Ruckus FastIron Ethernet Switch Software Upgrade Guide, 08.0.01 Fast Iron Guide 08001 SW

2017-12-14

• Contents
• Preface
  • Document conventions
  • Brocade Resources
  • Getting technical help
  • Document feedback
• About This Guide
  • Introduction
    • Supported Hardware
    • Unsupported features
  • Audience
  • What’s new in this document
  • Related publications
• Upgrade and downgrade considerations
  • Upgrade and downgrade considerations
    • General considerations
    • Considerations for devices with LAG
    • Considerations for devices in stack configurations
  • Changes between FastIron 07.4.00 and 08.0.xx release
    • New or modified parameter values
      • Management parameter default values
      • Multicast parameter values
      • BGP parameter default values
    • Command changes
      • OSPFv2
      • OSPFv3
      • RIP
      • BGP and Route-Map
      • ARP
      • IGMP-Snooping
      • MLD-Snooping
      • IGMP (L3 Routing)
      • PIM
      • Network Management
  • Changes between FastIron 07.5.00 and 08.0.01 release
• Software Upgrade and Downgrade
  • Software upgrade overview
  • Initial steps
  • Upgrade process
    • Software upgrade on ICX 6610, ICX 6430, ICX 6450, ICX 6650, and FCX devices
    • Software upgrade on FSX devices
    • Software upgrade on ICX 6430-C devices
    • Software upgrade from 07.5.xx to 08.0.01
  • Loading images on the device
    • Load the boot code
      • Load the boot code using TFTP
      • Load the boot code using SCP
    • Load the flash code
      • Load the flash code using TFTP
      • Load the flash code using SCP
  • Upgrade using a manifest file
  • Software downgrade
    • Software downgrade on ICX 6610, ICX 6430, ICX 6450, ICX 6650, and FCX
    • Software downgrade on FSX devices
    • Software downgrade from 08.0.01 to 07.5.xx
  • Upgrading software for TurboIron 24X
    • Upgrading the Boot Code
    • Upgrading the Flash Code
  • Software recovery
    • Software recovery on FCX, FSX, and ICX 6610 devices
    • Software recovery on ICX 6430 and ICX 6450 devices
  • Example of manifest file upgrade
  • Sample output - determining the software versions
    • Example for determining the flash image version
    • Example for determining the boot image versions
    • Example for determining the current licenses installed
• show command output differences between 07.4.00 and 08.0.xxrelease