Ruckus Wireless H500 H500 Access Point User Manual H500 Quick Setup Guide DRAFT

Ruckus Wireless, Inc. H500 Access Point H500 Quick Setup Guide DRAFT

Users Manual

Copyright © 2014 Ruckus Wireless, Inc. Page 1 of 4Draft Published 11 December 2014, Part Number 800-70718-001 Rev AH500 Access PointQuick Setup GuideThis Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless H500 Dual Band 802.11ac Multimedia Wi-Fi Access Point Wall Switch. After completing the steps described in this Guide, you will be able to access the Wi-Fi Wall Switch and begin providing wired and wireless network access to users. The rest of this document refers to the H500 Access Point Wall Switch as the H500.The H500 has many options: • It can be mounted on a standard USA- or EU-style single-gang wall outlet box.• It can be powered by a customer-supplied IEEE 802.3af/at-compliant PoE switch or injector, or can be powered by an optional customer-ordered DC power adapter.• It has side cutouts for one or two Ethernet bypass cables. The mounting bracket has locating hooks to keep the bypass cables aligned with the cutouts when attaching the H500 to the mounting base.• It can have a low-power (0.5W or less) customer-supplied USB adapter plugged in. The USB adapter is very difficult to remove after the H500 is attached to the mounting base.ABOUT POWERING PERIPHERAL DEVICESThe H500 can supply power to USB and PoE-powered devices, and the power supplied depends on the PoE power supplied to the H500.• The USB port is intended for low-power devices such as BLE beacons. The maximum power that the USB port can supply is 0.5W. • The PoE port is intended for PoE-powered peripheral devices such as IP telephones.THIS GUIDE IN OTHER LANGUAGES•请从以下网站获得该指南的简体中文版 https://support.ruckuswireless.com.• Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com.•こ の ガ イ ド の日本語版は https://support.ruckuswireless.com でご覧く ださい。•이 가이드의 한국어 버전은 웹 사이트(https://support.ruckuswireless.com)에서 확인하시기 바랍니다.• Veja a versão em português (Brasil) deste guia em https://support.ruckuswireless.com.• Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.com.BEFORE YOU BEGINBefore deploying Ruckus Wireless products, please check for the latest software and the release documentation.• User Guides and Release Notes are available at http://support.ruckuswireless.com/documents.• Software Upgrades are available athttp://support.ruckuswireless.com/software.• Open Source information is available athttp://opensource.ruckuswireless.com.• Software License and Limited Warranty are available at http://support.ruckuswireless.com/warranty.PACKAGE CONTENTS• H500 Access Point Wall Switch• Mounting bracket• Two 10mm M3x0.5 thread Torx flat head machine screws• Two 1” 6-32 thread Phillips pan head machine screws• Product warranty statement• Registration card• Regulatory flyer• Declaration of Conformity, if required•This Quick Setup GuideNote: The H500 requires Ruckus Wireless base image 100.0.1 firmware or later. Managed H500 deployments require RuckOS for SmartCell Gateway (SCG) 3.1 or later, RuckOS for virtual SmartCell Gateway (vSCG) 3.0 or later, or ZoneFlex (ZF) 9.10 or later.H500 Power Options and Available Power Out for PoE Out and USBH500 Power Source Power Available for PoE Out and USB802.3af PoE 5W total802.3at PoE 12.95W PoE Out (802.3af Class 3) and 0.5W USBDC power adapter (sold separately)12.95W PoE Out (802.3af Class 3) and 0.5W USB
Copyright © 2014 Ruckus Wireless, Inc. Page 2 of 4Draft Published 11 December 2014, Part Number 800-70718-001 Rev ASTEP 1: COLLECT TOOLS AND SETUP REQUIREMENTS• No. 2 Phillips screwdriver and T10 Torx driver for the mounting bracket screws• A standard USA- or EU-style single-gang wall outlet box• One of the following:• Customer-supplied IEEE 802.3af/at-compliant PoE switch and customer-supplied Ethernet cable• Customer-supplied IEEE 802.3af/at-compliant PoE injector and customer-supplied Ethernet cable• Customer-ordered DC power adapter (Ruckus part number 902-0170-XX10, sold separately)• An Ethernet cable with or without PoE run through the wall from your LAN through the wall outlet box• (optional) One or two separate Ethernet bypass cables run through the outlet box• A computer with an Ethernet port and a wireless card• One Cat 5e or better Ethernet cableSTEP 2: CONNECT THE COMPUTER TO THE H500Figure 1: Top view1After removing your H500 from its package, place it next to your computer.2Using an Ethernet cable, connect your computer’s network port to the PoE In port on the back of the H500. 3Using an AC adapter (sold separately), connect the H500 12VDC port to a protected power source. Alternatively, connect the PoE port to a PoE injector or switch for both power and network connections.4Verify that the Power LED on the external enclosure is a steady green.Figure 2: Back viewSTEP 3: PREPARE YOUR COMPUTER FOR H500 SETUP1On your Windows 7 computer, configure your network adapter from the Local Area Connection settings as follows:• Start > Control Panel > Network and Sharing Center > Change Adapter Settings2Edit the TCP/IPv4 address settings as follows: • Local Area Connection > Properties > Internet Protocol Version 4 (TCP/IPv4) > PropertiesThe TCP/IPv4 Properties dialog box appears.3Select Use the following IP address (if it is not already selected) and then make the following entries:•IP address: 192.168.0.22 (or any address in the 192.168.0.x network, except 192.168.0.1)•Subnet mask: 255.255.255.0•Default gateway: 192.168.0.1Leave the DNS server fields empty.4Click OK to save your changes.Your changes are put into effect immediately. PoE In Port12VDC PortNote: The following procedures assume Windows 7 as the operating system. Procedures for other OS’s are similar.Important! Write down all of the currently active settings so you can restore your computer to its current configuration later (when this process is complete).
Copyright © 2014 Ruckus Wireless, Inc. Page 3 of 4Draft Published 11 December 2014, Part Number 800-70718-001 Rev ASTEP 4: LOG INTO THE H500 ACCESS POINTAs specified in Step 3: Prepare Your Computer for H500 Setup, the H500 should be directly connected to your computer (through the PoE In Ethernet port on the back of the H500) and powered on, ready for setup.1On your computer, open a Web browser window.2In the browser, type this URL to connect to the H500: https://192.168.0.13Press <Enter> to initiate the connection. When a security alert dialog box appears, click OK/Yes to proceed.4When the Ruckus Wireless Admin login page appears, enter the following: •Username: super•Password: sp-admin5Click Login.STEP 5: CUSTOMIZE THE WIRELESS SETTINGS1On the Web interface menu, click Configuration > Radio 2.4G or Configuration > Radio 5G. The Configure > Wireless > Common page appears. 2Verify that the following options are active:•Channel: SmartSelect.•Country Code: If you are not located in the United States of America, select your current country.3Click Update Settings if you made any changes.4Click any of the “Wireless #” (Wireless LAN Number) tabs at the top of the page. 5In Wireless Availability, click Enabled.6Delete the text in the SSID field, then type a name for your net-work that will help your users identify the H500 access point in their wireless network connection applications.7Click Update Settings to save your changes.8Repeat Steps 4-7 for each Wireless # (Wireless LAN Number) interface that you want to enable. 9Click Logout to exit the Web interface.10 When the Ruckus Wireless Admin login page reappears, you can exit your browser.11 Disconnect the computer from the H500 and from the power source, and then restore your computer to its original network connection configuration. Continue with Step 6: Mounting Bracket on an Outlet Box.STEP 6: Mounting Bracket on an Outlet BoxFigure 3: Mounting bracket1Use either the original wall outlet box screws or the factory-supplied 1” Phillips pan head machine screws to attach the H500 mounting bracket to a single-gang wall outlet box.2Pull the uplink Ethernet cable for the H500 from the LAN through the wall outlet box.3When you are powering the H500 with a customer-ordered DC power adapter, pull the power cable from the adapter through the wall outlet box.4When you have extra Ethernet cables (usually one or two) that are to bypass the H500, pull them through the wall outlet box.Drape the bypass Ethernet cables across one or both of the upper hooks on the mounting bracket.Continue with Step 7: Attaching the H500 to the Mounting Bracket.Default H500 Access Point Settings (for your reference)Network Names (SSIDs) Wireless1-Wireless8 (2.4GHz radio)Wireless9-Wireless16 (5GHz radio)Security (Encryption method) Disabled for each wireless interfaceDefault Management IP Address192.168.0.1Optional: In a default H500 configuration, the H500 uses a DHCP-assigned IP address. If you anticipate logging into the H500 regularly to perform monitoring or maintenance once it is in place, then you may want to consider switching from DHCP and instead assigning a static IP address to the H500.A. On the menu, click Configuration > Internet. B. Click the Static IP option.C. Fill in the IP Address and Mask fields.D. Click Update Settings to save your changes.Note: The H500 mounting bracket has four hooks that face UP. Make sure that the hooks are facing up when attaching the mounting bracket to the wall outlet box.
Copyright © 2014 Ruckus Wireless, Inc. Page 4 of 4Draft Published 11 December 2014, Part Number 800-70718-001 Rev ASTEP 7: ATTACHING THE H500 TO THE MOUNTING BRACKET1Make sure that the mounting bracket is securely fastened as described in Step 6: Mounting Bracket on an Outlet Box.2If you have bypass Ethernet cables (usually one or two, if any), then make sure that they are draped across one or both of the two upper hooks on the mounting bracket.Figure 4: Attaching the H500 to the Mounting Bracket3If you are installing a customer-supplied USB adapter, then plug it securely into the USB jack on the bottom of the H500.4Pull the uplink Ethernet cable from your LAN through the outlet box, and plug it into the back of the H500.5The mounting bracket has two lower hooks that fit into slots on the bottom of the H500. Rest the bottom of the H500 on those hooks, and then tilt the H500 until it is up against the mounting bracket.Note that any optional bypass Ethernet cable(s) should slide smoothly into the slots on the sides of the H500.6Use a T10 Torx driver to screw the factory-supplied Torx flat head machine screws through the H500 screw holes into the threaded inserts on the sides of the mounting bracket. 7After the H500 has powered on, it supplies USB power and PoE Out as described in About Powering Peripheral Devices.Continue with Step 8: Testing the H500 Operation.STEP 8: TESTING THE H500 OPERATIONAfter a short pause to re-establish the Internet connection, you can test the H500. 1Using any wireless-enabled computer or mobile device, search for and select the wireless network you previously con-figured. 2If you can connect, open a browser and navigate to any public Web site.3Using any wired computer or other device and an Ethernet cable, plug into an Ethernet port on the bottom of the H500. 4Open a browser and navigate to any public Web site.5Repeat Step 3 and Step 4 for the rest of the Ethernet ports on the bottom of the H500.6Verify that all connected PoE-powered devices and USB adapters are working correctly.Congratulations! Your H500 is active and ready for use. To be determined.

Navigation menu