Ruby Tech Es 2310C Users Manual L2 Managed Switch Solutions ¦±

ES-2310C to the manual c01aa1fa-855e-4310-9949-ed656e294d88

: Ruby-Tech Ruby-Tech-Es-2310C-Users-Manual-525586 ruby-tech-es-2310c-users-manual-525586 ruby-tech pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

RUB TECH

R

Networking & Communications

Fast EthernetSwitch
L2 Managed Switch

Fast Ethernet Switch

ES-2310C
ES-2310C:
8-Port L2 Managed Fast Ethernet Switch with 2 SFP Gigabit Dual Media
Key Features
Standard compliance
---IEEE 802.3 10Base-T
---IEEE 802.3u 100Base-TX
---IEEE 802.3ab 1000Base-TX
---IEEE 802.3z 1000Base-X Ethernet
---IEEE 802.3x flow control capability
---ANSI/IEEE 802.3 auto-negotiation
---IEEE 802.1q VLAN
RoHS Compliance
Subscriber Interface
---8 are 10/100Mbps and 2 Gigabit
Ethernet ports.
---Port 9,10 are Gigabit TP/SFP Fiber
auto sense
---Auto-Negotiation and Auto-MDIX
---Back pressure flow control for half
duplex.
---IEEE 802.3x compliant for full duplex
---Connector: 8 RJ-45 and 2 dual media,
RJ-45/SFP
Performance
Switching capacity:
---Non-blocking switch fabric supports up
to 8 FE+2GbE ports
---8 K MAC addresses
---256K packet buffer and 128K control
memory
VSM(Virtual Stacking Management)
---Supports 16 devices stacking
---Multiple switches can be managed via
one IP address, just like software
stacking
---Low cost and easily to establish
network environment, not extra
hardware require
---Not center on the physical location of
wiring closets
VLAN
---Supports SVL/IVL configuration to
meet your VLAN requirement
---Port-base VLAN
---IEEE802.1q tag-base VLAN, 4094
max, up to 256 active VLANs including
static plus dynamic entry
---IEEE802.1q tag-base VLAN

Benefits
QoS with four priority queues
The QoS(Quality Of Service) feature provides four internal queues to support
four different classifications of traffic. High priority packet streams experience
less delay inside the switch, which supports lower latency for certain delaysensitive traffic. The ES-2310C can classify the packet as one of the four
priorities according to vip port, 802.1p priority tag, DiffServ and/or IP TOS.
The QoS operate at full wire speed. The actual scheduling at each egress
port can be based upon a strict priority, weighted round robin or a mix of both.
Port Mirroring
This mechanism helps track network errors or abnormal packet transmission
without interrupting the flow of data. Allow ingress traffic to be monitored by a
single port that is defined as mirror capture port. The mirror capture port can
be any 10/100 port, 10/100/1000 port. Mirroring multiple ports is possible but
can create congestion at the mirror capture port.
Q-in-Q VLAN for performance & security
The VLAN feature in the switch offers the benefits of both security and
performance. VLAN is used to isolate traffic between different users and thus
provides better security. Limiting the broadcast traffic to within the same VLAN
broadcast domain also enhances performance. Q-in-Q, the use of double
VLAN tags is an efficient method for enabling Subscriber Aggregation. This is
very useful in the MAN.
Isolated Group, provides protection for certain ports
The isolated group feature allows certain ports to be designated as protected.
All other ports are non-isolated. Traffic between isolated group members is
blocked. Traffic can only be sent from isolated group to non-isolated group.
Mac-based 802.ad LACP with automatic link fail-over
Dynamic fail-over means packets will not get assigned to any trunk member
port that has failed. If one of the ports were to fail, traffic will automatically get
distributed to the remaining active ports.
802.1x Access Control improves network security
802.1x features enable user authentication for each network access attempt.
Port security features allow you to limit the number of MAC addresses per
port in order to control the number of stations for each port. Static MAC
addresses can be defined for each port to ensure only registered machines
are allowed to access. By enabling both of these features, you can establish
an access mechanism based on user and machine identities, as well as
control the number of access stations.
802.1d Compatible & 802.1w Rapid Spanning Tree
For mission critical environments with multiple switches supporting STP, you
can configure the switches with a redundant backup bridge path, so
transmission and reception of packets can be guaranteed in event of any
fail-over switch on the network.
2 dual media ports for flexible fiber connection
Port 9, 10 dual media ports are provided for flexible fiber connection. You can
select to install optional transceiver modules in these slots for short, medium

RUB TECH

R

Networking & Communications

Fast EthernetSwitch
L2 Managed Switch

Fast Ethernet Switch

---Flooding unknown VLAN frame setting,
can flood packet with some VLAN tag
associated to a invalid/inactive VLAN
---In tag-base VLAN, supports egress/
ingress packet filter
---Q-in-Q is an efficient method for
enabling Subscriber Aggregation
Qos
---Port Based (VIP Port), 802.1p , TOS
and Diffserv(IPv4/IPv6) based QoS
packet classification
---Supports four level priority queues to
prioritize in-bound and out-bound traffic
---Supports two scheduling, WRR and
Strict
---Supports priority in a Q-in-Q tag
Bandwidth Control
---Supports bandwidth rating per port
ingress and egress rate limit 1000Mbps
with 1Mbps increment
Broadcast Storm
---Multicast/Broadcast/Unknown-Unicast
Storm suppression.
Transmission Mode
---10/100Mbps support full or half duplex
1000Mbps support full duplex only
Transmission Speed
---10/100/1000Mbps for TP 1000Mbps
for Fiber
Port Mirroring
---Support 1: N RX port mirroring
---Supports port sniffer function with 3
modes:
(TX Monitor Mode, RX Monitor Mode
and TX-RX pair Monitor Mode)
Isolated Group
---Provide one group allows certain ports
to be designated as protected
Restricted Group
---Can decide the direction of transmitting
packets for the specific port
Protocol
LACP
---2 Fast Ethernet +1 Gigabit Ethernet
groups
---Per-group max 4 member
---Provides DA, SA and DA+SA Macbased trunking with automatic link
fail-over
GVRP/GARP
---1.802.1q with GVRP/ GARP
Multicasting
---Supports IGMP snooping including
active and passive mode
STP/RSTP
---802.1d/1w
Network Security
---802.1x access control
---Isolated group
---Restricted group
---Management Access Policy Control

or long distance fiber backbone attachment. Use of the SFP/GBIC will disable
their corresponding built-in 10/100/1000Base-T connections.
Broadcast/Multicast/unknown-unicast Storm Control
To limit too many broadcast/multicast/unknown-unicast flooding in the
network, broadcast/multicast storm control is used to restrict excess traffic.
Threshold values are available to control the rate limit for each port. Packets
are discarded if the count exceeds the configured upper threshold.

Technical Specifications
LED Description
LED
Color
Global POWER
Green
Global CPU
Green
Port
LINK/ACT Green
1-8

Function
-Lit when +5V power is coming up
-Blinks when CPU is active
-Lit when connection with remote device
is good
-Blinks when any traffic is present
10/100/
Green
-Lit Green when TP link on 1000Mbps
1000Mbps /Amber
speed
-Lit Amber when TP link on 100Mbps
speed
-Off when 10Mbps or no link occurs
SFP
Green
- Lit when SFP/GBIC connection with
remote device is good
-Blinks when any traffic is present

Port
1-8

Port
9,10

Network Interface
Category Connector
10-T/
100-TX
1000-T
1000-SX
(M-M)
1000-SX
(S-M)

Transmission

RJ-45

Max. Cable
Length
Full/Half Duplex
100M

RJ-45
LC

Full Duplex
Full Duplex

LC

Full Duplex

100M
220M
50/125
10KM
9/125

Wavelength
/
/
850nm
1310nm

Full Forwarding Packet Rate: PPS (64 Bytes packets per second)

Forwarding Rate
14,880PPS
148,800PPS
1,488,000PPS

Speed
10Mbps
100Mbps
1000Mbps

Cable and Maximum Length
Feature
TP
1000Base-SX SC M-M

Detailed Description
Cat. 5 UTP cable, up to 100m
Up to 220/275/500/550m,
which depends on Multi-Mode Fiber type
1000Base-LX SC S-M
Single-Mode Fiber, up to10/30/50Km
1000Base-FX WDM SC S-M Single Fiber, BiDi 10Km
Hardware Spec
Feature

Detailed Description

Voltage

100~240 VAC

Frequency

50~60 Hz

Consumption

11.6W

Ambient Temperature

0 to 40 C

Humidity

5% to 90%

Dimensions

44(H) x 220(W) x 130.5(D) mm

Safety

Comply with FCC Part 15 Class A & CE
Mark Approval

RUB TECH

R

Networking & Communications

Fast EthernetSwitch
L2 Managed Switch

Fast Ethernet Switch

---Static mac, to limit which mac
addresses can pass through or not
---Mac addresses learning limit, to set up
the maximum amount of mac that
each port can learn
Snmpv1,v2c Network Management
RFC 1213 MIB (MIB-II)
Interface MIB
Address Translation MIB
IP MIB
ICMP MIB
TCP MIB
UDP MIB
SNMP MIB
RFC 1757 RMON MIB
Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
Enterprise MIB

Overview
ES-2310C is a Managed Fast Ethernet
switch that supports SNMP, Web UI and
CLI management interface and with 8 10/
100Base-TX (RJ-45 connectors) and 2
Gigabit dual media (RJ-45/SFP or RJ-45/
GBIC) ports. It is a standard switch that
meets all IEEE 802.3/u/x/z Gigabit, Fast
Ethernet specifications. In addition, the
switch implements the QoS (Quality of
Service), VLAN, Mac Filtering Policy, Port
Mirror, VLAN and full L2 protocols. It has
a rich feature set suitable for streaming
VoIP, video, and data traffics for multimedia
applications.
In this switch, Port 9, 10 support two types
of media --- TP and SFP/GBIC Fiber (LC,
BiDi-SC....); both ports support 10/100/
1000Mbps TP or 1000Mbps SFP/GBIC
Fiber with auto-detected function.
1000Mbps SFP/GBIC Fiber transceiver
is used for high-speed connection
expansion.

Ordering Information
ES-2310C:
8-Port L2 Managed Fast Ethernet Switch with 2 SFP Gigabit Dual Media
Optional SFP Fiber Module (See note below)
SFP.LC
SFP.LC.M2
SFP.LC.S10
SFP.LC.S30
SFP.L5.S50
SFP.BL5.S10
SFP.BL3.S10
SFP.BL5.S20
SFP.BL3.S20

1000Base-SX GE SFP Multi-Mode Fiber Module 850nm
1000Base-SX GE SFP Fiber Module, LC Multi-Mode
1310nm 2km
1000Base-LX GE SFP Single-Mode 10Km Fiber Module
1310nm
1000Base-LX GE SFP Single-Mode 30Km Fiber Module
1310nm
1000Base-LX GE SFP Single-Mode 50Km Fiber Module
1550nm
1000Base-LX GE SFP BiDi_LC 10Km Module Single
Fiber 1550nm, Type 1
1000Base-LX GE SFP BiDi_LC 10Km Module Single
Fiber 1310nm, Type 2
1000Base-LX GE SFP BiDi_LC 20Km Module Single
Fiber 1550nm, Type 1
1000Base-LX GE SFP BiDi_LC 20Km Module Single
Fiber 1310nm, Type 2

Note:
We recommend the SFP transceiver from the following vendors:
1. Ruby Tech Corporation
2. Agilient Technologies
3. AVAGO Technologies
4. Finisar Corporation

Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan
TEL:886-2-2785-3961 FAX:886-2-2786-3012

http://www.rubytech.com.tw
E-mail rubytech@mail.rubytech.com.tw

Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
2008-07.30 Version A



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2008:07:29 11:17:04Z
Creator Tool                    : CorelDRAW Version 9.397
Modify Date                     : 2008:07:29 11:18:12+08:00
Metadata Date                   : 2008:07:29 11:18:12+08:00
Format                          : application/pdf
Creator                         : vivian
Title                           : (1)L2 Managed Switch Solutions-¦±
Producer                        : Corel PDF Engine Version 9.397
Document ID                     : uuid:8b16934a-a8a9-4a2d-86be-152a45d0bb80
Instance ID                     : uuid:cf46445b-a325-4b68-ab70-cd9f3937ddc6
Page Count                      : 3
Author                          : vivian

EXIF Metadata provided by EXIF.tools