Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 466236 |
| Application ID | RRU6wy6iEjbbanPK8hupPg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 68.27kB (853410 bits) |
| Date Submitted | 2004-09-08 00:00:00 |
| Date Available | 2004-09-07 00:00:00 |
| Creation Date | 2004-09-02 12:32:38 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2004-09-02 20:34:34 |
| Document Title | Microsoft Word - WA4020 CD User Guide _NB_ with new FCC.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | WendyLiao |
802.11g USB Network Adapter The information in this guide may change without notice. The manufacturer assumes no responsibility for any errors that may appear in this guide. Ethernet is a trademark of XEROX Corporation. Microsoft, Windows and Windows logo are trademarks of Microsoft Corporation. Copyright 2003, Manufacturer. All right reserved. No Part of the contents of this guide maybe transmitted or reproduced in any form or by any means without the written permission of manufacturer. Printed in Taiwan. The revision date for this guide is Sep 3th, 2004 Version 1.0z Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 802.11g USB Network Adapter IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. 802.11g USB Network Adapter Introduction Thank you for purchasing 802.11g USB Network Adapter. Before you start installing the USB Network Adapter, please verify the following parts in the package. Package Contents The package contains the following: One 802.11g USB Network Adapter One USB 2.0 cable One CD Driver One Quick Installation Guide If you do not have any of the items listed above, please contact your local distributors or authorized resellers of Manufacturer. Features The features include: Establishes a wireless connection without the hassles and cost of cabling Operates Ad-Hoc or Infrastructure mode Utilizes up to 256-bit WEP encryption Enjoys high-speed data transfer rate up to 54 Mbps Employs automatic data rate switching which offers maximum reliability, throughput and connectivity Possesses the network’s range up to 100 meters indoor and 300 meters outdoor Monitors and configures the network via the supplied friendlyinterfaced application –Wireless-G Configuration Tool Getting to Know 802.11g USB Network Adapter 802.11g USB Network Adapter Your wireless 802.11g USB Network Adapter should be located in the USB port of your computer. View LED LED Status Indicator Description LINK Lights to indicate the adapter is successfully connected to a network. ACT Blinks to indicate the adapter is actively transmitting or working. Note: The 802.11g USB Network Adapter is packaged with a supplied USB 2.0 cable. You can use the cable to move the adapter easily. Installing 802.11g USB Network Adapter To install the 802.11g USB Network Adapter, please follow the steps: Note: You can choose either the configuration utility we offered or Windows XP build-in configuration utility to install. 802.11g USB Network Adapter If you want to use our configuration utility 1. Insert the supplied Setup CD into your CD-ROM drive, and click the drive of CD-ROM. You will see the Driver and Utility folders. Click into the Utility folder, and select USB_Setup to install the driver and the configuration utility 2. The InstalledShield Wizard will appear. Click Next. 3. The Choose Destination Location screen will appear. You can click Browse to choose the destination folder. Or click Next to proceed. 802.11g USB Network Adapter 4. The installing status is showed in screen. When the process is finished, the driver is installed successfully. 802.11g USB Network Adapter 5. Plug Wireless 802.11g USB Network Adapter into a USB 2.0 port on your PC or notebook. Or you can plug the Network Adapter with the supplied USB cable. Then, Found New Hardware Wizard will appear. Follow the wizard to install software. Select Install the software automatically (Recommended). 802.11g USB Network Adapter 6. The wizard will search for the USB software. Click Next to proceed. 802.11g USB Network Adapter 7. The wizard has finished installing the software. Click Finish. 802.11g USB Network Adapter 8. After completing the Found New Hardware Wizard, a new icon will appear in your Icon tray. Check the icon to make sure that the utility is installed successfully. 9. Click icon, then a box will pop out to ask you for the configuration tool. If you want to use the utility we offer to configure the Wireless LAN, click Yes. 10. If the networking is working right now, the 10 icon will appear in the icon 802.11g USB Network Adapter tray. Double click icon. The utility screen will appear. Wireless LAN Configuration Tool Main Screen You can view the available network with the SSID on the list. For the current network information, it shows channel, station type, SSID, Tx rate, and Encrypt. To have detail information, click More Setting. Click Refresh to search new networks. 11 802.11g USB Network Adapter More Setting After clicking More Setting, you are allowed to set the connection by clicking Change, then Apply to confirm the setting. 12 802.11g USB Network Adapter General Connection Setting Channel: The network adapter will automatically match the channel of available network. In the Ad-hoc mode, you can select the channel manually. Tx Rate: Tx Rate is set as Auto generally to go with the rate of access point. 13 802.11g USB Network Adapter You can also set the rate manually. SSID: SSID is listed in the available network table. You can type in the SSID you would connect. Network Type: Select your network type with Infrastructure or Ad-hoc mode. Encryption: Encryption builds a security way to protect the data in transmission. You can disable the function or select the encryption mode. Authentication Mode: Select the authentication mode you would apply. Encryption Setting WEP Key Setting: As encryption mode is WEP, configure the WEP key setting by clicking Change. 14 802.11g USB Network Adapter WPA Setting: Configure the WPA setting by clicking Change. 15 802.11g USB Network Adapter Profile Profile name: Type in the profile name you choose to save the current setting. You can restore the setting later by selecting the profile directly. Other Advanced Setting: To set the advanced setting, click Advanced Setting. 16 802.11g USB Network Adapter Information: System information shows the driver version, utility version, and MAC address of the network adapter. If you want to use Windows XP build-in configuration utility 1. Plug the adapter into your system first, the Found New Hardware Wizard will appear. 17 802.11g USB Network Adapter 2. After installation, click icon, to see the wireless networking connection status. Click Content, then Wireless Network Connection Properties screen will appear. 18 802.11g USB Network Adapter 3. Select Wireless Networks, and make sure that Use Windows to configure my wireless network settings option is checked. Now, you can set your networks, which is available on the list. Specifications Technical Specifications Standards Channels IEEE 802.11b, IEEE 802.11g 11 channels (US, Canada), 13 channels (Europe), 14 channels/CCK, 13channels/OFDM (Japan), 4channels 19 802.11g USB Network Adapter (France), 2 channels (Spain) DSSS •Differential Binary Phase Shift Keying (DBPSK) at 1Mbps •Differential Quadrature Phase Shift Keying (DQPSK) at 2Mbps Modulation •Complementary Code Keying (CCK) at 5.5 and 11Mbps OFDM •BPSK at 6 and 9Mbps •QPSK at 12 and 18Mbps •16-Quadrature Amplitude Modulation (QAM) at 24 and 36Mbps •64-QAM at 48 and 54Mbps Spread Spectrum DSSS (11b), OFDM (11g) Media Access CSMA/CA Control Single Chip Antenna Antenna Transmission Outdoor: 100~300 M, Indoor 30~100 M Range - IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, & 54 Mbps Transmission Rate - IEEE 802.11b: 1, 2, 5.5, 11Mbps Frequency Band 2.400~2.483.5GHz (subject to local regulations) Link, Act LED 802.11b: 17dBm 802.11g: 6/9Mbps 17dBm, 12/18Mbps 15dBm Transmit Power 24Mbps 14dBm, 36Mbps 14dBm 48Mbps 12dBm, 54Mbps 12dBm Wired Equivalent 64/128 bit WEP Encryption 802.1x/WPA (Windows XP SP1 or Windows 2000 SP4) Privacy 14dBm (Typical) Output Power USB2.0 (USB1.1 compatible) Interface Windows 98SE/ME/2000/XP Compatibility Environmental Information Dimensions (WxDxH) Weight (Net/Gross) Operating Voltage Standard Conformance Operating Temperature Storage Temperature 82 x 28 x 10 (mm), 3.2 x 1.1 x 0.4 (inch) 38g (1.4oz) 5V FCC A, CE 0°C to 40°C (32°F to 104°F) -40°C to 70°C (-40°F to 158°F) 20 802.11g USB Network Adapter Operating Humidity Storage Humidity 20% to 95% Non-condensing 20% to 95% No-condensing Warranty Information Manufacturer provides this limited warranty for its product only to the person or entity who originally purchased the product from Manufacturer or its authorized reseller or distributor. Manufacturer guarantees that equipment is free from physical defects in workmanship and material under normal use from the date of original retail purchase of the Hardware. If the product proves defective during this warranty period, call Manufacturer Customer Service in order to obtain a Return Authorization number. Be sure to have a proof of purchase on hand when calling. Return requests cannot be processed without proof of purchase. When returning a product, mark the Return Authorization Number clearly on the package pack and include your original proof of purchase. In no event shall Manufacturer’s liability exceed the price paid for the product from direct, incidental or consequential damage resulting from the use of the product, its accompanying software, or its documentation. Manufacturer makes no warranty or representation, expressed, implied, or statutory, with 21 802.11g USB Network Adapter respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Manufacturer reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. 22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2004:09:02 12:32:38Z Modify Date : 2004:09:02 20:34:34+08:00 Page Count : 22 Creation Date : 2004:09:02 12:32:38Z Mod Date : 2004:09:02 20:34:34+08:00 Producer : Acrobat Distiller 5.0 (Windows) Author : WendyLiao Metadata Date : 2004:09:02 20:34:34+08:00 Creator : WendyLiao Title : Microsoft Word - WA4020 CD User Guide _NB_ with new FCC.docEXIF Metadata provided by EXIF.tools