z
Modify Date                     : 2002:04:25 13:17:38-04:00
Page Count                      : 2
Creation Date                   : 2002:03:26 02:00:39Z
Mod Date                        : 2002:04:25 13:17:38-04:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : ilan
Metadata Date                   : 2002:04:25 13:17:38-04:00
Creator                         : ilan
Title                           : AY-Q12 Series Prox Reader I.I...

EXIF Metadata provided by EXIF.tools