Runtop WA4020 802.11g USB Adapter User Manual Manual

Runtop Inc 802.11g USB Adapter Manual

Manual

802.11g USB Network Adapter1The information in this guide may change without notice. The manufacturerassumes no responsibility for any errors that may appear in this guide.Ethernet is a trademark of XEROX Corporation. Microsoft, Windows andWindows logo are trademarks of Microsoft Corporation.Copyright 2003, Manufacturer. All right reserved. No Part of the contents ofthis guide maybe transmitted or reproduced in any form or by any meanswithout the written permission of manufacturer. Printed in Taiwan.The revision date for this guide is Sep 3th, 2004Version 1.0z Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate thisequipment.
802.11g USB Network Adapter2 IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operatinginstructions for satisfying RF exposure compliance. This device complies with FCC RF Exposure limits set forth for an uncontrolledenvironment, under 47 CFR 2.1093 paragraph (d)(2)This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.CE Mark WarningThis is a Class B product. In a domestic environment, this product may causeradio interference in which case the user may be required to take adequatemeasures.
802.11g USB Network Adapter3IntroductionThank you for purchasing 802.11g USB Network Adapter. Before you startinstalling the USB Network Adapter, please verify the following parts in thepackage.Package ContentsThe package contains the following: One 802.11g USB Network Adapter One USB 2.0 cable One CD Driver One Quick Installation GuideIf you do not have any of the items listed above, please contact your localdistributors or authorized resellers of Manufacturer.FeaturesThe features include: Establishes a wireless connection without the hassles and cost ofcabling Operates Ad-Hoc or Infrastructure mode Utilizes up to 256-bit WEP encryption Enjoys high-speed data transfer rate up to 54 Mbps Employs automatic data rate switching which offers maximumreliability, throughput and connectivity Possesses the network’s range up to 100 meters indoor and 300meters outdoor Monitors and configures the network via the supplied friendly-interfaced application –Wireless-G Configuration ToolGetting to Know 802.11g USB Network Adapter
802.11g USB Network Adapter4Your wireless 802.11g USB Network Adapter should be located in the USBport of your computer.ViewLEDStatus Indicator DescriptionLINK Lights to indicate the adapter is successfullyconnected to a network.ACT Blinks to indicate the adapter is activelytransmitting or working.Note: The 802.11g USB Network Adapter is packaged with a supplied USB2.0 cable. You can use the cable to move the adapter easily.Installing 802.11g USB Network AdapterTo install the 802.11g USB Network Adapter, please follow the steps:Note: You can choose either the configuration utility we offered orWindows XP build-in configuration utility to install.LED
802.11g USB Network Adapter5If you want to use our configuration utility1. Insert the supplied Setup CD into your CD-ROM drive, and click the drive ofCD-ROM. You will see the Driver and Utility folders. Click into the Utilityfolder, and select USB_Setup to install the driver and the configurationutility2. The InstalledShield Wizard will appear. Click Next.3. The Choose Destination Location screen will appear. You can clickBrowse to choose the destination folder. Or click Next to proceed.
802.11g USB Network Adapter64. The installing status is showed in screen. When the process is finished, thedriver is installed successfully.
802.11g USB Network Adapter75. Plug Wireless 802.11g USB Network Adapter into a USB 2.0 port on yourPC or notebook. Or you can plug the Network Adapter with the suppliedUSB cable. Then, Found New Hardware Wizard will appear. Follow thewizard to install software. Select Install the software automatically(Recommended).
802.11g USB Network Adapter86. The wizard will search for the USB software. Click Next to proceed.
802.11g USB Network Adapter97. The wizard has finished installing the software. Click Finish.
802.11g USB Network Adapter108. After completing the Found New Hardware Wizard, a new icon willappear in your Icon tray. Check the icon to make sure that the utility isinstalled successfully.9. Click icon, then a box will pop out to ask you for the configuration tool. Ifyou want to use the utility we offer to configure the Wireless LAN, click Yes.10. If the networking is working right now, the icon will appear in the icon
802.11g USB Network Adapter11tray. Double click icon. The utility screen will appear.Wireless LAN Configuration Tool Main ScreenYou can view the available network with the SSID on the list. For the currentnetwork information, it shows channel, station type, SSID, Tx rate, and Encrypt.To have detail information, click More Setting. Click Refresh to search newnetworks.
802.11g USB Network Adapter12More SettingAfter clicking More Setting, you are allowed to set the connection by clickingChange, then Apply to confirm the setting.
802.11g USB Network Adapter13General Connection SettingChannel: The network adapter will automatically match the channel ofavailable network. In the Ad-hoc mode, you can select the channel manually.Tx Rate: Tx Rate is set as Auto generally to go with the rate of access point.
802.11g USB Network Adapter14You can also set the rate manually.SSID: SSID is listed in the available network table. You can type in the SSIDyou would connect.Network Type: Select your network type with Infrastructure or Ad-hocmode.Encryption: Encryption builds a security way to protect the data intransmission. You can disable the function or select the encryption mode.Authentication Mode: Select the authentication mode you would apply.Encryption SettingWEP Key Setting: As encryption mode is WEP, configure the WEP key settingby clicking Change.
802.11g USB Network Adapter15WPA Setting: Configure the WPA setting by clicking Change.
802.11g USB Network Adapter16ProfileProfile name: Type in the profile name you choose to save the current setting.You can restore the setting later by selecting the profile directly.OtherAdvanced Setting: To set the advanced setting, click Advanced Setting.
802.11g USB Network Adapter17 Information: System information shows the driver version, utility version, andMAC address of the network adapter.If you want to use Windows XP build-in configuration utility1. Plug the adapter into your system first, the Found New Hardware Wizardwill appear.
802.11g USB Network Adapter182. After installation, click icon, to see the wireless networking connectionstatus. Click Content, then Wireless Network Connection Propertiesscreen will appear.
802.11g USB Network Adapter193. Select Wireless Networks, and make sure that Use Windows to configuremy wireless network settings option is checked. Now, you can set yournetworks, which is available on the list.SpecificationsTechnical SpecificationsStandards IEEE 802.11b, IEEE 802.11gChannels 11 channels (US, Canada), 13 channels (Europe), 14channels/CCK, 13channels/OFDM (Japan), 4channels
802.11g USB Network Adapter20(France), 2 channels (Spain)ModulationDSSS•Differential Binary Phase Shift Keying (DBPSK) at1Mbps•Differential Quadrature Phase Shift Keying (DQPSK) at2Mbps•Complementary Code Keying (CCK) at 5.5 and11MbpsOFDM•BPSK at 6 and 9Mbps•QPSK at 12 and 18Mbps•16-Quadrature Amplitude Modulation (QAM) at 24 and36Mbps•64-QAM at 48 and 54MbpsSpread Spectrum DSSS (11b), OFDM (11g)Media AccessControl CSMA/CAAntenna Single Chip AntennaTransmissionRange Outdoor: 100~300 M, Indoor 30~100 MTransmission Rate - IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, & 54 Mbps- IEEE 802.11b: 1, 2, 5.5, 11MbpsFrequency Band 2.400~2.483.5GHz (subject to local regulations)LED Link, ActTransmit Power802.11b: 17dBm802.11g: 6/9Mbps 17dBm, 12/18Mbps 15dBm 24Mbps 14dBm, 36Mbps 14dBm 48Mbps 12dBm, 54Mbps 12dBmWired EquivalentPrivacy64/128 bit WEP Encryption802.1x/WPA (Windows XP SP1 or Windows 2000 SP4)Output Power 14dBm (Typical)Interface USB2.0 (USB1.1 compatible)Compatibility Windows 98SE/ME/2000/XPEnvironmental InformationDimensions (WxDxH) 82 x 28 x 10 (mm), 3.2 x 1.1 x 0.4 (inch)Weight (Net/Gross) 38g (1.4oz)Operating Voltage 5 VStandard Conformance FCC A, CEOperating Temperature 0°C to 40°C (32°F to 104°F)Storage Temperature -40°C to 70°C (-40°F to 158°F)
802.11g USB Network Adapter21Operating Humidity 20% to 95% Non-condensingStorage Humidity 20% to 95% No-condensingWarranty InformationManufacturer provides this limited warranty for its product only to the person orentity who originally purchased the product from Manufacturer or its authorizedreseller or distributor. Manufacturer guarantees that equipment is free fromphysical defects in workmanship and material under normal use from the dateof original retail purchase of the Hardware. If the product proves defectiveduring this warranty period, call Manufacturer Customer Service in order toobtain a Return Authorization number. Be sure to have a proof of purchase onhand when calling. Return requests cannot be processed without proof ofpurchase. When returning a product, mark the Return Authorization Numberclearly on the package pack and include your original proof of purchase.In no event shall Manufacturer’s liability exceed the price paid for the productfrom direct, incidental or consequential damage resulting from the use of theproduct, its accompanying software, or its documentation. Manufacturermakes no warranty or representation, expressed, implied, or statutory, with
802.11g USB Network Adapter22respect to its products or the contents or use of this documentation and allaccompanying software, and specifically disclaims its quality, performance,merchantability, or fitness for any particular purpose. Manufacturer reservesthe right to revise or update its products, software, or documentation withoutobligation to notify any individual or entity.

Navigation menu