Runco Cl 610 Users Manual Cl610 Cl610LT Cw_manual

2015-02-06

• TWO YEAR LIMITED WARRANTY
• Safety Precautions
• 1. Introduction
  • 1.1 About This Manual
    • Target Audience
    • If You Have Comments About This Manual...
    • Textual and Graphic Conventions
      • Text Conventions
      • Graphic Conventions
  • 1.2 Using This Manual
  • 1.3 Description, Features and Benefits
    • Key Features and Benefits
    • Parts List
      • Optional Accessories
• 2. Controls and Functions
  • 2.1 CL-610 at a Glance
    • Front/Side/Top View
      • Figure 2-1 . CL-610 Front/Side/Top View
    • Rear/Side/Bottom View
      • Figure 2-2 . CL-610 Rear/Bottom/Side View
  • 2.2 Lens Controls and Status Indicators
    • Figure 2-3 . CL-610 Lens Controls and Status Indicators
  • 2.3 CL-610 Connector Panel
    • Figure 2-4 . CL-610 Connector Panel
  • 2.4 CL-610 Remote Control
    • Figure 2-5 . CL-610 Remote Control
• 3. Installation
  • 3.1 Remote Control
    • Notes on Batteries
    • Notes on Remote Control Operation
  • 3.2 Quick Setup
    • Table 3-1 . Installation Overview
  • 3.3 Installation Considerations
    • Installation Type
      • Table 3-2 . Projector Installation Options
    • Ambient Light
    • Throw Distance
      • Figure 3-1 . Estimating Throw Distance
      • Table 3-3 . Throw Ratios for the CL-610 Series
    • Vertical and Horizontal Position
      • Figure 3-2 . Projector Placement
    • Folded Optics
      • Figure 3-3 . Folded Optics
    • Other Considerations
  • 3.4 Mounting the CL-610
    • Floor Mounting (Upright)
    • Ceiling Mounting (Inverted)
    • Adjusting the Projector Height or Projection Angle
  • 3.5 Connections to the CL-610
    • Connector Panel Access
    • Connecting Source Components to the CL-610
      • HDMI/DVI Connections
        • Figure 3-4 . HDMI/DVI Source Connections
      • RGB Connections
        • Figure 3-5 . RGB Connections
      • Progressive Component Video Connections
        • Figure 3-6 . Progressive Component Video Connections
      • Composite/S-Video/Component Video Connections
        • Figure 3-7 . Composite, S-Video and Component Video Connections
    • RS-232 Controller Connection
      • Figure 3-8 . RS-232 Control System Connection
    • Connecting 12-volt Trigger Output to External Theater Equipment
      • Figure 3-9 . Connecting the 12-Volt Trigger Output to Other Equipment
    • Connecting to AC Power
  • 3.6 Turning On the Power
  • 3.7 Changing the OSD Language
  • 3.8 Adjusting the Picture Orientation
  • 3.9 Zoom and Focus Adjustments
  • 3.10 Installing and Adjusting the CineWide Anamorphic Lens
    • Figure 3-10 . Anamorphic Lens Mounting Assembly - Exploded View
    • Remove the Projector Front Jewelry
    • Installing the Anamorphic Lens
    • Adjusting the Anamorphic Lens
      • Height (Y) Adjustment
      • Adjusting the Pitch (Angle)
• 4. Operation
  • 4.1 Selecting Video Memory
  • 4.2 Selecting an Aspect Ratio
  • 4.3 Selecting An Input Source
  • 4.4 Using Picture-In-Picture and Picture-By-Picture (PIP/PBP)
  • 4.5 Turning Off the Power
  • 4.6 Using the On-Screen Menus
    • Figure 4-1 . CL-610 OSD Menu Structure
    • Main Menu
    • Picture Adjustment
      • Brightness
        • Figure 4-2 . Typical PLUGE Pattern for Adjusting Brightness
      • Contrast
        • Figure 4-3 . Typical Gray Bar Pattern for Adjusting Contrast
      • Color Saturation
        • Figure 4-4 . Typical Color Bar Pattern for Adjusting Color Saturation and Tint
      • Tint
      • Sharpness
        • Figure 4-5 . Typical Test Pattern for Adjusting Sharpness
      • Filter
      • Color Temperature
      • ICC Selection
      • Store Image Settings
      • Restore Image Settings
    • Aspect Ratio
      • Table 4-1 . Aspect Ratio Settings
    • Installation
      • Language
      • Picture Orientation
      • Keystone Adjust
      • Background Color
      • RS-232 Baud Rate
      • Blue Image
    • Option
      • Reset Image Settings
      • Sleep Timer
      • Lamp Hours
      • OSD Timer
      • PC & HD Adjust
      • PIP/PBP Set Up
      • DNR
    • Set Up
      • White Balance
      • Gamma Selection
      • SD Enhance
      • Image Over Scan
      • Image Shift
      • Amplitude Adjust
      • Horizontal Masking (CL-610/CineWide and CL-610LT/CineWide only)
      • Video Black Level
      • Lamp Power
      • Remote Control
      • Reset Lamp Timer
      • Fan Control
      • Return to User OSD
    • ISF Calibration
      • Reset Picture Adjust
      • Picture Adjust
      • White Balance / Gamma Selection
      • Blue Image
      • ICC Adjust
      • Store Settings
      • Splash Screen Timer
      • ISF Enable
      • Return to User OSD
• 5. Maintenance and Troubleshooting
  • 5.1 Lamp Replacement
  • 5.2 Troubleshooting Tips
    • Table 5-1 . Troubleshooting Chart
• 6. Serial Communications
  • 6.1 RS-232 Connection and Port Configuration
  • 6.2 Serial Command Syntax
    • Table 6-1 . Serial Commands
• 7. Specifications
  • 7.1 CL-610 Specifications
    • Table 7-1 . CL-610 Specifications
  • 7.2 CL-610 Dimensions
    • Figure 7-1 . CL-610 Dimensions
• Appendix A. Personalizing the ISF Splash Screen on the CL-610