Ruckus SmartZone 300 DC Power Cord Accessory Quick Setup Guide For 3.6 Smart Zone (SZ300) SZ300 DCPower Rev A 20171110

User Manual: Ruckus SmartZone 3.6 DC Power Cord Accessory Quick Setup Guide (SZ300)

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

Assembling and Connecting the DC Power
Cord
Use the DC power cord accessory to supply power to the
controller from a DC power source.

SmartZone 300
DC Power Cord Accessory
Quick Setup Guide
This Quick Setup Guide provides basic instructions for
ordering and connecting the DC power cord accessory to the
Ruckus SmartZone 300 (SZ300) controller.

NOTE: For information on the power consumption of the
DC power supply, refer to the data sheet.
Follow these steps to assemble and connect the DC power
cord.

7. Verify that the OK LED on the PSU shows a solid green. A
solid green OK LED indicates that the connection was
successful and the system is ready to be powered on.
You have completed assembling and connecting the DC
power cord assembly to a controller and a DC power source.
Copyright © 2017 Brocade Communications Systems, Inc. All rights
reserved. Ruckus, Ruckus Wireless are trademarks of Ruckus Wireless, Inc.
All other company and product names mentioned in the documentation are
held to be trademarked (and registered) by the primary holders.

1. Remove the DC power cord assembly from its packaging.
FIGURE 1 DC power cord

For information on advanced configuration and management
options, see the Getting Started Guide and other appropriate
documents, which are available for download from the Ruckus
Wireless Support website:
https://support.ruckuswireless.com/documents.

This Guide in Other Languages
请从以下网站获得该指南的简体中文版 https://
support.ruckuswireless.com.
Vous trouverez la version française de ce guide à l'adresse
suivante https://support.ruckuswireless.com.
このガイドの日本語版は https://support.ruckuswireless.com
でご覧ください。
이 가이드의 한국어 버전은 웹 사이트 (https://
support.ruckuswireless.com) 에서 확인하시기 바랍니다.
Veja a versão em português (Brasil) deste guia em https://
support.ruckuswireless.com.
Puede ver la versión en español (América Latina) de esta guía
en https://support.ruckuswireless.com.

DC Power Cord Accessory Ordering
Information
To order a replacement DC power cord accessory for the
SmartZone 300 controller, contact Ruckus Wireless Support.
For information on how to contact Ruckus Wireless Support,
visit https://support.ruckuswireless.com/contact-us. When
asked for the part number, provide the information in the
following table.
Part Number

Description

902-S302DC00

Kit, Spare, DC Power Cable, SZ300

Copyright © 2017 Brocade Communications, Inc.
Published 27 October 2017, Part Number 800-71718-001 Rev A

2. Using the following wire label table as reference, connect
the wires to the power supply.
TABLE 1 Wire label table
Wire Color

Connection

Black

-48V

Red

RTN

Green/Yellow

GRND

3. Power off the power supply source.
4. Connect the DC power cord assembly to the power
source.
5. Connect the other end of the DC power cord to the keyed
connector mating half on the controller's power supply.
6. Power on the DC power source.

Page 1 of 1



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Brocade
Create Date                     : 2017:10:23 23:51:24Z
Modify Date                     : 2017:11:10 12:39:39+05:30
Subject                         : SmartZone 300 DC Power Cord Accessory Quick Setup Guide for SmartZone 3.6
Language                        : EN-US
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Creator                         : Brocade
Title                           : SmartZone 300 DC Power Cord Accessory Quick Setup Guide for SmartZone 3.6
Description                     : SmartZone 300 DC Power Cord Accessory Quick Setup Guide for SmartZone 3.6
Creator Tool                    : AH XSL Formatter V6.4 R1 for Windows (x64) : 6.4.2.26942 (2016/12/07 15:30JST)
Metadata Date                   : 2017:11:10 12:39:39+05:30
Producer                        : Antenna House PDF Output Library 6.4.928 (Windows (x64))
Trapped                         : False
Document ID                     : uuid:9cd6e559-69a6-431f-a908-827b9950c9ec
Instance ID                     : uuid:7b5bf6a5-e359-403f-a276-e8812e0dd62f
Page Mode                       : UseOutlines
Page Count                      : 1

EXIF Metadata provided by EXIF.tools