Ruckus Wireless AP ZF2942/7942 Quick Setup Guide Zone Flex ZF7055 7055 QSG 800 70432 001 Rev B 20130614
2013-05-29
User Manual: Ruckus ZoneFlex ZF7055 Quick Setup Guide
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
PACKAGE CONTENTS ZoneFlex 7055 Dual-Band Multimedia Wi-Fi Wall Switch Quick Setup Guide This Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless ZoneFlex 7055 Multimedia Wi-Fi Wall Switch. After completing the steps described in this Guide, you will be able to access the Wi-Fi Wall Switch and begin providing wired and wireless network access to users. NOTE: The ZoneFlex 7055 requires a minimum of ZoneFlex firmware version 9.6 and above to operate. 1 • ZoneFlex 7055 Wi-Fi Wall Switch (Access Point) • Mounting bracket • (2) Low-profile Phillips head mounting screws • (2) Torx bracket screws • Regulatory flyer • This Quick Setup Guide Start > Control Panel > Network and Sharing Center > Change Adapter Settings • A Phillips screwdriver • A T10 Torx screwdriver • A notebook with an Ethernet port and a wireless card. • A standard US or EU-style wall outlet box, with an Ethernet cable run through the wall from your LAN to the outlet box. • One of the following: 请从以下网站获得该指南的简体中文版 https://support.ruckuswireless.com. 請造訪以下網址，取得此手冊的繁體中文版本 https://support.ruckuswireless.com. Vous trouverez la version française de ce guide à l'adresse suivante https://support.ruckuswireless.com. こ の ガ イ ド の⽇本語版は https://support.ruckuswireless.com で ご 覧 く だ さ い。 When the Network Connections window appears, rightclick the icon for Local Area Connection, and then select Properties. When the Local Area Connection Properties dialog box appears, select Internet Protocol Version 4 (TCP/ IPv4) from the scrolling list, and then click Properties. 3 Select Use the following IP address option (if it is not already selected), and then make the following entries: The TCP/IP Properties dialog box appears. • An IEEE 802.3af/at-compliant PoE switch. An IEEE 802.3af/at-compliant PoE injector. An optional DC power adapter (Ruckus part #9020170-XX10, sold separately) • • 4 four front ports, as this can seriously damage the device. PoE in power supply should only be connected to the PoE In LAN/Uplink port on the rear of the device. Click OK to save your changes, and exit the TCP/IP Properties dialog box, and the Local Area Connection Properties dialog box. Your changes are put into effect immediately. STEP 2: CONNECT THE AP TO YOUR COMPUTER 1 Remove the AP from its packaging and place it near your computer. 2 Connect one end of an Ethernet cable to the PoE In LAN 5/Uplink port on the rear of the AP, and connect the other end to a PoE switch or the Power Out port on the PoE injector. 이 가이드의 한국어 버전은 웹 사이트 (https://support.ruckuswireless.com) 에서 확인하시기 바랍니다 . Veja a versão em português (Brasil) deste guia em https://support.ruckuswireless.com. Puede ver la versión en español (América Latina) de esta guía en https://support.ruckuswireless.com • 3 If PoE power is not available, the AP can be powered using an optional DC power adapter (Ruckus part #902-0170-XX10, sold separately) Using another Ethernet cable, connect one end to your computer’s network port, and connect the other end to another port on the PoE switch or to the Data In/Network port on the PoE injector. 4 Provide power to the PoE injector/switch. 5 Verify that the PWR LED is steady green. BEFORE YOU BEGIN Before deploying Ruckus Wireless products, please check for the latest software and the release documentation. IP address: 192.168.0.22 (or any address in the 192.168.0.x network--other than 192.168.0.1, which is in use by the AP) Subnet mask: 255.255.255.0 Default gateway: 192.168.0.1 Leave the DNS server fields empty. \ WARNING! DO NOT connect a PoE injector to any of the THIS GUIDE IN OTHER LANGUAGES 2 SETUP REQUIREMENTS • • • On your Windows 7 computer, open the Network Connections (or Network and Dial-up Connections) control panel: STEP 1: PREPARE YOUR COMPUTER SETUP FOR AP • Release Notes and User Guides are available at http://support.ruckuswireless.com/documents. NOTE: • Software Upgrades, Open Source Information and Product Warranty/Software License Agreement documents are also available at: http://support.ruckuswireless.com/ The following instructions assume Windows 7 as the operating system. Procedures for other OS’s are similar. Copyright © 2013 Ruckus Wireless, Inc. Published June 2013, Part Number 800-70432-001 Rev B NOTE: If PoE is not available, the 7055 can be powered by Ruckus Wireless power adapter (part number 9020170-xx10). STEP 3: LOG INTO THE AP 1 Open a Web browser window. and enter this URL to connect to the AP: https://192.168.0.1 2 Pressto initiate the connection. When a security alert dialog box appears, click OK/Yes to proceed. 3 When the Ruckus Wireless Admin login page appears, enter the following: 4 2 THE WIRELESS SETTINGS Verify that the following options are active: Channel: SmartSelect Country Code: If you are not located in the United States, select your current country. Click Update Settings if you made any changes. 4 Click any of the eight “Wireless #” tabs at the top of the page. 5 In Wireless Availability, click Enabled. 6 Delete the text in the SSID field and enter a name for the wireless network that will help your users identify the AP in their wireless network connection application. 7 Click Update Settings to save your changes. 8 Repeat Steps 4-7 for each Wireless # interface that you want to enable. 9 Click Logout to exit the Ruckus Web Admin interface. 10 Disconnect the AP from the computer and from the current power source, and then restore your computer’s original network settings. STEP 5: MOUNT THE AP TO THE OUTLET BOX IMPORTANT: Ensure that you use a Cat5e or better Ether- 2 Remove the outlet box cover from the outlet box, retaining the original box cover screws. • Align the mounting bracket with the outlet box so that the screw holes line up (the bracket provides multiple holes for different outlet box designs), and pull the Ethernet cable through the center of the mounting bracket. • Affix the mounting bracket to the outlet box using the original outlet box cover screws. If the original outlet box screw heads extend over 2mm from the bracket, then use the enclosed low profile mounting screws instead. • Run the required cables through the electrical outlet box allowing sufficient slack for the cables to reach the not yet installed ZoneFlex 7055. Connect the cables. • • • Connect an Ethernet cable providing PoE power and network connectivity to the PoE In LAN / Uplink port using either a standard RJ45 connector or the 110 punch-down block. Do not connect both. (See ZoneFlex Indoor Access Point User Guide for ZF 7055 110 punch-down block wiring details). If PoE power is not available, the AP can be powered using an optional DC power adapter (Ruckus part #902-0170-XX10, sold separately) If required, connect the cable providing support for pass-through devices to the Pass Through port. Pass Through port 110 Punch-down block PoE In LAN/Uplink Prepare the electrical outlet box. The ZoneFlex 7055 can be mounted to a variety of commonly used electrical outlet box formats, including US- 3 Mount the AP to the bracket. • • Snap the AP onto the mounting bracket by hooking the two locking tabs on the bottom of the bracket into the slots on the bottom of the AP. Then push the top of the AP in toward the wall until it snaps in place. Use the two Torx bracket screws provided to secure the AP to the mounting bracket using a T10 Torx screwdriver. Torx bracket screw You have completed the physical installation. net cable to supply PoE power and LAN connectivity running to the outlet box where the AP will be installed. 1 NOTE: The status LEDs are intentionally not visible once the 7055 is mounted. Complete any verification or troubleshooting that requires visibility of the LEDs before mounting. • On the Web interface menu, click Configuration > Wireless [2.4G/5G]. The Configure :: Wireless :: Common options appear. • • 3 NOTE: The ZoneFlex 7055 comes with a bracket for a single 1-gang electrical outlet box. For adjacent outlet boxes, use the optional Ruckus Wireless ZF7055 adjacent wall bracket kit (part number 902-0111-000). • Username: super • Password: sp-admin Click Login. STEP 4: CUSTOMIZE 1 style outlet boxes conforming to NEMA-WD6, and EUstyle outlet boxes conforming to BS 4662. Rear view Copyright © 2013 Ruckus Wireless, Inc. Published June 2013, Part Number 800-70432-001 Rev B FOR MORE INFORMATION Refer to the ZoneFlex Indoor Access Point User Guide for more detailed configuration and management information.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Language : en XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Creator : Ruckus Wireless Title : Ruckus Wireless AP ZF2942/7942 Quick Setup Guide Create Date : 2007:02:21 14:03:02Z Creator Tool : FrameMaker 11.0.2 Modify Date : 2013:06:14 13:26:20+08:00 Metadata Date : 2013:06:14 13:26:20+08:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:5b4d7f67-25e9-4da5-a90f-062cd805a262 Instance ID : uuid:fd88edf5-e070-4877-8a22-42523e7d3922 Page Mode : UseOutlines Page Count : 2 Author : Ruckus WirelessEXIF Metadata provided by EXIF.tools