Rosslare AYR6255 RGB Proximity Card Reader User Manual AY R6255 Installation and Operation Manual

Download:
Mirror Download [FCC.gov]
Document ID	2970774
Application ID	Js05KJ/D3+XeitgvU0+Ohg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36kB (450015 bits)
Date Submitted	2016-04-26 00:00:00
Date Available	2016-04-26 00:00:00
Creation Date	2015-11-29 10:37:56
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2016-04-09 09:15:46
Document Title	AY-R6255 Installation and Operation Manual
Document Creator	Acrobat PDFMaker 10.0 for Word
Document Author:	Sam Goldberg

AY-R6255
Illuminated RFID Reader
Installation and Operational Manual
Copyright © 2015 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to ROSSLARE
ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’
(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to
use the information.
No part of this manual may be re-produced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written
permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS
AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND
TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION
MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third
party any license to these patents, trademarks, copyrights or other intellectual
property rights, except as expressly provided in any written agreement of
ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time,
without being obliged to announce such revisions or changes beforehand or
after the fact.
Table of Contents
Table of Contents
1.
Introduction ................................................................ 7
2.
Technical Specifications .............................................. 8
3.
Mounting Instructions ................................................ 9
4.
Wiring Instructions ................................................... 10
5.
Operating Instructions .............................................. 12
5.1
Lighting ................................................................................ 12
5.2
DIP Switch Settings for Output and Input Formats ................... 13
6.
Testing the Reader .................................................... 14
A.
Limited Warranty ...................................................... 15
AY-R6255 Installation and Operation Manual
iii
List of Figures
List of Figures
Figure 1: Mounting Template ............................................................................9
iv
AY-R6255 Installation and Operation Manual
List of Tables
List of Tables
Table 1: Wiring Colors .....................................................................................10
Table 2: Operations Table ................................................................................12
Table 3: Output Format ...................................................................................13
Table 4: Read Format.......................................................................................13
AY-R6255 Installation and Operation Manual
Notice and Disclaimer
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product described herein.
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.

The system must not be used for purposes other than those for which it
was designed.

The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.

ROSSLARE exclusive warranty and liability is limited to the warranty and
liability statement provided in an appendix at the end of this document.

This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not all
functions described in this manual may be available in the specific system
and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose
of illustration and reference only.

All data contained herein is subject to change without prior notice.

In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital or
injury).

All graphics in this manual are for reference only, some deviation between
the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).
vi
AY-R6255 Installation and Operation Manual
Introduction
1.
Introduction
The AY-R6255 is 13.56 MHz RFID reader and is installed when using
access control systems. This is a unique product that has a variety of
options to control the reader's illumination according to various
settings. An example of this are the settings that enable users to set
the reader to project green light when everything is normal and red in
case of emergency; this is done by adjusting the inputs accordingly.
This product is compatible with any Rosslare controller that supports
Wiegand 26-Bit, Wiegand 32-Bit, Wiegand 34-Bit, or Wiegand 40-Bit
protocols, as well with any third-party controllers that support the
same Wiegand inputs.
The panel links are used to set various conditions between events and
outputs to get the required illumination from the reader.
AY-R6255 Installation and Operation Manual
Technical Specifications
2.
Technical Specifications
Electrical Characteristics
Power Supply Type
Linear (recommended)
Operating Voltage Range
12–16 VDC
Maximum Input Current
Standby: 100 mA
Read: 250 mA
Tamper Output
Open collector, active low, max. sink
current 16 mA
Read Range* (max)
MIFARE Classic EV1®: 7 cm (2.8 in.)
Felica/MIFARE Plus®/DESFire®: 3 cm
(1.2 in.)
ISO1443B: 5 cm (2.0 in.)
China ID: 2 cm (0.8 in.)
Maximum Cable Distance to
Controller
150 m (500 ft)
RE Modulation
ASK @ 13.56 MHz
Output Format
Wiegand 26-Bit, Wiegand 32-Bit,
Wiegand 34-Bit, Wiegand 40-Bit
Environmental Characteristics
Operating Temp. Range
-31°C to 63°C (-25°F to 145°F)
Operating Humidity Range
0 to 95% (non-condensing)
Physical Characteristics
Height x Width x Depth
120 x 89 x 21 mm
(4.7 x 3.5 x 0.8 in.)
Weight
202 g (7.1 oz)
* Measured using a Rosslare proximity card or equivalent. Range also depends
on electrical environment and proximity to metal.
AY-R6255 Installation and Operation Manual
Mounting Instructions
3.
Mounting Instructions
Installation of an RFID reader adjacent to metallic surfaces
might alter the reader’s specifications. To diminish this
interference, use a plastic spacer when mounting the reader.
When mounting the reader, you must remove the snap-off cover to
access the screw holes.
To mount the reader:
1. Determine an appropriate mounting position for the reader.
2. Screw off the back of the unit and place it at the desired
mounting position.
3. Using the template as a guide, drill two holes (hole size is
indicated on mounting template) for mounting the reader to the
surface (Figure 1).
Figure 1: Mounting Template
4. Drill a 10-mm (7/16”) hole for the cable.
5. Route the interface cable from the reader to the controller.
The proximity reader is also mountable using strong epoxy glue.
After application, firmly hold the reader in place until the glue
dries
AY-R6255 Installation and Operation Manual
Wiring Instructions
4.
Wiring Instructions
The AY-R6255 is supplied with a 10-wire 45-cm (18”) pigtail,
comprising a 6-conductor cable.
To connect the reader to the controller:
1. Prepare the reader cable by cutting its jacket back 4.5 cm (1¼”)
and strip the wires 1.3 cm (½”).
2. Prepare the controller cable by cutting its jacket back 3.2 cm
(1¼”) and stripping the wires 1.3 cm (½”).
3. Splice the reader’s pigtail wires to the corresponding controller
wires and cover each connection.
Table 1: Wiring Colors
Color
Wiring
Black
Ground
Red
Vin
Green
Data 0
White
Data 1
Brown
G.LED
Purple
Tamper
Yellow
SET 0
Blue
SET 1
Gray
SET 2
Orange
SET 3
If the tamper output is being utilized, connect the purple wire to
the correct input on the controller.
10
AY-R6255 Installation and Operation Manual
Wiring Instructions
4. Trim and cover all unused conductors.
•
The individual wires from the reader are color-coded according the
Wiegand standard.
•
When using a separate power supply for the reader, this supply and
that of the controller, must have a common ground.
•
The reader’s cable shield wire should preferably be attached to an
earth ground, or a signal ground connection at the panel, or power
supply end of he cable. This configuration is best fro shielding the
Reader cable from external interference
AY-R6255 Installation and Operation Manual
11
Operating Instructions
5.
Operating Instructions
5.1
Lighting
Table 2 shows the settings for Set 0 through Set 3, which determine
the color of the unit’s lighting.
Table 2: Operations Table
Operation
Set 0
Set 1 Set 2
Set 3
Green
Green with dimming
Red
Red with dimming
Blue
Blue with dimming
Purple
Purple with dimming
Yellow
Yellow with dimming
Cyan/Aqua
Cyan/Aqua with dimming
White
White with dimming
No Illumination
7 colors circularly with dimmer
1 – Not connected; 0 – Connected to the ground
12
AY-R6255 Installation and Operation Manual
Operating Instructions
5.2
DIP Switch Settings for Output and Input
Formats
Setting the DIP Switches of Pins 1 and 2 determine the output format
of the reader (Table 3), while Pins 3 and 4 determine the card format
that is read (Table 4).
Pins 5 through 8 are for future use.
Table 3: Output Format
Pin 1
Pin 2
Output
Wiegand 26-Bit
Wiegand 32-Bit
Wiegand 34-Bit
Wiegand 40-Bit
Table 4: Read Format
Pin 3
Pin 4
Read
ISO14443A
ISO14444B
ISO15693.Felica.Topaz
China ID/ ISO14443A
AY-R6255 Installation and Operation Manual
13
Testing the Reader
6.
Testing the Reader
Once the reader has been wired to a power supply and the controller,
it should be tested.
To test the reader:
1. Power up the reader. The beeper activates 3 times after which the
LED lights up green (according to Set 0, Set 1, Set 2, and Set 3
setup). This indicates that the reader is working properly.
The default is that the reader switches colors circularly. The color
can be set according to the input wires.
2. Present the appropriate type of proximity card to the reader. The
LED turns green (if set to default) and a short beep is emitted,
indicating that the card was read properly by to proximity reader.
14
AY-R6255 Installation and Operation Manual
Limited Warranty
A.
Limited Warranty
The full ROSSLARE Limited Warranty Statement is available in the
Quick Links section on the ROSSLARE website at
www.rosslaresecurity.com.
Rosslare considers any use of this product as agreement to the
Warranty Terms even if you do not review them.
AY-R6255 Installation and Operation Manual
15
Caution:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or change to this equipment. Such modifications or change could void the user’s
authority to operate the equipment.
This radio transmitter (identify the device by certification number or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain indicated. Antenna types not included in this list, having a gain greater
than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.
AY-R6255
Asia Pacific, Middle
East, Africa
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel:
+852-2795-5630
Fax: +852-2795-1508
support.apac@rosslaresecurity.com
United States and
Canada
Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: +1-866-632-1101
Local:
+1-817-305-0006
Fax:
+1-817-305-0069
support.na@rosslaresecurity.com
Europe
Latin America
Rosslare Latin America
Buenos Aires, Argentina
Tel: +54-11-4001-3104
support.la@rosslaresecurity.com
China
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel:
+86-755-8610 6842
Fax: +86-755-8610 6101
support.cn@rosslaresecurity.com
India
Rosslare Electronics India Pvt Ltd.
Tel/Fax: +91-20-40147830
Mobile: +91-9975768824
sales.in@rosslaresecurity.com
0706-0960607+00
Rosslare Israel Ltd.
Rosh HaAyin, Israel
Tel:
+972-3-938-6838
Fax: +972-3-938-6830
support.eu@rosslaresecurity.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2016:04:09 09:15:46+08:00
Create Date                     : 2015:11:29 10:37:56+02:00
Metadata Date                   : 2016:04:09 09:15:46+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 for Word
Document ID                     : uuid:47ad4f81-b112-4f2b-9c06-2021b2ec4569
Instance ID                     : uuid:0d63ea6e-00bc-4b5d-8056-61f3fdd086ed
Subject                         : 26
Format                          : application/pdf
Title                           : AY-R6255 Installation and Operation Manual
Creator                         : Sam Goldberg
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20151129083750
Company                         : SYO
Page Count                      : 17
Page Layout                     : OneColumn
Author                          : Sam Goldberg

EXIF Metadata provided by EXIF.tools