Ruckus Outdoor AP 106.0 User Guide 106 0 Rev A 20170620 1

2017-06-21

• Copyright Notice and Proprietary Information
• About This Guide
• Safety Warnings
• Related Documentation
• Contents
• Introduction
  • Overview of the Ruckus Wireless AP
  • Installing the Access Point
  • Controller Discovery and Standalone Operation
  • Getting to Know the Access Point Features
    • 7781-CM
    • 7782
    • 7782-E
    • 7782-N
    • 7782-S
    • T300
    • T300e
    • T301n
    • T301s
    • T610
    • T610s
    • T710
    • T710s
• Navigating the Web Interface
  • Navigating the Web Interface
    • When Using a Dual-Band AP
• Configuration
  • Configuring the AP for Management by ZoneDirector
  • Configuring the AP for Management by a SmartZone Controller
  • Configuring the Access Point for Standalone Operation or Management by FlexMaster
    • Configuring Device Settings
    • Configuring Internet Settings
      • VLAN Settings Overview
      • Configuring an NTP Server
      • Configuring the Management VLAN
      • Default IP Addressing Behavior
      • Obtaining and Assigning an IP Address
        • DHCP/Auto Configuration
          • Renewing and Releasing DHCP
          • Configuring IPv4 Auto or Manual Configuration
          • Configuring IPv6 Auto Configuration
        • Configuring a Static IP
        • PPPoE
      • Configuring L2TP Connection Settings
    • Configuring Local Subnets
    • Configuring Wireless Settings
      • Configuring Common Wireless Settings
        • Reviewing Common Advanced Settings
      • Configuring Wireless # (WLAN Number) Settings
        • Using WEP
        • Using WPA
        • Customizing 802.1X Settings
        • Setting Threshold Options
        • Rate Limiting
        • Controlling Access to the Wireless Network
          • Access Control List (ACL) Options
          • Changing Access Controls for a WLAN
          • Removing a MAC Address
    • Configuring Ethernet Ports
      • Setting Ethernet Port Type
        • Trunk Port
        • Access Port
        • General Port
      • Working with Port-Based VLANs
      • Working with 802.1X on Wired Ethernet Ports
    • Configuring Hotspot Service
      • Customizing Hotspot Optional Settings
      • Creating a Hotspot Walled Garden
        • Removing Hotspot Walled Garden Entries
      • Allowing Unrestricted Hotspot Access by MAC Address
• Administration
  • Managing the Access Point
    • Viewing Current Device Settings
    • Viewing Current Internet Connection Settings
    • Viewing Current Local Subnet Settings
    • Viewing Common Wireless Settings
    • Viewing Associated Wireless Clients
    • Changing the Administrative Login Settings
    • Enabling Other Management Access Options
      • Viewing FlexMaster Management Status
      • Pointing the AP to FlexMaster
    • Working with Event Logs and Syslog Servers
      • Enabling Logging and Sending Event Logs to a Syslog Server
      • Sending a Copy of the Log File to Ruckus Wireless Support
      • Saving a Copy of the Log File to Your Computer
    • Upgrading the Firmware
      • Upgrading Manually via FTP or TFTP
      • Upgrading Manually via the Web
      • Upgrading Manually via Local File
      • Scheduling Automatic Upgrades
    • Rebooting the AP and Cable Modem
    • Resetting the AP to Factory Defaults
    • Running Diagnostics
  • Where to Find More Information
• Appendix A: Support for Bluetooth Low Energy Devices
• Appendix B: Configuring Link Aggregation (LACP) for AP Backhaul