Ruckus VSCG Getting Started Guide For RuckOS 3.0.3 V SCG Ruck OS 3 0 20150130

2015-01-30

• Contents
• About This Guide
  • Document Conventions
  • Related Documentation
  • Documentation Feedback
• Preparing to Install the vSCG
  • Preparing a Hypervisor
  • Obtaining the vSCG Distribution
  • Preparing the vSCG Interface Settings to Use
  • Determining the System Resources That the Virtual Machine Requires
• Installing the vSCG on a Hypervisor
  • Installing the vSCG on VMWare™ vSphere Hypervisor
    • Before You Begin
    • Creating a vSCG Instance from the OVA File
    • Allocating Resources and Assigning Network Interfaces
    • Configuring the Interfaces
    • Setting Up the vSCG Interface or Interfaces
      • Setting Up a vSCG with One Interface
      • Setting Up a vSCG with Three Interfaces
        • Important Notes About Selecting the System Default Gateway
  • Installing the vSCG on a Kernel-based Virtual Machine Hypervisor
    • Extracting the vSCG Image
    • Setting Up the vSCG
• Using the Setup Wizard to Install vSCG
  • Before You Begin
  • Step 1: Start the Setup Wizard and Set the Language
  • Step 2: Select the Profile Configuration That Corresponds to Your vSCG License
  • Step 3: Configure the Management IP Settings
  • Step 4: Configure the Cluster Settings
    • If This vSCG Is Forming a New Cluster
    • If This vSCG Is Joining an Existing Cluster
  • Step 5: Set the Administrator Password
  • Step 6: Verify the Settings
  • Logging On to the Web Interface
• Configuring the vSCG Carrier for the First Time
  • Creating an AP Zone
  • Configuring AAA Servers and Hotspot Settings
    • Adding an AAA Server
    • Creating a Hotspot Service
  • Creating a Registration Rule
    • Configuring the Rule Priority
  • Defining the WLAN Settings of an AP Zone
    • General Options
    • WLAN Usage
    • Authentication Options
    • Encryption Options
      • Method
      • Algorithm (For WPA or WPA2 Encryption Only)
      • WEP Key/Passphrase
    • Authentication & Accounting Service
    • Options
    • RADIUS Options
    • Advanced Options
  • Configuring DHCP Option 43
  • Verifying That Wireless Clients Can Associate with a Managed AP
  • What to Do Next
• Ensuring That APs Can Discover the Controller on the Network
  • Is LWAPP2SCG Enabled on the Controller?
    • Obtaining the LWAPP2SCG Application
    • Enabling LWAPP2SCG
  • Method 1: Perform Auto Discovery of the Controller Using the SmartLicense Server
  • Method 2: Perform Auto Discovery on Same Subnet, then Transfer the AP to Intended Subnet
  • Method 3: Register the Controller with the DNS Server
  • Method 4: Configure DHCP Option 43 on the DHCP Server
  • Method 5: Manually Configure the Controller Address on the AP’s Web Interface
  • What to Do Next
• Index