Ruckus Wireless H500 H500 Access Point User Manual H500 Quick Setup Guide DRAFT

Download:
Mirror Download [FCC.gov]
Document ID	2528258
Application ID	kQR6dtRew6mGSvGtIkOSWw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.7kB (258688 bits)
Date Submitted	2015-02-09 00:00:00
Date Available	2015-02-09 00:00:00
Creation Date	2007-02-21 14:03:02
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2014-12-11 01:55:50
Document Title	H500 Quick Setup Guide DRAFT
Document Creator	FrameMaker 11.0.2
Document Author:	Ruckus Wireless, Inc.

ABOUT POWERING PERIPHERAL DEVICES
BEFORE YOU BEGIN
The H500 can supply power to USB and PoE-powered devices,
and the power supplied depends on the PoE power supplied to
the H500.
Before deploying Ruckus Wireless products, please check for the
latest software and the release documentation.
•
H500 Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions on how
to set up your Ruckus Wireless H500 Dual Band 802.11ac
Multimedia Wi-Fi Access Point Wall Switch. After completing the
steps described in this Guide, you will be able to access the Wi-Fi
Wall Switch and begin providing wired and wireless network
access to users. The rest of this document refers to the H500
Access Point Wall Switch as the H500.
•
•
The USB port is intended for low-power devices such as BLE
beacons. The maximum power that the USB port can supply
is 0.5W.
User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents.
•
Software Upgrades are available at
http://support.ruckuswireless.com/software.
The PoE port is intended for PoE-powered peripheral devices
such as IP telephones.
•
Open Source information is available at
http://opensource.ruckuswireless.com.
•
Software License and Limited Warranty are available at
http://support.ruckuswireless.com/warranty.
H500 Power Options and Available Power Out for PoE Out
and USB
H500 Power Source
Power Available for PoE Out
and USB
PACKAGE CONTENTS
802.3af PoE
5W total
•
Mounting bracket
•
Two 10mm M3x0.5 thread Torx flat head machine screws
•
Two 1” 6-32 thread Phillips pan head machine screws
802.3at PoE
The H500 has many options:
•
It can be mounted on a standard USA- or EU-style singlegang wall outlet box.
•
It can be powered by a customer-supplied IEEE 802.3af/atcompliant PoE switch or injector, or can be powered by an
optional customer-ordered DC power adapter.
•
•
It has side cutouts for one or two Ethernet bypass cables. The
mounting bracket has locating hooks to keep the bypass
cables aligned with the cutouts when attaching the H500 to
the mounting base.
It can have a low-power (0.5W or less) customer-supplied
USB adapter plugged in. The USB adapter is very difficult to
remove after the H500 is attached to the mounting base.
Note: The H500 requires Ruckus Wireless base image 100.0.1
firmware or later. Managed H500 deployments require RuckOS
for SmartCell Gateway (SCG) 3.1 or later, RuckOS for virtual
SmartCell Gateway (vSCG) 3.0 or later, or ZoneFlex (ZF) 9.10 or
later.
Copyright © 2014 Ruckus Wireless, Inc.
Draft Published 11 December 2014, Part Number 800-70718-001 Rev A
DC power adapter (sold
separately)
12.95W PoE Out (802.3af
Class 3) and
0.5W USB
12.95W PoE Out (802.3af
Class 3) and
0.5W USB
•
H500 Access Point Wall Switch
•
Product warranty statement
•
Registration card
•
Regulatory flyer
•
Declaration of Conformity, if required
•
This Quick Setup Guide
THIS GUIDE IN OTHER LANGUAGES
•
请从以下网站获得该指南的简体中文版
https://support.ruckuswireless.com.
•
Vous trouverez la version française de ce guide à l'adresse
suivante https://support.ruckuswireless.com.
•
こ の ガ イ ド の日本語版は https://support.ruckuswireless.com
で ご 覧 く だ さ い。
•
이 가이드의 한국어 버전은 웹 사이트
(https://support.ruckuswireless.com) 에서 확인하시기 바랍니
다.
•
Veja a versão em português (Brasil) deste guia em
https://support.ruckuswireless.com.
•
Puede ver la versión en español (América Latina) de esta guía
en https://support.ruckuswireless.com.
Page 1 of 4
STEP 1: COLLECT TOOLS AND SETUP
REQUIREMENTS
•
No. 2 Phillips screwdriver and T10 Torx driver for the mounting
bracket screws
•
A standard USA- or EU-style single-gang wall outlet box
•
One of the following:
•
Customer-supplied IEEE 802.3af/at-compliant PoE switch
and customer-supplied Ethernet cable
•
Customer-supplied IEEE 802.3af/at-compliant PoE
injector and customer-supplied Ethernet cable
•
Customer-ordered DC power adapter (Ruckus part
number 902-0170-XX10, sold separately)
STEP 2: CONNECT THE COMPUTER TO THE H500
Figure 1: Top view
STEP 3: PREPARE YOUR COMPUTER FOR H500
SETUP
Note: The following procedures assume Windows 7 as the
operating system. Procedures for other OS’s are similar.
On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as follows:
•
Edit the TCP/IPv4 address settings as follows:
•
•
An Ethernet cable with or without PoE run through the wall
from your LAN through the wall outlet box
•
(optional) One or two separate Ethernet bypass cables run
through the outlet box
After removing your H500 from its package, place it next to
your computer.
•
A computer with an Ethernet port and a wireless card
•
One Cat 5e or better Ethernet cable
Using an Ethernet cable, connect your computer’s network
port to the PoE In port on the back of the H500.
Using an AC adapter (sold separately), connect the H500
12VDC port to a protected power source.
Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
The TCP/IPv4 Properties dialog box appears.
Important! Write down all of the currently active settings so you
can restore your computer to its current configuration later
(when this process is complete).
Select Use the following IP address (if it is not already
selected) and then make the following entries:
Alternatively, connect the PoE port to a PoE injector or switch
for both power and network connections.
•
IP address: 192.168.0.22 (or any address in the
192.168.0.x network, except 192.168.0.1)
Verify that the Power LED on the external enclosure is a steady
green.
•
Subnet mask: 255.255.255.0
•
Default gateway: 192.168.0.1
Leave the DNS server fields empty.
Figure 2: Back view
PoE In Port
Click OK to save your changes.
Your changes are put into effect immediately.
12VDC Port
Copyright © 2014 Ruckus Wireless, Inc.
Draft Published 11 December 2014, Part Number 800-70718-001 Rev A
Page 2 of 4
STEP 4: LOG INTO THE H500 ACCESS POINT
As specified in Step 3: Prepare Your Computer for H500 Setup,
the H500 should be directly connected to your computer (through
the PoE In Ethernet port on the back of the H500) and powered
on, ready for setup.
Default H500 Access Point Settings (for your reference)
Network Names (SSIDs)
Wireless1-Wireless8 (2.4GHz
radio)
Wireless9-Wireless16 (5GHz
radio)
Security (Encryption method)
Disabled for each wireless
interface
Default Management IP
Address
192.168.0.1
On your computer, open a Web browser window.
In the browser, type this URL to connect to the H500:
https://192.168.0.1
Press  to initiate the connection. When a security alert
dialog box appears, click OK/Yes to proceed.
When the Ruckus Wireless Admin login page appears, enter
the following:
STEP 5: CUSTOMIZE THE WIRELESS SETTINGS
•
Username: super
•
Password: sp-admin
Click Login.
On the Web interface menu, click Configuration > Radio
2.4G or Configuration > Radio 5G. The Configure >
Wireless > Common page appears.
Verify that the following options are active:
•
Channel: SmartSelect.
•
Country Code: If you are not located in the United States
of America, select your current country.
Click Update Settings if you made any changes.
In Wireless Availability, click Enabled.
Click Update Settings to save your changes.
Click Logout to exit the Web interface.
Click any of the “Wireless #” (Wireless LAN Number) tabs at
the top of the page.
Delete the text in the SSID field, then type a name for your network that will help your users identify the H500 access point in
their wireless network connection applications.
Repeat Steps 4-7 for each Wireless # (Wireless LAN Number)
interface that you want to enable.
Optional: In a default H500 configuration, the H500 uses a
DHCP-assigned IP address.
If you anticipate logging into the H500 regularly to perform
monitoring or maintenance once it is in place, then you may want
to consider switching from DHCP and instead assigning a static
IP address to the H500.
A.
B.
C.
D.
STEP 6: Mounting Bracket on an Outlet Box
Figure 3: Mounting bracket
Use either the original wall outlet box screws or the factorysupplied 1” Phillips pan head machine screws to attach the
H500 mounting bracket to a single-gang wall outlet box.
Note: The H500 mounting bracket has four hooks that face UP.
Make sure that the hooks are facing up when attaching the
mounting bracket to the wall outlet box.
Pull the uplink Ethernet cable for the H500 from the LAN
through the wall outlet box.
When you are powering the H500 with a customer-ordered
DC power adapter, pull the power cable from the adapter
through the wall outlet box.
When you have extra Ethernet cables (usually one or two) that
are to bypass the H500, pull them through the wall outlet box.
Drape the bypass Ethernet cables across one or both of the
upper hooks on the mounting bracket.
Continue with Step 7: Attaching the H500 to the Mounting
Bracket.
On the menu, click Configuration > Internet.
Click the Static IP option.
Fill in the IP Address and Mask fields.
Click Update Settings to save your changes.
10 When the Ruckus Wireless Admin login page reappears, you
can exit your browser.
11 Disconnect the computer from the H500 and from the power
source, and then restore your computer to its original network
connection configuration.
Continue with Step 6: Mounting Bracket on an Outlet Box.
Copyright © 2014 Ruckus Wireless, Inc.
Draft Published 11 December 2014, Part Number 800-70718-001 Rev A
Page 3 of 4
STEP 7: ATTACHING THE H500 TO THE MOUNTING
BRACKET
Make sure that the mounting bracket is securely fastened as
described in Step 6: Mounting Bracket on an Outlet Box.
If you have bypass Ethernet cables (usually one or two, if any),
then make sure that they are draped across one or both of the
two upper hooks on the mounting bracket.
Figure 4: Attaching the H500 to the Mounting Bracket
To be determined.
If you are installing a customer-supplied USB adapter, then
plug it securely into the USB jack on the bottom of the H500.
Pull the uplink Ethernet cable from your LAN through the outlet
box, and plug it into the back of the H500.
The mounting bracket has two lower hooks that fit into slots
on the bottom of the H500. Rest the bottom of the H500 on
those hooks, and then tilt the H500 until it is up against the
mounting bracket.
STEP 8: TESTING THE H500 OPERATION
After a short pause to re-establish the Internet connection, you can
test the H500.
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously configured.
If you can connect, open a browser and navigate to any public
Web site.
Using any wired computer or other device and an Ethernet
cable, plug into an Ethernet port on the bottom of the H500.
Open a browser and navigate to any public Web site.
Verify that all connected PoE-powered devices and USB
adapters are working correctly.
Repeat Step 3 and Step 4 for the rest of the Ethernet ports on
the bottom of the H500.
Congratulations! Your H500 is active and ready for use.
Note that any optional bypass Ethernet cable(s) should slide
smoothly into the slots on the sides of the H500.
Use a T10 Torx driver to screw the factory-supplied Torx flat
head machine screws through the H500 screw holes into the
threaded inserts on the sides of the mounting bracket.
After the H500 has powered on, it supplies USB power and
PoE Out as described in About Powering Peripheral Devices.
Continue with Step 8: Testing the H500 Operation.
Copyright © 2014 Ruckus Wireless, Inc.
Draft Published 11 December 2014, Part Number 800-70718-001 Rev A
Page 4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Ruckus Wireless, Inc.
Create Date                     : 2007:02:21 14:03:02Z
Modify Date                     : 2014:12:11 01:55:50-08:00
Subject                         : H500 Quick Setup
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Description                     : H500 Quick Setup
Title                           : H500 Quick Setup Guide DRAFT
Creator                         : Ruckus Wireless, Inc.
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : FrameMaker 11.0.2
Metadata Date                   : 2014:12:11 01:55:50-08:00
Document ID                     : uuid:8c897dd2-7e3e-478f-a017-d61e1f4a13d4
Instance ID                     : uuid:645d858e-452c-49a5-9406-420d3f5e60e9
Page Layout                     : OneColumn
Page Mode                       : UseOutlines
Page Count                      : 4

EXIF Metadata provided by EXIF.tools