Ruckus Wireless ZF7025 ZoneFlex 7025 Access Point User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Download:
Mirror Download [FCC.gov]
Document ID	1385535
Application ID	5ASSqgqUmlSzp/gGbJgTjg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.23kB (277865 bits)
Date Submitted	2010-12-03 00:00:00
Date Available	2010-12-03 00:00:00
Creation Date	2007-02-21 14:03:02
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2010-11-30 14:14:50
Document Title	Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Document Creator	FrameMaker 9.0
Document Author:	Ruckus Wireless

•
IP address: 192.168.0.22 (or any address in the
192.168.0.x network--other than 192.168.0.1, which is in
use by the AP)
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
Leave the Alternate DNS server field empty.
IMPORTANT!
If the AP is deployed with ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to
your Ethernet network.
ZoneFlex 7025
Multimedia Wi-Fi Wall Switch
Quick Setup Guide
Click OK to save your changes, exit first the TCP/IP Properties dialog box, and then the Local Area Connection
Properties dialog box.
Your changes are put into effect immediately.
STEP 2: CONNECT THE AP TO YOUR COMPUTER
This Quick Setup Guide provides step-by-step instructions on
how to set up your Ruckus Wireless ZoneFlex 7025 Multimedia
Wi-Fi Wall Switch. After completing the steps described in this
Guide, you will be able to access the Wi-Fi Wall Switch and
begin providing wired and wireless network access to users.
•
Release Notes are available at
•
User Guides are available at
http://support.ruckuswireless.com/documents.
Software Upgrades are available at
•
Open Source information is available at
http://support.ruckuswireless.com/software.
http://support.ruckuswireless.com/open_source.
PACKAGE CONTENTS
•
ZoneFlex 7025 Wi-Fi Wall Switch (Access Point)
•
Mounting bracket with two (2) mounting screws
•
Warranty statement
•
Software license agreement
•
Declaration of Conformity
•
Registration card
•
This Quick Setup Guide
Connect one end of an Ethernet cable to the PoE In LAN
5/Uplink port on the rear of the AP, and connect the other
end to a PoE switch or the Data Out/Power Out port on
the PoE injector.
On your Windows computer, open the Network Connections
(or Network and Dial-up Connections) control panel according
to how the Start menu is set up:
Using another Ethernet cable, connect one end to your
computer’s network port, and connect the other end to
another port on the PoE switch or to the Data In/Network
port on the PoE injector.
Provide power to the PoE injector/switch.
Verify that the Power and LAN 5 LEDs are steady green.
Win XP: Start > Settings > Network Connections
Win 7: Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
STEP 3: LOG INTO THE AP
US version
STEP 1: PREPARE YOUR COMPUTER
http://support.ruckuswireless.com/documents.
•
Remove the AP from its packaging and place it near your computer.
EU version
BEFORE YOU BEGIN
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
FOR
AP SETUP
When the Network Connections window appears, rightclick the icon for Local Area Connection, and then select
Properties.
IMPORTANT!
As specified earlier, the AP should be directly connected to
your computer (through one of the LAN ports), and should be
receiving power from its PoE uplink port.
On your computer, open a Web browser window.
In the browser, type this URL to connect to the AP:
Make sure you do not open the Properties dialog box for
the wireless network.
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and then click Properties.
https://192.168.0.1
Press  to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
When the Ruckus Wireless Admin login page appears,
enter the following:
The TCP/IP Properties dialog box appears.
SETUP REQUIREMENTS
•
A 6mm Phillips screwdriver
•
A computer running Windows XP, Vista or 7.
•
A standard US or EU-style wall outlet box, with an Ethernet
cable run through the wall from your LAN to the outlet box.
•
One of the following:
•
•
An IEEE 802.3af/at-compliant PoE switch.
An IEEE 802.3af/at-compliant PoE injector.
IMPORTANT!
Write down all of the currently active settings so you can
restore your computer to its original configuration later
(when this process is complete).
Select Use the following IP address option (if it is not
already selected), and then make the following entries:
Copyright © 2010 Ruckus Wireless, Inc.
Published September 2010, Part Number 800-70295-001 REV A
• Username: super
• Password: sp-admin
Click Login.
4
Default AP Settings (For Your Reference)
Network Names (SSIDs)
Wireless1—Wireless8
Security (Encryption
method)
Disabled for each wireless
interface
Default Management IP
Address
192.168.0.1
OPTIONAL: TO ENABLE/DISABLE LAN PORTS
E. On the menu, click Configuration > LAN Ports.
F. Click the check boxes next to the ports you want to enable;
uncheck the boxes next to the ports you want to disable.
G. Segment traffic entering LAN ports into VLANs, if needed.
H. Click Update Settings to save your changes.
IF YOUR COMPUTER CANNOT CONNECT TO THE AP
•
Disconnect the AP from the power source, wait 5 seconds,
then reconnect it—and wait 60 seconds before attempting a
reconnection.
•
Disconnect and reconnect the AP and the computer.
•
Replace the Ethernet cable with a new one if the relevant
LAN port LED is not illuminated. (LEDs in each port light up
during a successful connection.)
THE
On the Web interface menu, click Configuration > Wireless.
The Configure::Wireless::Common options appear.
Verify that the following options are active:
•
•
Channel: SmartSelect
Country Code: If you are not located in the United
States, select your current country.
Click Update Settings if you made any changes.
Click any of the eight “Wireless #” tabs.
In Wireless Availability, click Enabled.
Delete the text in the SSID field, and then type the name
of your network. If your network does not have a “name,”
type a short name that will help your users identify the AP
in their wireless network connection application.
Click Update Settings to save your changes.
Repeat Step 4-7 for each Wireless # interface that you
want to enable.
Rear view
STEP 5: RESTORE YOUR COMPUTER’S NETWORK
SETTINGS
(If Windows 7, click Start > Control Panel > Network and
Sharing Center > Change Adapter Settings.)
When the Network Connections window appears, rightclick the icon for the “Local Area Connection” and choose
Properties.
When the Local Area Connection Properties dialog box
appears, select Internet Protocol (TCP/IP) from the scrolling list, and click Properties.
The TCP/IP Properties dialog box appears.
Replace the recent AP connection entries with the entries
from your original network configuration.
Click OK to save your settings and exit first the TCP/IP
Properties dialog box, then the Local Area Connection
Properties dialog box.
Your computer is now ready for normal network use.
STEP 6: MOUNT THE AP TO THE WALL
Ethernet cable supplying PoE power and LAN connectivity
running to the outlet box where the AP will be installed.
Remove the outlet box cover from the outlet box.
Align the mounting bracket with the outlet box so that the
two screw holes line up, and pull the Ethernet cable
through the center of the mounting bracket.
Affix the mounting bracket to the outlet box using the two
mounting screws provided.
D. Click Update Settings to save your changes.
Verify that the Power and LAN 5 LEDs are lit.
Bundle or coil any excess wiring so that it does not protrude or impede AP placement.
Snap the AP onto the mounting bracket by hooking the
two locking tabs on one side of the mounting bracket into
the two cutouts in the plastic housing on one side of the
AP, then push the other side of the AP in toward the wall
until it snaps in place.
Click Start > Settings > Network Connections.
BEFORE YOU BEGIN: Ensure that you have a Cat5e or better
OPTIONAL: IF YOU WANT TO SWITCH FROM DHCP
(DEFAULT)
A. On the menu, click Configuration > Internet.
B. Click the Static IP option.
C. Fill in the IP Address and Mask fields.
110
Punch-down
block
RJ45
PoE In
11 Disconnect the AP from the computer and from the current power source, and then restore your computer’s original network settings.
WIRELESS SETTINGS
Click Logout to exit the Ruckus Web Admin interface.
10 When the Web Admin login page reappears, you can exit
your browser.
STEP 4: CUSTOMIZE
Connect the uplink Ethernet cable to the PoE In LAN 5 /
Uplink port on the rear of the AP. Alternatively, if an RJ-45
connector is not used, you can connect PoE wiring directly
to the punch-down block.
Copyright © 2010 Ruckus Wireless, Inc.
Published September 2010, Part Number 800-70295-001 REV A
Cutouts
Locking
Tabs
You have completed the physical installation.
STEP 7: VERIFY THE INSTALLATION
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously configured.
If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready for
use.
FOR MORE INFORMATION
Refer to the ZoneFlex 7025 User Guide for more detailed
configuration and management information.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide
Creator                         : Ruckus Wireless
Create Date                     : 2007:02:21 14:03:02Z
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2010:11:30 14:14:50+08:00
Metadata Date                   : 2010:11:30 14:14:50+08:00
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:095e0e2e-0d04-4237-9652-c9b17e0cf7bc
Instance ID                     : uuid:2815ee1b-6b05-41a0-8b00-322dad2457e2
Page Count                      : 2
Author                          : Ruckus Wireless

EXIF Metadata provided by EXIF.tools