Rosslare 2628SATX Remote Control User Manual

Rosslare Enterprises Ltd Remote Control Users Manual

Users Manual

Rosslare Enterprises Ltd.Copyright Rosslare Enterprises Ltd 1999-2002Product DocumentationCompatibility: The SA-26,27,28 F and FP Wireless 1,2 & 4-Button Remote Controls are compatible with a variety of Rosslare's RF receivers and panels,available in 418.00 MHz. For a list of these products and other information please contact your nearest Rosslare representative.Page 1 of 1 5501-0010054-00MAIN FEATURES:A) Fully compatible with a selection of panels, universal receivers, and RF accessories such as repeaters.B) Excellent RF performance.C) The SA-28 is designed to be attached to the belt using the belt clip attachment, or mounted on a hook with the wall mount attachment.D) Small and smooth enough to fit into your pocket or purse comfortably.E) Microprocessor and SMT Designed electronics for higher quality, andsuperior performance.F) LED indicator visually confirms a good transmission signal.G) Two cells AAA sized replaceable batteries (Model AAA Standard Alkaline Battery) with a long life.H) Over 16 million random RF ID Codes. Multiple SA-26,27 28 units can be programmed to work with a single panel.GENERAL SPECIFICATIONSBattery: Two 1.5 Volt Alkaline Standard BatteryModel AAA. Rosslare recommendsto use the following brands:Energizer, Duracell, Panasonic, VartaSA-26 F&FP: 1 Button (1 Channel) PANIC or IDSA-27 F&FP: 2 Button (2 Channel) ARM / DISARM or IDSA-28 F&FP: 4 Button (4 Channel) ARM / DISARM / PARTIAL ARM / PANIC or IDOperating Temp: -10oC to +50oC (14oF to + 122oF)Operating Humidity: Up to 95% Non- Condensing (max.)RF Frequency: 418.00 MHzInstallation: Indoor Use Only(Not Water Proof)Supervisor: The SA-26,27 & 28 F and FP Remote control transmitters are not supervised.Tamper: There is no case tamper onthe SA-26,27,and 28.Current: Standby: 0 ATransmit: 16 mASize: 104mm x 40mm x 15mm(4.09" x 1.57 " x 0.59 ")Weight: 28 grams Including battery.GENERAL DESCRIPTION:Rosslare has designed the SA-26,27,28 F and FP series to be compliant withthe USA standards UL and FCC. The SA-26,27 and 28 are wireless remotecontrols that have 1,2 and 4 buttons respectively, the F series are designed tofunction in 418.00 MHz with Rosslare’s Popular receivers and controls. (For afull list of available controls please contact your nearest distributor). The FPseries are designed to function with the AY-L24 D Wireless to WeigandReceiver.The SA-26,27,28 F and FP are slim, portable, and except for the number ofbuttons, all three models have the same smooth surface mechanical enclosurewhich comes with a belt-clip and a wall mounting attachment.SA-26,27,28 use state of the art microprocessor design, internal antennadesign, and integrated RF with ASK RF technology, designed andmanufactured under ISO9001 standards. Each model is factory encoded withIndividual ID codes, ensuring that multiple units can be used to provide areliable remote control solution in a single installation.Model : SA-26Model : SA-27Model : SA-28www.rosslare.com.hkFCC NOTE: Transmitter FCC ID : GCD-2628SATXThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help.! Warning !Changes or modifications to this equipment not expressly approved by the party responsible forcompliance (Rosslare Enterprises Ltd.) could void the user's authority to operate the equipment.OPERATING AND INSTALLING:Installing/Replacing the Batteries:>> On the back of the unit, there is a battery door, which can be opened via the latch.>> For a new unit, simply remove the Plastic Tab Insulator to activate the unit.>> To replace the batteries, when the unit is no longer functioning, replace the two primary cells with the recommended AAA batteries.Enrolling the Remote to the Host Control>> Using the control unit’s interface go to the enrolling menu, select the options for the new remote, and transmit to the control unit to enroll. (See Host Instructions)Operation>> Simply pressing one of the buttons will generate the RF transmission to the control unit.>> Local LED indicator visually confirms a good transmission signal.FCC Notice: Transmitter FCC ID : GCD-2628SATXThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference (2)This device must accept any interference received including any interferencethat may cause undersired operation

Navigation menu